Discussion Forum: Thread 268073 |
|
|
| | Author: | bengreen28 | Posted: | May 15, 2020 16:56 | Subject: | Part marked for deletion | Viewed: | 94 times | Topic: | Catalog | Status: | Open | |
|
| Hi, I have a 1x2 plate that has a sticker on it, I have gone to list it and have
found that it is marked for deletion because the sticker was applied to the wrong
part.
I have got this model at home and also have the instructions for it. the sticker
has been applied to the correct part as it shows it clearly on the instructions.
Who do we contact in order to get the deletion cancelled?
Part number is 3023pb01, you can see clearly in the picture that the sticker
is applied to the 1x2 plate and not the mudguard.
|
|
|
| | | | | |
| | | | Author: | BricksThatStick | Posted: | May 15, 2020 18:05 | Subject: | Re: Part marked for deletion | Viewed: | 54 times | Topic: | Catalog | |
|
| In Catalog Requests, bengreen28 writes:
| Hi, I have a 1x2 plate that has a sticker on it, I have gone to list it and have
found that it is marked for deletion because the sticker was applied to the wrong
part.
I have got this model at home and also have the instructions for it. the sticker
has been applied to the correct part as it shows it clearly on the instructions.
Who do we contact in order to get the deletion cancelled?
Part number is 3023pb01, you can see clearly in the picture that the sticker
is applied to the 1x2 plate and not the mudguard.
|
Here is the thread from when it was removed from the inventory:
https://www.bricklink.com/messageThread.asp?ID=253659
The sticker now forms this assembly:
* | | BA081pb01 Stickered Assembly 4 x 2 x 1 with 'Shell' Small Pattern on Both Sides (Stickers) - Set 6634 - 2 Plate 1 x 2, 1 Mudguard 2 x 4 with Arch Studded Parts: Stickered Assembly |
So the sticker is in the correct place but it covers more than 1 part (admittedly
only just)
|
|
|
| | | | | | | | | |
| | | | | | Author: | LordSkylark | Posted: | May 16, 2020 05:41 | Subject: | Re: Part marked for deletion | Viewed: | 36 times | Topic: | Catalog | |
|
| In Catalog, BricksThatStick writes:
| In Catalog Requests, bengreen28 writes:
| Hi, I have a 1x2 plate that has a sticker on it, I have gone to list it and have
found that it is marked for deletion because the sticker was applied to the wrong
part.
I have got this model at home and also have the instructions for it. the sticker
has been applied to the correct part as it shows it clearly on the instructions.
Who do we contact in order to get the deletion cancelled?
Part number is 3023pb01, you can see clearly in the picture that the sticker
is applied to the 1x2 plate and not the mudguard.
|
Here is the thread from when it was removed from the inventory:
https://www.bricklink.com/messageThread.asp?ID=253659
The sticker now forms this assembly:
* | | BA081pb01 Stickered Assembly 4 x 2 x 1 with 'Shell' Small Pattern on Both Sides (Stickers) - Set 6634 - 2 Plate 1 x 2, 1 Mudguard 2 x 4 with Arch Studded Parts: Stickered Assembly |
So the sticker is in the correct place but it covers more than 1 part (admittedly
only just)
|
The only problem is, because that is just barely over, a majority of people will
have the 1x2 plate with with the sticker in a lot rather than the entire assembly...
|
|
|
| | | | | | | | | | | | | |
| | | | | | | | Author: | BricksThatStick | Posted: | May 16, 2020 08:09 | Subject: | Re: Part marked for deletion | Viewed: | 38 times | Topic: | Catalog | |
|
| In Catalog, LordSkylark writes:
| In Catalog, BricksThatStick writes:
| In Catalog Requests, bengreen28 writes:
| Hi, I have a 1x2 plate that has a sticker on it, I have gone to list it and have
found that it is marked for deletion because the sticker was applied to the wrong
part.
I have got this model at home and also have the instructions for it. the sticker
has been applied to the correct part as it shows it clearly on the instructions.
Who do we contact in order to get the deletion cancelled?
Part number is 3023pb01, you can see clearly in the picture that the sticker
is applied to the 1x2 plate and not the mudguard.
|
Here is the thread from when it was removed from the inventory:
https://www.bricklink.com/messageThread.asp?ID=253659
The sticker now forms this assembly:
* | | BA081pb01 Stickered Assembly 4 x 2 x 1 with 'Shell' Small Pattern on Both Sides (Stickers) - Set 6634 - 2 Plate 1 x 2, 1 Mudguard 2 x 4 with Arch Studded Parts: Stickered Assembly |
So the sticker is in the correct place but it covers more than 1 part (admittedly
only just)
|
The only problem is, because that is just barely over, a majority of people will
have the 1x2 plate with with the sticker in a lot rather than the entire assembly...
|
True but that leaves the sticker open to being damaged or getting gunk stuck
to it.
There's no reason why you can't sell it as an individual part but it
doesn't need it's own catalog entry as we are now happily accepting sticker
over assembly entries.
|
|
|
| | | | | | | | | | | | | | | | | |
| | | | | | | | | | Author: | bengreen28 | Posted: | May 16, 2020 12:06 | Subject: | Re: Part marked for deletion | Viewed: | 28 times | Topic: | Catalog | |
|
| In Catalog, BricksThatStick writes:
| In Catalog, LordSkylark writes:
| In Catalog, BricksThatStick writes:
| In Catalog Requests, bengreen28 writes:
| Hi, I have a 1x2 plate that has a sticker on it, I have gone to list it and have
found that it is marked for deletion because the sticker was applied to the wrong
part.
I have got this model at home and also have the instructions for it. the sticker
has been applied to the correct part as it shows it clearly on the instructions.
Who do we contact in order to get the deletion cancelled?
Part number is 3023pb01, you can see clearly in the picture that the sticker
is applied to the 1x2 plate and not the mudguard.
|
Here is the thread from when it was removed from the inventory:
https://www.bricklink.com/messageThread.asp?ID=253659
The sticker now forms this assembly:
* | | BA081pb01 Stickered Assembly 4 x 2 x 1 with 'Shell' Small Pattern on Both Sides (Stickers) - Set 6634 - 2 Plate 1 x 2, 1 Mudguard 2 x 4 with Arch Studded Parts: Stickered Assembly |
So the sticker is in the correct place but it covers more than 1 part (admittedly
only just)
|
The only problem is, because that is just barely over, a majority of people will
have the 1x2 plate with with the sticker in a lot rather than the entire assembly...
|
True but that leaves the sticker open to being damaged or getting gunk stuck
to it.
There's no reason why you can't sell it as an individual part but it
doesn't need it's own catalog entry as we are now happily accepting sticker
over assembly entries.
|
That's the problem though, there is a catalog entry for the part, I'm
unable to list it as it's marked for deletion. I only have one of the plates
and I also don't have the other parts to be able to list it in the sticker
over assembly entry.
So I end up with a part I can't list or I remove the sticker and list the
plate whilst binning the sticker.
This is not one from my set as that is complete and still has all the original
parts from when I bought it new.
|
|
|
| | | | | | | | | | | | | | | | | | | | | |
| | | | | | | | | | | | Author: | Proprietor | Posted: | May 16, 2020 14:23 | Subject: | Re: Part marked for deletion | Viewed: | 28 times | Topic: | Catalog | |
|
| List it in under the Sticker over Assembly number and indicate in your comments
that it’s the plate only and price it accordingly.
In Catalog, bengreen28 writes:
| In Catalog, BricksThatStick writes:
| In Catalog, LordSkylark writes:
| In Catalog, BricksThatStick writes:
| In Catalog Requests, bengreen28 writes:
| Hi, I have a 1x2 plate that has a sticker on it, I have gone to list it and have
found that it is marked for deletion because the sticker was applied to the wrong
part.
I have got this model at home and also have the instructions for it. the sticker
has been applied to the correct part as it shows it clearly on the instructions.
Who do we contact in order to get the deletion cancelled?
Part number is 3023pb01, you can see clearly in the picture that the sticker
is applied to the 1x2 plate and not the mudguard.
|
Here is the thread from when it was removed from the inventory:
https://www.bricklink.com/messageThread.asp?ID=253659
The sticker now forms this assembly:
* | | BA081pb01 Stickered Assembly 4 x 2 x 1 with 'Shell' Small Pattern on Both Sides (Stickers) - Set 6634 - 2 Plate 1 x 2, 1 Mudguard 2 x 4 with Arch Studded Parts: Stickered Assembly |
So the sticker is in the correct place but it covers more than 1 part (admittedly
only just)
|
The only problem is, because that is just barely over, a majority of people will
have the 1x2 plate with with the sticker in a lot rather than the entire assembly...
|
True but that leaves the sticker open to being damaged or getting gunk stuck
to it.
There's no reason why you can't sell it as an individual part but it
doesn't need it's own catalog entry as we are now happily accepting sticker
over assembly entries.
|
That's the problem though, there is a catalog entry for the part, I'm
unable to list it as it's marked for deletion. I only have one of the plates
and I also don't have the other parts to be able to list it in the sticker
over assembly entry.
So I end up with a part I can't list or I remove the sticker and list the
plate whilst binning the sticker.
This is not one from my set as that is complete and still has all the original
parts from when I bought it new.
|
|
|
|
| | | | | | | | | | | | | | | | | | | | | | | | | |
| | | | | | | | | | | | | | Author: | bengreen28 | Posted: | May 16, 2020 14:38 | Subject: | Re: Part marked for deletion | Viewed: | 44 times | Topic: | Catalog | |
|
| In Catalog, Proprietor writes:
| List it in under the Sticker over Assembly number and indicate in your comments
that it’s the plate only and price it accordingly.
In Catalog, bengreen28 writes:
| In Catalog, BricksThatStick writes:
| In Catalog, LordSkylark writes:
| In Catalog, BricksThatStick writes:
| In Catalog Requests, bengreen28 writes:
| Hi, I have a 1x2 plate that has a sticker on it, I have gone to list it and have
found that it is marked for deletion because the sticker was applied to the wrong
part.
I have got this model at home and also have the instructions for it. the sticker
has been applied to the correct part as it shows it clearly on the instructions.
Who do we contact in order to get the deletion cancelled?
Part number is 3023pb01, you can see clearly in the picture that the sticker
is applied to the 1x2 plate and not the mudguard.
|
Here is the thread from when it was removed from the inventory:
https://www.bricklink.com/messageThread.asp?ID=253659
The sticker now forms this assembly:
* | | BA081pb01 Stickered Assembly 4 x 2 x 1 with 'Shell' Small Pattern on Both Sides (Stickers) - Set 6634 - 2 Plate 1 x 2, 1 Mudguard 2 x 4 with Arch Studded Parts: Stickered Assembly |
So the sticker is in the correct place but it covers more than 1 part (admittedly
only just)
|
The only problem is, because that is just barely over, a majority of people will
have the 1x2 plate with with the sticker in a lot rather than the entire assembly...
|
True but that leaves the sticker open to being damaged or getting gunk stuck
to it.
There's no reason why you can't sell it as an individual part but it
doesn't need it's own catalog entry as we are now happily accepting sticker
over assembly entries.
|
That's the problem though, there is a catalog entry for the part, I'm
unable to list it as it's marked for deletion. I only have one of the plates
and I also don't have the other parts to be able to list it in the sticker
over assembly entry.
So I end up with a part I can't list or I remove the sticker and list the
plate whilst binning the sticker.
This is not one from my set as that is complete and still has all the original
parts from when I bought it new.
|
|
Cool thanks I'll do that.
|
|
|
|
|
|
|