|
 |
| | | Author: | WoutR  | | Posted: | Apr 24, 2023 08:09 | | Subject: | Wanted – 2011 Ninjago spinner parts | | Viewed: | 114 times | | Topic: | Wanted | |
|
| Wanted – 2011 Ninjago spinner parts
The 2011 Ninjago spinner sets used some common parts with alternative part numbers.
I am looking for those parts (in any colour) with those alternative part numbers
moulded into them.
Buying new sets would help me find these parts, but that gets expensive quickly.
I would buy used sets with these parts, but over time most of these parts have
been replaced by their regular versions (probably except the boat stud under
the turntable).
I am looking for:
with part number 94148
with part number 93788, according to the catalog notes this will be
the “solid plastic” version instead of the “more rubbery” version.
with part number 93791
with part number 93792
with part number 93790
with part number 93793
I do not yet know if parts 63965 and 4085d already had design numbers moulded
into them, or if the parts were to small for that at that time.
Part numbers 93787, 93789 and 93794 also fit within this range or part numbers,
but these do have their own catalog entry so they are easier to find 
These parts were used in the following sets:
I am looking for sellers who either have the parts with the listed part numbers,
or who can confirm their used sets still contain the mentioned numbers.
|
|
|
| | | | | |
| | | | | Author: | here4bricks614 | | Posted: | Apr 24, 2023 10:08 | | Subject: | Re: Wanted – 2011 Ninjago spinner parts | | Viewed: | 41 times | | Topic: | Wanted | |
|
| In Wanted, WoutR writes:
| | Wanted – 2011 Ninjago spinner parts
The 2011 Ninjago spinner sets used some common parts with alternative part numbers.
I am looking for those parts (in any colour) with those alternative part numbers
moulded into them.
Buying new sets would help me find these parts, but that gets expensive quickly.
I would buy used sets with these parts, but over time most of these parts have
been replaced by their regular versions (probably except the boat stud under
the turntable).
I am looking for:
with part number 94148
with part number 93788, according to the catalog notes this will be
the “solid plastic” version instead of the “more rubbery” version.
with part number 93791
with part number 93792
with part number 93790
with part number 93793
I do not yet know if parts 63965 and 4085d already had design numbers moulded
into them, or if the parts were to small for that at that time.
Part numbers 93787, 93789 and 93794 also fit within this range or part numbers,
but these do have their own catalog entry so they are easier to find
These parts were used in the following sets:
I am looking for sellers who either have the parts with the listed part numbers,
or who can confirm their used sets still contain the mentioned numbers.
|
Glad I held onto these weird parts. I found a 94148 in my collection, but that’s
one of many. I wasn’t aware that 93788 also existed. One more variant to look
for! 😓
|
|
|
| | | | | | | | | |
| | | | | | | Author: | WoutR | | Posted: | Apr 24, 2023 10:43 | | Subject: | Re: Wanted – 2011 Ninjago spinner parts | | Viewed: | 37 times | | Topic: | Wanted | |
|
| In Wanted, here4bricks614 writes:
| | Glad I held onto these weird parts. I found a 94148 in my collection, but that’s
one of many. I wasn’t aware that 93788 also existed. One more variant to look
for! 😓
|
I just came out of my dark ages then, I was not such a crazy collector back then.
There are also a lot of alternate part numbers in the collectible minifigures.
I have not started listing those yet.
|
|
| | | | | | | | | |
| | | | | | | Author: | WoutR | | Posted: | Apr 24, 2023 10:47 | | Subject: | Re: Wanted – 2011 Ninjago spinner parts | | Viewed: | 36 times | | Topic: | Wanted | |
|
| In Wanted, here4bricks614 writes:
| | Glad I held onto these weird parts. I found a 94148 in my collection, but that’s
one of many. I wasn’t aware that 93788 also existed. One more variant to look
for! 😓
|
Do you know if 93790 and 93793 can be identified?
|
|
| | | | | | | | | | | | | |
| | | | | | | | | Author: | here4bricks614 | | Posted: | Apr 24, 2023 13:39 | | Subject: | Re: Wanted – 2011 Ninjago spinner parts | | Viewed: | 40 times | | Topic: | Wanted | |
|
| In Wanted, WoutR writes:
| | In Wanted, here4bricks614 writes:
| | Glad I held onto these weird parts. I found a 94148 in my collection, but that’s
one of many. I wasn’t aware that 93788 also existed. One more variant to look
for! 😓
|
Do you know if 93790 and 93793 can be identified?
|
I have a few of the gold rods and they’re all from Ninjago sets. I’m going to
be selling the remainder of my collection this summer, but I will let you know
as soon as I can get to those rods. I forget, but do the generic rods have part
numbers on them?
|
|
| | | | | | | | | | | | | | | | | |
| | | | | | | | | | | Author: | WoutR | | Posted: | Apr 24, 2023 16:13 | | Subject: | Re: Wanted – 2011 Ninjago spinner parts | | Viewed: | 37 times | | Topic: | Wanted | |
|
| In Wanted, here4bricks614 writes:
| | I forget, but do the generic rods have part numbers on them?
|
Maybe depending on their date of production.
This is a photo of some lightsabers 30374/21462.
I do not know when LEGO started making such small part numbers.
|
|
|
| | | | | |
| | | | | Author: | here4bricks614 | | Posted: | Apr 24, 2023 14:17 | | Subject: | Re: Wanted – 2011 Ninjago spinner parts | | Viewed: | 28 times | | Topic: | Wanted | |
|
| In Wanted, WoutR writes:
| | Wanted – 2011 Ninjago spinner parts
The 2011 Ninjago spinner sets used some common parts with alternative part numbers.
I am looking for those parts (in any colour) with those alternative part numbers
moulded into them.
Buying new sets would help me find these parts, but that gets expensive quickly.
I would buy used sets with these parts, but over time most of these parts have
been replaced by their regular versions (probably except the boat stud under
the turntable).
I am looking for:
with part number 94148
with part number 93788, according to the catalog notes this will be
the “solid plastic” version instead of the “more rubbery” version.
with part number 93791
with part number 93792
with part number 93790
with part number 93793
I do not yet know if parts 63965 and 4085d already had design numbers moulded
into them, or if the parts were to small for that at that time.
Part numbers 93787, 93789 and 93794 also fit within this range or part numbers,
but these do have their own catalog entry so they are easier to find
These parts were used in the following sets:
I am looking for sellers who either have the parts with the listed part numbers,
or who can confirm their used sets still contain the mentioned numbers.
|
94148 does not have ejector pin marks. This mold was current around the time
these became present on plates, in fact, it might have actually been 2011. It
could have been 2010, but I did not pay great attention to molding differences
back then.
|
|
|
| | | | | |
| | | | | Author: | Sadler_Bricks | | Posted: | May 1, 2023 23:01 | | Subject: | Re: Wanted – 2011 Ninjago spinner parts | | Viewed: | 27 times | | Topic: | Wanted | |
|
| Some unique parts indeed I would create a wanted list
Sadler_Bricks
|
|
| | | | | | | | | |
| | | | | | | Author: | WoutR | | Posted: | May 2, 2023 05:41 | | Subject: | Re: Wanted – 2011 Ninjago spinner parts | | Viewed: | 25 times | | Topic: | Wanted | |
|
| In Wanted, Sadler_Bricks writes:
| | Some unique parts indeed I would create a wanted list
Sadler_Bricks
|
Problem is, that these parts are not unique. For example, I cannot use a wanted
list to find 93792 instead of 3004.
[p=93792]
|
|
|
|
|
Netherlands, Zuid-Holland
USA, New Jersey
