|
|
| | Author: | SezaR | Posted: | Dec 20, 2021 00:06 | Subject: | Inventory Change Request for Set 918-1 | Viewed: | 37 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 926stk02 (Not Applicable) Sticker Sheet for Set 926 - Sheet 2 (199014)
* Add 1 Minifigure sp127 Classic Space - Red with Airtanks, Torso Plain (match ID 1)
* Add 1 Minifigure sp064 Classic Space - Red with Airtanks, Stickered Torso Pattern (Counterpart)
* Change 1 Minifigure sp005 Classic Space - Red with Airtanks {Regular to Alternate} {match ID 0 to 1}
|
|
| | | | | |
| | | | Author: | SezaR | Posted: | Dec 20, 2021 00:11 | Subject: | Re: Inventory Change Request for Set 918-1 | Viewed: | 26 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, SezaR writes:
| Please make changes to the following inventory:
* Add 1 Part 926stk02 (Not Applicable) Sticker Sheet for Set 926 - Sheet 2 (199014)
* Add 1 Minifigure sp127 Classic Space - Red with Airtanks, Torso Plain (match ID 1)
* Add 1 Minifigure sp064 Classic Space - Red with Airtanks, Stickered Torso Pattern (Counterpart)
* Change 1 Minifigure sp005 Classic Space - Red with Airtanks {Regular to Alternate} {match ID 0 to 1}
|
The photo from this link
https://www.bricklink.com/message.asp?ID=1319229
shows one sticker applied on the red minifig with catalog (or a similar one in
different language)
from 1979.
I believe and have heard from collectors that all classic space sets from 1979
came first with sticker sheets for minifigs but so far, they are added to only
a couple of sets.
|
|
|
|
| | | | | | | | | |
| | | | | | Author: | randyf | Posted: | Dec 20, 2021 13:16 | Subject: | Re: Inventory Change Request for Set 918-1 | Viewed: | 32 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, SezaR writes:
| In Inventories Requests, SezaR writes:
| Please make changes to the following inventory:
* Add 1 Part 926stk02 (Not Applicable) Sticker Sheet for Set 926 - Sheet 2 (199014)
* Add 1 Minifigure sp127 Classic Space - Red with Airtanks, Torso Plain (match ID 1)
* Add 1 Minifigure sp064 Classic Space - Red with Airtanks, Stickered Torso Pattern (Counterpart)
* Change 1 Minifigure sp005 Classic Space - Red with Airtanks {Regular to Alternate} {match ID 0 to 1}
|
The photo from this link
https://www.bricklink.com/message.asp?ID=1319229
shows one sticker applied on the red minifig with catalog (or a similar one in
different language)
from 1979.
I believe and have heard from collectors that all classic space sets from 1979
came first with sticker sheets for minifigs but so far, they are added to only
a couple of sets.
|
A new sticker sheet entry will first need to be created if it is in fact the
same one as listed in your change request. For now, we don't make combined
sticker sheet entries for sheets that come in three or less sets.
|
|
|
| | | | | | | | | | | | | |
| | | | | | | | Author: | SezaR | Posted: | Dec 20, 2021 14:08 | Subject: | Re: Inventory Change Request for Set 918-1 | Viewed: | 27 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, randyf writes:
| In Inventories Requests, SezaR writes:
| In Inventories Requests, SezaR writes:
| Please make changes to the following inventory:
* Add 1 Part 926stk02 (Not Applicable) Sticker Sheet for Set 926 - Sheet 2 (199014)
* Add 1 Minifigure sp127 Classic Space - Red with Airtanks, Torso Plain (match ID 1)
* Add 1 Minifigure sp064 Classic Space - Red with Airtanks, Stickered Torso Pattern (Counterpart)
* Change 1 Minifigure sp005 Classic Space - Red with Airtanks {Regular to Alternate} {match ID 0 to 1}
|
The photo from this link
https://www.bricklink.com/message.asp?ID=1319229
shows one sticker applied on the red minifig with catalog (or a similar one in
different language)
from 1979.
I believe and have heard from collectors that all classic space sets from 1979
came first with sticker sheets for minifigs but so far, they are added to only
a couple of sets.
|
A new sticker sheet entry will first need to be created if it is in fact the
same one as listed in your change request. For now, we don't make combined
sticker sheet entries for sheets that come in three or less sets.
|
What about 4 sets or more?
|
|
|
| | | | | | | | | | | | | | | | | |
| | | | | | | | | | Author: | randyf | Posted: | Dec 20, 2021 17:11 | Subject: | Re: Inventory Change Request for Set 918-1 | Viewed: | 32 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, SezaR writes:
| In Inventories Requests, randyf writes:
| In Inventories Requests, SezaR writes:
| In Inventories Requests, SezaR writes:
| Please make changes to the following inventory:
* Add 1 Part 926stk02 (Not Applicable) Sticker Sheet for Set 926 - Sheet 2 (199014)
* Add 1 Minifigure sp127 Classic Space - Red with Airtanks, Torso Plain (match ID 1)
* Add 1 Minifigure sp064 Classic Space - Red with Airtanks, Stickered Torso Pattern (Counterpart)
* Change 1 Minifigure sp005 Classic Space - Red with Airtanks {Regular to Alternate} {match ID 0 to 1}
|
The photo from this link
https://www.bricklink.com/message.asp?ID=1319229
shows one sticker applied on the red minifig with catalog (or a similar one in
different language)
from 1979.
I believe and have heard from collectors that all classic space sets from 1979
came first with sticker sheets for minifigs but so far, they are added to only
a couple of sets.
|
A new sticker sheet entry will first need to be created if it is in fact the
same one as listed in your change request. For now, we don't make combined
sticker sheet entries for sheets that come in three or less sets.
|
What about 4 sets or more?
|
Four sets or more gets a "multistk" entry. For example:
[p=multistk0001]
|
|
|
| | | | | | | | | | | | | | | | | | | | | |
| | | | | | | | | | | | Author: | SezaR | Posted: | Dec 23, 2021 21:00 | Subject: | Re: Inventory Change Request for Set 918-1 | Viewed: | 36 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, randyf writes:
| In Inventories Requests, SezaR writes:
| In Inventories Requests, randyf writes:
| In Inventories Requests, SezaR writes:
| In Inventories Requests, SezaR writes:
| Please make changes to the following inventory:
* Add 1 Part 926stk02 (Not Applicable) Sticker Sheet for Set 926 - Sheet 2 (199014)
* Add 1 Minifigure sp127 Classic Space - Red with Airtanks, Torso Plain (match ID 1)
* Add 1 Minifigure sp064 Classic Space - Red with Airtanks, Stickered Torso Pattern (Counterpart)
* Change 1 Minifigure sp005 Classic Space - Red with Airtanks {Regular to Alternate} {match ID 0 to 1}
|
The photo from this link
https://www.bricklink.com/message.asp?ID=1319229
shows one sticker applied on the red minifig with catalog (or a similar one in
different language)
from 1979.
I believe and have heard from collectors that all classic space sets from 1979
came first with sticker sheets for minifigs but so far, they are added to only
a couple of sets.
|
A new sticker sheet entry will first need to be created if it is in fact the
same one as listed in your change request. For now, we don't make combined
sticker sheet entries for sheets that come in three or less sets.
|
What about 4 sets or more?
|
Four sets or more gets a "multistk" entry. For example:
[p=multistk0001]
|
Hi Randy,
Eventually, all classic sets from 1979 should come with these sticker sheets.
There are 19 sets.
https://www.bricklink.com/catalogList.asp?catType=S&catString=34.314
At this point, there is no perfect evidence for these sticker sheets for all
these 19 sets but there has been multiple reports that they came with these sticker
sheets in early production runs.
If we create new sticker sheets, we will need to remove them later. Not very
good. So I hope we can make an exception for this set (and these sets) for
now.
|
|
|
| | | | | | | | | | | | | | | | | | | | | | | | | |
| | | | | | | | | | | | | | Author: | randyf | Posted: | Dec 25, 2021 02:39 | Subject: | Re: Inventory Change Request for Set 918-1 | Viewed: | 25 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, SezaR writes:
| In Inventories Requests, randyf writes:
| In Inventories Requests, SezaR writes:
| In Inventories Requests, randyf writes:
| A new sticker sheet entry will first need to be created if it is in fact the
same one as listed in your change request. For now, we don't make combined
sticker sheet entries for sheets that come in three or less sets.
|
What about 4 sets or more?
|
Four sets or more gets a "multistk" entry. For example:
[p=multistk0001]
|
Hi Randy,
Eventually, all classic sets from 1979 should come with these sticker sheets.
There are 19 sets.
https://www.bricklink.com/catalogList.asp?catType=S&catString=34.314
At this point, there is no perfect evidence for these sticker sheets for all
these 19 sets but there has been multiple reports that they came with these sticker
sheets in early production runs.
If we create new sticker sheets, we will need to remove them later. Not very
good. So I hope we can make an exception for this set (and these sets) for
now.
|
Merging entries later is very easy, so for now please stick to the way
things are done until the sticker sheet is officially listed in more than three
sets.
|
|
|
| | | | | | | | | | | | | | | | | | | | | | | | | |
| | | | | | | | | | | | | | Author: | TakeAbricK | Posted: | Feb 18, 2022 06:10 | Subject: | Re: Inventory Change Request for Set 918-1 | Viewed: | 23 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, SezaR writes:
| In Inventories Requests, randyf writes:
| In Inventories Requests, SezaR writes:
| In Inventories Requests, randyf writes:
| In Inventories Requests, SezaR writes:
| In Inventories Requests, SezaR writes:
| Please make changes to the following inventory:
* Add 1 Part 926stk02 (Not Applicable) Sticker Sheet for Set 926 - Sheet 2 (199014)
* Add 1 Minifigure sp127 Classic Space - Red with Airtanks, Torso Plain (match ID 1)
* Add 1 Minifigure sp064 Classic Space - Red with Airtanks, Stickered Torso Pattern (Counterpart)
* Change 1 Minifigure sp005 Classic Space - Red with Airtanks {Regular to Alternate} {match ID 0 to 1}
|
The photo from this link
https://www.bricklink.com/message.asp?ID=1319229
shows one sticker applied on the red minifig with catalog (or a similar one in
different language)
from 1979.
I believe and have heard from collectors that all classic space sets from 1979
came first with sticker sheets for minifigs but so far, they are added to only
a couple of sets.
|
A new sticker sheet entry will first need to be created if it is in fact the
same one as listed in your change request. For now, we don't make combined
sticker sheet entries for sheets that come in three or less sets.
|
What about 4 sets or more?
|
Four sets or more gets a "multistk" entry. For example:
[p=multistk0001]
|
Hi Randy,
Eventually, all classic sets from 1979 should come with these sticker sheets.
There are 19 sets.
https://www.bricklink.com/catalogList.asp?catType=S&catString=34.314
At this point, there is no perfect evidence for these sticker sheets for all
these 19 sets but there has been multiple reports that they came with these sticker
sheets in early production runs.
If we create new sticker sheets, we will need to remove them later. Not very
good. So I hope we can make an exception for this set (and these sets) for
now.
|
As said before the stickersheet can't be approved for this set.
As long as there's no stickersheet in this set, the other requests can't
be approved either. So please add the stickersheet to the catalog, so we can
finish these requests.
Thank you.
Diana
|
|
|
| | | | | | | | | | | | | | | | | | | | | | | | | |
| | | | | | | | | | | | | | Author: | peregrinator | Posted: | Feb 18, 2022 07:50 | Subject: | Re: Inventory Change Request for Set 918-1 | Viewed: | 18 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, SezaR writes:
| Eventually, all classic sets from 1979 should come with these sticker sheets.
There are 19 sets.
https://www.bricklink.com/catalogList.asp?catType=S&catString=34.314
At this point, there is no perfect evidence for these sticker sheets for all
these 19 sets but there has been multiple reports that they came with these sticker
sheets in early production runs.
|
I wonder if there was a difference between Canadian/European versions and USA
versions. I owned 462, 483, 487, and 497 that I can clearly recall, and never
saw a stickered torso.
|
|
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
| | | | | | | | | | | | | | | | Author: | TakeAbricK | Posted: | Feb 23, 2022 02:45 | Subject: | Re: Inventory Change Request for Set 918-1 | Viewed: | 23 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, peregrinator writes:
| In Inventories Requests, SezaR writes:
| Eventually, all classic sets from 1979 should come with these sticker sheets.
There are 19 sets.
https://www.bricklink.com/catalogList.asp?catType=S&catString=34.314
At this point, there is no perfect evidence for these sticker sheets for all
these 19 sets but there has been multiple reports that they came with these sticker
sheets in early production runs.
|
I wonder if there was a difference between Canadian/European versions and USA
versions. I owned 462, 483, 487, and 497 that I can clearly recall, and never
saw a stickered torso.
|
Both versions were released in 1979, but so far there's no evidence that
these 8 sets had stickersheets indeed.
-----------------------------------
-----------------------------------
-----------------------------------
Diana
|
|
|
|
|
|