Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies Author: | StormChaser | Posted: | Sep 25, 2016 01:28 | Subject: | Inventory Change Request for Set 9606-1 | Viewed: | 19 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory: [S=9606-1]
* Add 1 Book 9604b5 Set 9604 Activity Booklet 5 - Pneumatic Chair and Arm
Comments from Submitter:
Saw an opened set which included card. Card can also be seen in large image of set.
|
|
Author: | randyf | Posted: | Sep 24, 2016 16:11 | Subject: | Inventory Change Request for Set 75059-1 | Viewed: | 39 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Minifig sw527a R2-D2 (Flat Silver Head, Dark Blue Printing, Lavender Dots) (Alternate) (match ID 2)
* Change 1 Minifig sw527 R2-D2 (Flat Silver Head, Dark Blue Printing, Red Dots) {match ID 0 to 2}
Comments from Submitter:
http://www.bricklink.com/message.asp?ID=1009048
|
|
Author: | shawnxyz | Posted: | Sep 24, 2016 04:51 | Subject: | Re: Need to be able to set default search setting | Viewed: | 24 times | Topic: | Feedback | |
|
| | Yes please ... Because for us the first results are usually US based ... with
ridiculous postage.
|
Har har Really, is there a way to set the defaults for the search? Min part
#s would help too.
|
Author: | go4bob | Posted: | Sep 23, 2016 23:37 | Subject: | Inventory Change Request for Set 6180-1 | Viewed: | 28 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 4073 Trans-Neon Orange Plate, Round 1 x 1 Straight Side (Extra)
|
|
Author: | cosmicray | Posted: | Sep 23, 2016 22:49 | Subject: | Re: PLEASE enable Payment at checkout | Viewed: | 60 times | Topic: | Suggestions | |
|
| In Suggestions, Cob writes:
| Please make the site upgrade and enable payment at checkout. I have so many
buyers confused on what to do and how to pay. If they had the option to pay
at checkout it would be so much more streamlined and convenient for everyone.
I am fully prepared and ready to handle payment at checkout, I already give my
buyer the maximum they will be charged for shipping in my terms (and yes, I never
charge more than my terms state, even if I would lose money). Therefore, the
buyer already knows the cost of their order at checkout, why can't they pay
at checkout?
Cob
|
One of the things I am discovering about onsite payment, is that is achieves
very little in prodding buyers to complete payment. It saves me maybe 30-60 seconds
per order, but there is no added impetus for the buyer to complete payment quickly.
Therefore I wholeheartedly support this suggestion.
Ray
|
|
Author: | randyf | Posted: | Sep 23, 2016 20:29 | Subject: | Re: Inventory Change Request for Set 4842-1 | Viewed: | 23 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, mwright5 writes:
| Please make changes to the following inventory:
* Change 13 Part Reddish Brown {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) to 3794b Plate, Modified 1 x 2 with 1 Stud with Groove (Jumper)}
* Change 9 Part Dark Bluish Gray {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) to 3794b Plate, Modified 1 x 2 with 1 Stud with Groove (Jumper)}
* Change 1 Part Black {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) to 3794b Plate, Modified 1 x 2 with 1 Stud with Groove (Jumper)}
Comments from Submitter:
Hello, I'm trying to provide a change request to have all of the 3794 jumpers changed to 3794b, because that is what is in my set, which I bought new.
Thanks.
|
The jumpers with groove started appearing in 2010, so the first production run
of this set most likely had the ungrooved jumpers. These should be added as alternate
parts instead of outright changes.
Cheers,
Randy
|
|
Author: | mwright5 | Posted: | Sep 23, 2016 19:11 | Subject: | Inventory Change Request for Set 4842-1 | Viewed: | 20 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 13 Part Reddish Brown {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) to 3794b Plate, Modified 1 x 2 with 1 Stud with Groove (Jumper)}
* Change 9 Part Dark Bluish Gray {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) to 3794b Plate, Modified 1 x 2 with 1 Stud with Groove (Jumper)}
* Change 1 Part Black {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) to 3794b Plate, Modified 1 x 2 with 1 Stud with Groove (Jumper)}
Comments from Submitter:
Hello, I'm trying to provide a change request to have all of the 3794 jumpers changed to 3794b, because that is what is in my set, which I bought new.
Thanks.
|
|
Author: | randyf | Posted: | Sep 23, 2016 17:20 | Subject: | Inventory Change Request for Set 852921-1 | Viewed: | 19 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part Pearl Light Gray {4497u Minifig, Weapon Pike / Spear - Undetermined End to 4497 Minifig, Weapon Pike / Spear - Round End}
Comments from Submitter:
All evidence from my own sets and online videos and photos up to this point suggests that the newer spear appeared in the second half of 2012. Therefore, I am changing prior years to account for this.
|
|
Author: | randyf | Posted: | Sep 23, 2016 17:20 | Subject: | Inventory Change Request for Set 8085-1 | Viewed: | 14 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part Pearl Light Gray {4497u Minifig, Weapon Pike / Spear - Undetermined End to 4497 Minifig, Weapon Pike / Spear - Round End}
Comments from Submitter:
All evidence from my own sets and online videos and photos up to this point suggests that the newer spear appeared in the second half of 2012. Therefore, I am changing prior years to account for this.
|
|
Author: | randyf | Posted: | Sep 23, 2016 17:19 | Subject: | Inventory Change Request for Set 8077-1 | Viewed: | 10 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 2 Part Pearl Light Gray {4497u Minifig, Weapon Pike / Spear - Undetermined End to 4497 Minifig, Weapon Pike / Spear - Round End}
* Change 1 Part Pearl Light Gray {4497u Minifig, Weapon Pike / Spear - Undetermined End to 4497 Minifig, Weapon Pike / Spear - Round End} (Extra)
Comments from Submitter:
All evidence from my own sets and online videos and photos up to this point suggests that the newer spear appeared in the second half of 2012. Therefore, I am changing prior years to account for this.
|
|
Author: | randyf | Posted: | Sep 23, 2016 17:17 | Subject: | Inventory Change Request for Set 7952-20 | Viewed: | 11 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part Pearl Light Gray {4497u Minifig, Weapon Pike / Spear - Undetermined End to 4497 Minifig, Weapon Pike / Spear - Round End}
* Change 1 Part Pearl Light Gray {4497u Minifig, Weapon Pike / Spear - Undetermined End to 4497 Minifig, Weapon Pike / Spear - Round End} (Extra)
* Change 2 Part Flat Silver {4497u Minifig, Weapon Pike / Spear - Undetermined End to 4497 Minifig, Weapon Pike / Spear - Round End} (Alternate)
Comments from Submitter:
All evidence from my own sets and online videos and photos up to this point suggests that the newer spear appeared in the second half of 2012. Therefore, I am changing prior years to account for this.
|
|
Author: | randyf | Posted: | Sep 23, 2016 17:15 | Subject: | Inventory Change Request for Set 7952-4 | Viewed: | 9 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part Pearl Light Gray {4497u Minifig, Weapon Pike / Spear - Undetermined End to 4497 Minifig, Weapon Pike / Spear - Round End}
* Change 1 Part Flat Silver {4497u Minifig, Weapon Pike / Spear - Undetermined End to 4497 Minifig, Weapon Pike / Spear - Round End} (Alternate)
Comments from Submitter:
All evidence from my own sets and online videos and photos up to this point suggests that the newer spear appeared in the second half of 2012. Therefore, I am changing prior years to account for this.
|
|
Author: | randyf | Posted: | Sep 23, 2016 17:13 | Subject: | Inventory Change Request for Set 7947-1 | Viewed: | 8 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part Pearl Dark Gray {4497u Minifig, Weapon Pike / Spear - Undetermined End to 4497 Minifig, Weapon Pike / Spear - Round End}
* Change 1 Part Pearl Light Gray {4497u Minifig, Weapon Pike / Spear - Undetermined End to 4497 Minifig, Weapon Pike / Spear - Round End}
* Change 1 Part Flat Silver {4497u Minifig, Weapon Pike / Spear - Undetermined End to 4497 Minifig, Weapon Pike / Spear - Round End} (Alternate)
Comments from Submitter:
All evidence from my own sets and online videos and photos up to this point suggests that the newer spear appeared in the second half of 2012. Therefore, I am changing prior years to account for this.
|
|
Author: | randyf | Posted: | Sep 23, 2016 17:12 | Subject: | Inventory Change Request for Set 7946-1 | Viewed: | 9 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part Pearl Dark Gray {4497u Minifig, Weapon Pike / Spear - Undetermined End to 4497 Minifig, Weapon Pike / Spear - Round End}
* Change 1 Part Pearl Light Gray {4497u Minifig, Weapon Pike / Spear - Undetermined End to 4497 Minifig, Weapon Pike / Spear - Round End}
Comments from Submitter:
All evidence from my own sets and online videos and photos up to this point suggests that the newer spear appeared in the second half of 2012. Therefore, I am changing prior years to account for this.
|
|
Author: | randyf | Posted: | Sep 23, 2016 17:11 | Subject: | Inventory Change Request for Set 7573-1 | Viewed: | 10 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 2 Part Pearl Light Gray {4497u Minifig, Weapon Pike / Spear - Undetermined End to 4497 Minifig, Weapon Pike / Spear - Round End}
Comments from Submitter:
All evidence from my own sets and online videos and photos up to this point suggests that the newer spear appeared in the second half of 2012. Therefore, I am changing prior years to account for this.
|
|
Author: | randyf | Posted: | Sep 23, 2016 17:10 | Subject: | Inventory Change Request for Set 7571-1 | Viewed: | 7 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part Pearl Light Gray {4497u Minifig, Weapon Pike / Spear - Undetermined End to 4497 Minifig, Weapon Pike / Spear - Round End}
* Change 1 Part Flat Silver {4497u Minifig, Weapon Pike / Spear - Undetermined End to 4497 Minifig, Weapon Pike / Spear - Round End} (Alternate)
Comments from Submitter:
All evidence from my own sets and online videos and photos up to this point suggests that the newer spear appeared in the second half of 2012. Therefore, I am changing prior years to account for this.
|
|
Author: | randyf | Posted: | Sep 23, 2016 01:45 | Subject: | Inventory Change Request for Set 7572-1 | Viewed: | 22 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 3 Part Dark Brown {4497u Minifig, Weapon Pike / Spear - Undetermined End to 4497 Minifig, Weapon Pike / Spear - Round End}
Comments from Submitter:
All evidence from my own sets and online videos and photos up to this point suggests that the newer spear appeared in the second half of 2012. Therefore, I am changing prior years to account for this.
|
|
Author: | randyf | Posted: | Sep 23, 2016 01:44 | Subject: | Inventory Change Request for Set 7569-1 | Viewed: | 12 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 2 Part Dark Brown {4497u Minifig, Weapon Pike / Spear - Undetermined End to 4497 Minifig, Weapon Pike / Spear - Round End}
Comments from Submitter:
All evidence from my own sets and online videos and photos up to this point suggests that the newer spear appeared in the second half of 2012. Therefore, I am changing prior years to account for this.
|
|
Author: | randyf | Posted: | Sep 23, 2016 01:42 | Subject: | Inventory Change Request for Set 20017-1 | Viewed: | 9 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 2 Part Black {4497u Minifig, Weapon Pike / Spear - Undetermined End to 4497 Minifig, Weapon Pike / Spear - Round End}
Comments from Submitter:
All evidence from my own sets and online videos and photos up to this point suggests that the newer spear appeared in the second half of 2012. Therefore, I am changing prior years to account for this.
|
|
Author: | randyf | Posted: | Sep 23, 2016 01:41 | Subject: | Inventory Change Request for Set 9334-1 | Viewed: | 10 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part Black {4497u Minifig, Weapon Pike / Spear - Undetermined End to 4497 Minifig, Weapon Pike / Spear - Round End}
Comments from Submitter:
All evidence from my own sets and online videos and photos up to this point suggests that the newer spear appeared in the second half of 2012. Therefore, I am changing prior years to account for this.
|
|
Author: | Filip4444 | Posted: | Sep 23, 2016 01:40 | Subject: | Wanted list | Viewed: | 93 times | Topic: | Suggestions | Status: | Discarded | |
|
| Is it possible to add different settings per wanted list?
For example, I want to receive mail notifications when items on my first wanted
list become available in Europe and receive mail notifications when items on
my second wanted list become available in North America.
Many thanks!
|
|
Author: | randyf | Posted: | Sep 23, 2016 01:40 | Subject: | Inventory Change Request for Set 7952-6 | Viewed: | 10 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 2 Part Black {4497u Minifig, Weapon Pike / Spear - Undetermined End to 4497 Minifig, Weapon Pike / Spear - Round End}
Comments from Submitter:
All evidence from my own sets and online videos and photos up to this point suggests that the newer spear appeared in the second half of 2012. Therefore, I am changing prior years to account for this.
|
|
Author: | randyf | Posted: | Sep 23, 2016 01:24 | Subject: | Inventory Change Request for Minifig gb011 | Viewed: | 17 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part {Trans-Green to Trans-Bright Green} bb731 Arm Ghost Slimer, Left
* Change 1 Part {Trans-Green to Trans-Bright Green} bb732 Arm Ghost Slimer, Right
* Change 1 Part {Trans-Green to Trans-Bright Green} 21968pb02 Body Ghost, Slimer with Bright Pink Tongue, Bright Light Yellow Eyes and Top and Bottom Teeth Pattern
Comments from Submitter:
This figure is all Trans-Bright Green and not Trans-Green. The Slimer from LEGO Dimensions is Trans-Green.
|
|
Author: | jennnifer | Posted: | Sep 22, 2016 19:37 | Subject: | Inventory Change Request for Set 4867-1 | Viewed: | 10 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 2 Part 87421pb001 Tan Panel 3 x 3 x 6 Corner Wall without Bottom Indentations with Bricks Pattern 1 (Sticker) - Set 4842 (Counterpart)
* Add 2 Part 87421pb002 Tan Panel 3 x 3 x 6 Corner Wall without Bottom Indentations with Bricks Pattern 2 (Sticker) - Set 4842 (Counterpart)
* Add 2 Part 87421pb003 Tan Panel 3 x 3 x 6 Corner Wall without Bottom Indentations with Bricks Pattern 3 (Sticker) - Set 4842 (Counterpart)
Comments from Submitter:
These panels have the same stickers as set 4842-1.
|
|
Author: | criker | Posted: | Sep 22, 2016 18:52 | Subject: | Inventory Change Request for Set 1264-1 | Viewed: | 11 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change {1 to 2} Part Yellow 3004 Brick 1 x 2
|
Author: | tanczy | Posted: | Sep 22, 2016 18:15 | Subject: | Inventory Change Request for Set 8853-1 | Viewed: | 12 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 4 Part 4273a Light Gray Technic, Axle and Pin Connector Toggle Joint Toothed - Without Slots (Alternate) (match ID 1)
Comments from Submitter:
I've an original set with 4273a which is released between 1981 - 1991. Because the set is from 1988, I think it's absolutely normal.
|
|
Author: | Brixalotl | Posted: | Sep 22, 2016 16:54 | Subject: | Inventory Change Request for Set 76056-1 | Viewed: | 24 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 87421pb034 Tan Panel 3 x 3 x 6 Corner Wall without Bottom Indentations with Brick Wall with Heart and Fountain of Youth Plaque Pattern (Sticker) - Set 76056 (Counterpart)
* Add 1 Part 14769pb142 Tan Tile, Round 2 x 2 with Bottom Stud Holder with Demon Head in Carved Stone Pattern (Sticker) - Set 76056 (Counterpart)
Comments from Submitter:
adding counterparts, thanks
|
|
Author: | randyf | Posted: | Sep 22, 2016 13:37 | Subject: | Inventory Change Request for Set 10193-1 | Viewed: | 22 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 3 Part Pearl Light Gray {4497u Minifig, Weapon Pike / Spear - Undetermined End to 4497 Minifig, Weapon Pike / Spear - Round End}
* Change 3 Part Flat Silver {4497u Minifig, Weapon Pike / Spear - Undetermined End to 4497 Minifig, Weapon Pike / Spear - Round End} (Alternate)
Comments from Submitter:
All evidence from my own sets and online videos and photos up to this point suggests that the newer spear appeared in the second half of 2012. Therefore, I am changing prior years to account for this.
|
|
Author: | randyf | Posted: | Sep 22, 2016 13:33 | Subject: | Inventory Change Request for Set 7097-1 | Viewed: | 10 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 2 Part Dark Brown {4497u Minifig, Weapon Pike / Spear - Undetermined End to 4497 Minifig, Weapon Pike / Spear - Round End}
Comments from Submitter:
All evidence from my own sets and online videos and photos up to this point suggests that the newer spear appeared in the second half of 2012. Therefore, I am changing prior years to account for this.
|
|
Author: | randyf | Posted: | Sep 22, 2016 13:33 | Subject: | Inventory Change Request for Set 7078-1 | Viewed: | 12 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 2 Part Dark Brown {4497u Minifig, Weapon Pike / Spear - Undetermined End to 4497 Minifig, Weapon Pike / Spear - Round End}
Comments from Submitter:
All evidence from my own sets and online videos and photos up to this point suggests that the newer spear appeared in the second half of 2012. Therefore, I am changing prior years to account for this.
|
|
Author: | randyf | Posted: | Sep 22, 2016 13:32 | Subject: | Inventory Change Request for Set 8038-1 | Viewed: | 12 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part Black {4497u Minifig, Weapon Pike / Spear - Undetermined End to 4497 Minifig, Weapon Pike / Spear - Round End}
Comments from Submitter:
All evidence from my own sets and online videos and photos up to this point suggests that the newer spear appeared in the second half of 2012. Therefore, I am changing prior years to account for this.
|
|
Author: | randyf | Posted: | Sep 22, 2016 13:31 | Subject: | Inventory Change Request for Set 7079-1 | Viewed: | 19 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part Black {4497u Minifig, Weapon Pike / Spear - Undetermined End to 4497 Minifig, Weapon Pike / Spear - Round End}
Comments from Submitter:
All evidence from my own sets and online videos and photos up to this point suggests that the newer spear appeared in the second half of 2012. Therefore, I am changing prior years to account for this.
|
|
Author: | randyf | Posted: | Sep 22, 2016 03:51 | Subject: | Inventory Change Request for Set 70155-1 | Viewed: | 17 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part Flat Silver {4497u Minifig, Weapon Pike / Spear - Undetermined End to 93789 Minifig, Weapon Pike / Spear - Flat End}
Comments from Submitter:
Online photo and video evidence shows only flat end versions.
|
|
Author: | randyf | Posted: | Sep 22, 2016 03:42 | Subject: | Inventory Change Request for Set 9564-1 | Viewed: | 13 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part Pearl Gold {4497u Minifig, Weapon Pike / Spear - Undetermined End to 4497 Minifig, Weapon Pike / Spear - Round End}
Comments from Submitter:
My set contained the round end version, and online video and photo evidence also shows that this is the correct version.
|
|
Author: | randyf | Posted: | Sep 22, 2016 03:36 | Subject: | Inventory Change Request for Set 2257-1 | Viewed: | 18 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part Pearl Gold {4497u Minifig, Weapon Pike / Spear - Undetermined End to 4497 Minifig, Weapon Pike / Spear - Round End}
Comments from Submitter:
Online photo and video evidence shows only round end versions.
|
|
Author: | randyf | Posted: | Sep 22, 2016 03:29 | Subject: | Inventory Change Request for Set 44016-1 | Viewed: | 12 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 93789 Pearl Dark Gray Minifig, Weapon Pike / Spear - Flat End (Alternate) (match ID 1)
* Change 1 Part Pearl Dark Gray {4497u Minifig, Weapon Pike / Spear - Undetermined End to 4497 Minifig, Weapon Pike / Spear - Round End} {match ID 0 to 1}
Comments from Submitter:
My set contained the flat end version, but I found online video evidence that shows that the round end version was included at times.
|
|
Author: | AfolLady | Posted: | Sep 22, 2016 02:05 | Subject: | Re: Showed the total weight in cart | Viewed: | 36 times | Topic: | Suggestions | |
|
| In Suggestions, lkh81 writes:
| Hi,
It would be good if users are able to see the total weight(item * quantity) whenever
they add anything to their cart.
I am currently doing things via excel. And trying to find the weight of each
individual items.
|
Yes of course, go to your BL page, My Order Setting, and select ''Show
Item Weight''
|
Author: | bb780476 | Posted: | Sep 22, 2016 01:06 | Subject: | Showed the total weight in cart | Viewed: | 110 times | Topic: | Suggestions | Status: | Implemented | |
|
| Hi,
It would be good if users are able to see the total weight(item * quantity) whenever
they add anything to their cart.
I am currently doing things via excel. And trying to find the weight of each
individual items.
|
|
Author: | Macaronis | Posted: | Sep 21, 2016 17:42 | Subject: | Re: BL Message Invoice Option... | Viewed: | 42 times | Topic: | Suggestions | |
|
| | | When I saw your Message I thought to myself maybe there is a setting I didn't
have checked. when I go to invoice there are only two options and one is send
to user but that isn't through the BL messaging System, its the one that
sends it directly to email. The other option is email to self. If you want to
send it as a Custom BL message so they get it only on BL I can only do it if
I copy and paste the printed version to then send that invoice message. Hence
why I figured it might be an nice option to have. If there is some hidden option
to make this auto send to the BL message system I could really use a leg up on
that. I've been getting annoyed at having to copy and paste the invoice into
the actual BL message for a buyer. If you know something I do I'd love to
have that secret...
|
Check this page:
http://www.bricklink.com/pref_contact.asp
|
Figures... All these years and I somehow missed this.. Thank you!!!
+10
W
|
|
Author: | therobo | Posted: | Sep 21, 2016 17:36 | Subject: | Re: BL Message Invoice Option... | Viewed: | 44 times | Topic: | Suggestions | |
|
| In Suggestions, Macaronis writes:
| In Suggestions, edeevo writes:
| In Suggestions, Macaronis writes:
| You know all the years I have been here and it just dawned on me. I dug around
and never saw this as a suggestion or at least I do not think I have.
When Invoicing why not just add the ability as a Check Box to Send as a (BL message
INVOICE), Rather then a Copy and Paste if your someone who sends your invoice
as a BL message rather then a straight email.
All the stuff for this to happen is already in place... just need to make some
code additions to the Invoice window.
W
|
Maybe I'm misunderstanding, but isn't this already in place? When I
send invoices to my Buyers, it is sent as both a BL message *and* an e-mail...
Life is Good.
~Ed.
|
When I saw your Message I thought to myself maybe there is a setting I didn't
have checked. when I go to invoice there are only two options and one is send
to user but that isn't through the BL messaging System, its the one that
sends it directly to email. The other option is email to self. If you want to
send it as a Custom BL message so they get it only on BL I can only do it if
I copy and paste the printed version to then send that invoice message. Hence
why I figured it might be an nice option to have. If there is some hidden option
to make this auto send to the BL message system I could really use a leg up on
that. I've been getting annoyed at having to copy and paste the invoice into
the actual BL message for a buyer. If you know something I do I'd love to
have that secret...
|
Check this page:
http://www.bricklink.com/pref_contact.asp
|
|
Author: | Macaronis | Posted: | Sep 21, 2016 17:30 | Subject: | Re: BL Message Invoice Option... | Viewed: | 35 times | Topic: | Suggestions | |
|
| In Suggestions, edeevo writes:
| In Suggestions, Macaronis writes:
| You know all the years I have been here and it just dawned on me. I dug around
and never saw this as a suggestion or at least I do not think I have.
When Invoicing why not just add the ability as a Check Box to Send as a (BL message
INVOICE), Rather then a Copy and Paste if your someone who sends your invoice
as a BL message rather then a straight email.
All the stuff for this to happen is already in place... just need to make some
code additions to the Invoice window.
W
|
Maybe I'm misunderstanding, but isn't this already in place? When I
send invoices to my Buyers, it is sent as both a BL message *and* an e-mail...
Life is Good.
~Ed.
|
When I saw your Message I thought to myself maybe there is a setting I didn't
have checked. when I go to invoice there are only two options and one is send
to user but that isn't through the BL messaging System, its the one that
sends it directly to email. The other option is email to self. If you want to
send it as a Custom BL message so they get it only on BL I can only do it if
I copy and paste the printed version to then send that invoice message. Hence
why I figured it might be an nice option to have. If there is some hidden option
to make this auto send to the BL message system I could really use a leg up on
that. I've been getting annoyed at having to copy and paste the invoice into
the actual BL message for a buyer. If you know something I do I'd love to
have that secret...
|
|
Author: | Macaronis | Posted: | Sep 21, 2016 17:20 | Subject: | Re: BL Message Invoice Option... | Viewed: | 31 times | Topic: | Suggestions | |
|
| In Suggestions, edeevo writes:
| In Suggestions, Macaronis writes:
| You know all the years I have been here and it just dawned on me. I dug around
and never saw this as a suggestion or at least I do not think I have.
When Invoicing why not just add the ability as a Check Box to Send as a (BL message
INVOICE), Rather then a Copy and Paste if your someone who sends your invoice
as a BL message rather then a straight email.
All the stuff for this to happen is already in place... just need to make some
code additions to the Invoice window.
W
|
Maybe I'm misunderstanding, but isn't this already in place? When I
send invoices to my Buyers, it is sent as both a BL message *and* an e-mail...
Life is Good.
~Ed.
|
If this is True then maybe I must be missing something... Hold that thought...
|
|
Author: | edeevo | Posted: | Sep 21, 2016 17:15 | Subject: | Re: BL Message Invoice Option... | Viewed: | 61 times | Topic: | Suggestions | |
|
| In Suggestions, Macaronis writes:
| You know all the years I have been here and it just dawned on me. I dug around
and never saw this as a suggestion or at least I do not think I have.
When Invoicing why not just add the ability as a Check Box to Send as a (BL message
INVOICE), Rather then a Copy and Paste if your someone who sends your invoice
as a BL message rather then a straight email.
All the stuff for this to happen is already in place... just need to make some
code additions to the Invoice window.
W
|
Maybe I'm misunderstanding, but isn't this already in place? When I
send invoices to my Buyers, it is sent as both a BL message *and* an e-mail...
Life is Good.
~Ed.
|
|
Author: | Vandenbril | Posted: | Sep 21, 2016 06:52 | Subject: | Inventory Change Request for Set 10252-1 | Viewed: | 30 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 87994 Black Bar 3L (Bar Arrow) (Extra)
* Add 1 Part 4592c02 Black Lever Small Base with Black Lever (Extra)
* Add 2 Part 3024 Black Plate 1 x 1 (Extra)
* Add 1 Part 4073 Black Plate, Round 1 x 1 Straight Side (Extra)
* Add 1 Part 2780 Black Technic, Pin with Friction Ridges Lengthwise WITH Center Slots (Extra)
* Add 2 Part 4274 Blue Technic, Pin 1/2 (Extra)
* Add 3 Part 3024 Dark Azure Plate 1 x 1 (Extra)
* Add 3 Part 54200 Dark Azure Slope 30 1 x 1 x 2/3 (Extra)
* Add 3 Part 3070b Dark Azure Tile 1 x 1 with Groove (Extra)
* Add 2 Part 3024 Dark Bluish Gray Plate 1 x 1 (Extra)
* Add 1 Part 4073 Flat Silver Plate, Round 1 x 1 Straight Side (Extra)
* Add 1 Part 98138pb010 Flat Silver Tile, Round 1 x 1 with Gauge with Red Pointer Pattern (Extra)
* Add 1 Part 98138pb033 Flat Silver Tile, Round 1 x 1 with Soda Pop Can Top Pattern (Extra)
* Add 2 Part 48729b Light Bluish Gray Bar 1L with Clip Mechanical Claw, Cut Edges and Hole on One Side (Extra)
* Add 1 Part 3024 Light Bluish Gray Plate 1 x 1 (Extra)
* Add 1 Part 85861 Light Bluish Gray Plate, Round 1 x 1 with Open Stud (Extra)
* Add 1 Part 54200 Light Bluish Gray Slope 30 1 x 1 x 2/3 (Extra)
* Add 1 Part 4265c Light Bluish Gray Technic Bush 1/2 Smooth (Extra)
* Add 2 Part 3070b Light Bluish Gray Tile 1 x 1 with Groove (Extra)
* Add 1 Part 24246 Light Bluish Gray Tile 1 x 1 Half Circle Extended (Stadium) with Groove (Extra)
* Add 2 Part 98138 Light Bluish Gray Tile, Round 1 x 1 (Extra)
* Add 2 Part 98138pb058 Light Bluish Gray Tile, Round 1 x 1 with VW Logo Pattern (Extra)
* Add 2 Part 3713 Red Technic Bush (Extra)
* Add 3 Part 3024 Tan Plate 1 x 1 (Extra)
* Add 1 Part 3070b Tan Tile 1 x 1 with Groove (Extra)
* Add 1 Part 54200 Trans-Medium Blue Slope 30 1 x 1 x 2/3 (Extra)
* Add 1 Part 4073 Trans-Orange Plate, Round 1 x 1 Straight Side (Extra)
* Add 1 Part 24246 Trans-Orange Tile 1 x 1 Half Circle Extended (Stadium) with Groove (Extra)
* Add 1 Part 3070b Trans-Red Tile 1 x 1 with Groove (Extra)
* Add 2 Part 3024 White Plate 1 x 1 (Extra)
* Add 2 Part 4073 White Plate, Round 1 x 1 Straight Side (Extra)
* Add 1 Part 3070b White Tile 1 x 1 with Groove (Extra)
* Add 2 Part 4265c Yellow Technic Bush 1/2 Smooth (Extra)
* Add 1 Part 3070b Yellow Tile 1 x 1 with Groove (Extra)
|
|
Author: | BigBBricks | Posted: | Sep 21, 2016 03:33 | Subject: | Inventory Change Request for Set 40203-1 | Viewed: | 22 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 53451 Black Barb / Claw / Horn - Small (Extra)
* Add 1 Part 53451 White Barb / Claw / Horn - Small (Extra)
* Add 1 Part 3024 Black Plate 1 x 1 (Extra)
* Add 1 Part 3024 Dark Bluish Gray Plate 1 x 1 (Extra)
* Add 1 Part 3024 Light Bluish Gray Plate 1 x 1 (Extra)
* Add 1 Part 54200 Black Slope 30 1 x 1 x 2/3 (Extra)
* Add 1 Part 54200 Dark Purple Slope 30 1 x 1 x 2/3 (Extra)
* Add 1 Part 54200 Light Bluish Gray Slope 30 1 x 1 x 2/3 (Extra)
* Add 1 Part 98138pb007 White Tile, Round 1 x 1 with Black Eye with Pupil Pattern (Extra)
Comments from Submitter:
Verified via set build
|
|
Author: | kwitczak | Posted: | Sep 20, 2016 23:14 | Subject: | Inventory Change Request for Set 9474-1 | Viewed: | 18 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 30292 Dark Green Flag 7 x 3 with Rod (Counterpart)
* Add 1 Part 30350c Reddish Brown Tile, Modified 2 x 3 with 2 Clips (thick U clips) (Counterpart)
* Add 1 Part 87421 Light Bluish Gray Panel 3 x 3 x 6 Corner Wall without Bottom Indentations (Counterpart)
* Add 1 Part 87421 Light Bluish Gray Panel 3 x 3 x 6 Corner Wall without Bottom Indentations (Counterpart)
* Add 1 Part 87421 Light Bluish Gray Panel 3 x 3 x 6 Corner Wall without Bottom Indentations (Counterpart)
* Add 1 Part 87421 Light Bluish Gray Panel 3 x 3 x 6 Corner Wall without Bottom Indentations (Counterpart)
Comments from Submitter:
Submitting counterparts for items with stickers already applied
|
|
Author: | jennnifer | Posted: | Sep 20, 2016 14:33 | Subject: | Inventory Change Request for Set 4738-1 | Viewed: | 25 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 2 Part 2454pb116 Light Bluish Gray Brick 1 x 2 x 5 with Bricks with Dark Green Moss Pattern (Sticker) - Set 4738 (Counterpart)
* Add 1 Part 87421pb033 Light Bluish Gray Panel 3 x 3 x 6 Corner Wall without Bottom Indentations with Bricks with Dark Green Moss and Portrait on Inside Pattern 1 (Stickers) - Set 473 (Counterpart)
|
|
Author: | bb617011 | Posted: | Sep 20, 2016 13:37 | Subject: | Updated Site Stats, on Statistics page | Viewed: | 128 times | Topic: | Suggestions | Status: | Open | Vote: | [Yes|No] | |
|
| I know this isn't high priority, but I also don't think it should be
too hard to update. Is there a way we can see updated stats since 2013 on the
Statistics page? It helps us understand the health and growth of bricklink, plus
it is super cool.
Thanks!
|
|
Author: | RobErNat | Posted: | Sep 20, 2016 13:16 | Subject: | Re: Inventory Change Request for Minifig cas095 | Viewed: | 26 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, therobo writes:
| In Inventories Requests, Fran_ writes:
| In Inventories Requests, therobo writes:
| Have you read the notes on the inventory?
|
Yes I have, but as I said this is not quite right. The original minifigure has
the solid stud head, and the newest ones had the blocked open stud
|
The notes say that early copies have the solid stud head, so it's the same
as you said, just differently worded.
|
As far as I know, minifigs are inventoried with the first head they are 'found'
with.
This means that if someone finds it with a 'b' type head first, then
the fig get's inventoried with that head (alltough it is possible many more
figs are found with the 'c'type head). Occasionaly figs are found with
a 'c' type, and later on people find the 'b' type of heads, but
the figs remain with 'c' type, as that's how they are first found
with...
Following that logic, the 'a' type was 'before' the 'b'
type, so the first one found, is 'a' type, the 'b' type for this
particular fig came much much later. It has only been recently BL inventory admins
started to approve changes from 'b' to 'a' type 'still whished
there would be the 'alternate' head option), so from a logic point of
view the request should be 'approved' by the IA's and the cadmins
should change the note towards Y2K re-issues would carry a 'blocked open
stud', as it would better fit the timeline and current 'policy' on
the heads.
my 2 cents
|
|
Author: | yorbrick | Posted: | Sep 20, 2016 08:43 | Subject: | Re: Inventory Change Request for Minifig cas095 | Viewed: | 32 times | Topic: | Inventories Requests | |
|
| | Let's put it this way. I find on Bricklink a "complete" set 6067. I buy it.
And then it happens that all the minifigs have blocked open stud heads. But anyway,
according to Bricklink inventary as it is now (with three out of four minifigs
having the blocked open stud heads), the set is correct.
And no, it is not: The 6067 set has solid stud heads, the 100000 set has blocked
open ones.
What do we do?
|
Ask the seller which version the head is.
They won't have two different versions of the same minifigure with different
head studs in the catalogue. There are many instances where sets have come with
both blocked open and recessed studs and only one is catalogued.
You are correct that you might get the wrong head with a complete set. But then
if you reverse it, buyers of 10000-1 would get the wrong heads.
|
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|