|
 |
| | | Author: | Miro78  | | Posted: | Sep 2, 2014 02:37 | | Subject: | Inventory Change Request for Set 41056-1 | | Viewed: | 48 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 553c White Brick, Round 2 x 2 Dome Top - Hollow Stud with Bottom Axle Holder x Shape + Orientation (Alternate) (match ID 1)
* Change 1 Part White 553b Brick, Round 2 x 2 Dome Top - Blocked Open Stud with Bottom Axle Holder x Shape + Orientation {match ID 0 to 1}
* Change {1 to 2} Part Trans-Yellow 4073 Plate, Round 1 x 1 Straight Side (Extra)
Comments from Submitter:
My set contained the recessed stud and not blocked stud variant of the 2x2 dome, and an extra 1x1 yellow round plate.
I submitted new fig entry frnd066a, because the current inventory shows Andrew without headphones, and the minifig should come with the headphones, per BL minifig rules. Once it is approved, the figs need to be switched and headphones need to be removed from regular parts list.
|
|
|
| | | | | |
| | | | | Author: | jennnifer | | Posted: | Sep 3, 2014 06:40 | | Subject: | Re: Inventory Change Request for Set 41056-1 | | Viewed: | 38 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, Miro78 writes:
| | Please make changes to the following inventory:
* Add 1 Part 553c White Brick, Round 2 x 2 Dome Top - Hollow Stud with Bottom Axle Holder x Shape + Orientation (Alternate) (match ID 1)
* Change 1 Part White 553b Brick, Round 2 x 2 Dome Top - Blocked Open Stud with Bottom Axle Holder x Shape + Orientation {match ID 0 to 1}
* Change {1 to 2} Part Trans-Yellow 4073 Plate, Round 1 x 1 Straight Side (Extra)
Comments from Submitter:
My set contained the recessed stud and not blocked stud variant of the 2x2 dome, and an extra 1x1 yellow round plate.
I submitted new fig entry frnd066a, because the current inventory shows Andrew without headphones, and the minifig should come with the headphones, per BL minifig rules. Once it is approved, the figs need to be switched and headphones need to be removed from regular parts list.
|
Thank you! I will make the changes as soon as the corrected figure is approved.
Could you please also confirm if this figure's Legs, Assembly 92253c00pb01
has Tan or Dark Tan shoes? There has been some question about their exact color.
Jen
|
|
|
| | | | | | | | | |
| | | | | | | Author: | Miro78 | | Posted: | Sep 3, 2014 08:31 | | Subject: | Re: Inventory Change Request for Set 41056-1 | | Viewed: | 29 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, jennnifer writes:
| | In Inventories Requests, Miro78 writes:
| | Please make changes to the following inventory:
* Add 1 Part 553c White Brick, Round 2 x 2 Dome Top - Hollow Stud with Bottom Axle Holder x Shape + Orientation (Alternate) (match ID 1)
* Change 1 Part White 553b Brick, Round 2 x 2 Dome Top - Blocked Open Stud with Bottom Axle Holder x Shape + Orientation {match ID 0 to 1}
* Change {1 to 2} Part Trans-Yellow 4073 Plate, Round 1 x 1 Straight Side (Extra)
Comments from Submitter:
My set contained the recessed stud and not blocked stud variant of the 2x2 dome, and an extra 1x1 yellow round plate.
I submitted new fig entry frnd066a, because the current inventory shows Andrew without headphones, and the minifig should come with the headphones, per BL minifig rules. Once it is approved, the figs need to be switched and headphones need to be removed from regular parts list.
|
Thank you! I will make the changes as soon as the corrected figure is approved.
Could you please also confirm if this figure's Legs, Assembly 92253c00pb01
has Tan or Dark Tan shoes? There has been some question about their exact color.
Jen
|
Thanks Jen,
The shoes for Andrew fig from this set are in fact tan and not dark tan. See
photo below. The fig legs are standing on tan (left) and dark tan (right) tiles.
Miro
|
|
|
|
| | | | | | | | | |
| | | | | | | Author: | Miro78 | | Posted: | Sep 3, 2014 09:02 | | Subject: | Re: Inventory Change Request for Set 41056-1 | | Viewed: | 60 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, jennnifer writes:
| | In Inventories Requests, Miro78 writes:
| | Please make changes to the following inventory:
* Add 1 Part 553c White Brick, Round 2 x 2 Dome Top - Hollow Stud with Bottom Axle Holder x Shape + Orientation (Alternate) (match ID 1)
* Change 1 Part White 553b Brick, Round 2 x 2 Dome Top - Blocked Open Stud with Bottom Axle Holder x Shape + Orientation {match ID 0 to 1}
* Change {1 to 2} Part Trans-Yellow 4073 Plate, Round 1 x 1 Straight Side (Extra)
Comments from Submitter:
My set contained the recessed stud and not blocked stud variant of the 2x2 dome, and an extra 1x1 yellow round plate.
I submitted new fig entry frnd066a, because the current inventory shows Andrew without headphones, and the minifig should come with the headphones, per BL minifig rules. Once it is approved, the figs need to be switched and headphones need to be removed from regular parts list.
|
Thank you! I will make the changes as soon as the corrected figure is approved.
Could you please also confirm if this figure's Legs, Assembly 92253c00pb01
has Tan or Dark Tan shoes? There has been some question about their exact color.
Jen
|
Jen,
To make things even more complicated, I looked at the other legs that the part
is assigned to and from the pictures it looked like the shoes
on fig look different (pictured on the right), compared to tan shoes
from fig (pictured on the left).
So I compared them and sure enough they are. The shoes on frnd066 are tan, but
on frnd043 don't match any color that I am aware of. See photo below.
I placed some known colors in front: from left to right the colors are Tan, Dark
Tan, Sand Green, Olive Green, Yellowish Green, and Lime. The shoes on frnd043
don't match any of them. Perhaps some of the color chart experts like Ryan
can chime in. He might be interested in those shoes. 
Here are the rest of the figs with those legs, all but frnd043 look to have tan
shoes.
http://www.bricklink.com/catalogItemIn.asp?P=92253c00pb01&in=M
Miro
|
|
|
|
| | | | | | | | | | | | | |
| | | | | | | | | Author: | paulvdb | | Posted: | Sep 3, 2014 09:41 | | Subject: | Re: Inventory Change Request for Set 41056-1 | | Viewed: | 35 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, Miro78 writes:
| | In Inventories Requests, jennnifer writes:
| | In Inventories Requests, Miro78 writes:
| | Please make changes to the following inventory:
* Add 1 Part 553c White Brick, Round 2 x 2 Dome Top - Hollow Stud with Bottom Axle Holder x Shape + Orientation (Alternate) (match ID 1)
* Change 1 Part White 553b Brick, Round 2 x 2 Dome Top - Blocked Open Stud with Bottom Axle Holder x Shape + Orientation {match ID 0 to 1}
* Change {1 to 2} Part Trans-Yellow 4073 Plate, Round 1 x 1 Straight Side (Extra)
Comments from Submitter:
My set contained the recessed stud and not blocked stud variant of the 2x2 dome, and an extra 1x1 yellow round plate.
I submitted new fig entry frnd066a, because the current inventory shows Andrew without headphones, and the minifig should come with the headphones, per BL minifig rules. Once it is approved, the figs need to be switched and headphones need to be removed from regular parts list.
|
Thank you! I will make the changes as soon as the corrected figure is approved.
Could you please also confirm if this figure's Legs, Assembly 92253c00pb01
has Tan or Dark Tan shoes? There has been some question about their exact color.
Jen
|
Jen,
To make things even more complicated, I looked at the other legs that the part
is assigned to and from the pictures it looked like the shoes
on fig look different (pictured on the right), compared to tan shoes
from fig (pictured on the left).
So I compared them and sure enough they are. The shoes on frnd066 are tan, but
on frnd043 don't match any color that I am aware of. See photo below.
I placed some known colors in front: from left to right the colors are Tan, Dark
Tan, Sand Green, Olive Green, Yellowish Green, and Lime. The shoes on frnd043
don't match any of them. Perhaps some of the color chart experts like Ryan
can chime in. He might be interested in those shoes.
Here are the rest of the figs with those legs, all but frnd043 look to have tan
shoes.
http://www.bricklink.com/catalogItemIn.asp?P=92253c00pb01&in=M
Miro
|
I just checked my store inventory of Friends minifigs. I have frnd019 and frnd043
with these legs. The frnd019 all came with legs in sealed plastic bags and they
all appear to have dark blue as the base color of the part with tan shoes printed
on them. Check the bottom of the shoes and they are all dark blue. They also
have the number 92253 printed on the bottom of the shoes. My frnd043 minifigs
came with a mix of those same legs in sealed plastic bags and newer legs that
did not come in sealed plastic bags. Those legs have solid tan shoes (bottom
of the shoes is also tan) and have a different number printed on the bottom of
the shoes. It looks like 16406 but I often have trouble reading these small numbers
so I could be wrong about the number, but it's certainly not 92253.
|
|
|
| | | | | | | | | | | | | | | | | |
| | | | | | | | | | | Author: | paulvdb | | Posted: | Sep 3, 2014 09:44 | | Subject: | Re: Inventory Change Request for Set 41056-1 | | Viewed: | 33 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, paulvdb writes:
| | I just checked my store inventory of Friends minifigs. I have frnd019 and frnd043
with these legs. The frnd019 all came with legs in sealed plastic bags and they
all appear to have dark blue as the base color of the part with tan shoes printed
on them. Check the bottom of the shoes and they are all dark blue. They also
have the number 92253 printed on the bottom of the shoes. My frnd043 minifigs
came with a mix of those same legs in sealed plastic bags and newer legs that
did not come in sealed plastic bags. Those legs have solid tan shoes (bottom
of the shoes is also tan) and have a different number printed on the bottom of
the shoes. It looks like 16406 but I often have trouble reading these small numbers
so I could be wrong about the number, but it's certainly not 92253.
|
In addition to my previous post, the legs with 92253 printed on the bottom also
have (C)2009 LEGO while the new 16406 legs have (C)2013 LEGO printed on the bottom.
|
|
|
| | | | | | | | | | | | | | | | | |
| | | | | | | | | | | Author: | jennnifer | | Posted: | Sep 3, 2014 12:31 | | Subject: | Re: Inventory Change Request for Set 41056-1 | | Viewed: | 34 times | | Topic: | Inventories Requests | |
|
| Interesting! Thank you for that information. There were two different numbers
for this mold that were just merged. It appears now perhaps that the 92253 varieties
are printed, and the 16406 are two separate shades of plastic combined? Some
of the new Chima figure's Headgear is also this way. For example:
The beak is not printed, it is solid Yellow plastic. I will check in with the
Catalog Admins to see if they think a different entry is appropriate for the
Legs, Assembly in question.
Thanks again!
Jen
| |
I just checked my store inventory of Friends minifigs. I have frnd019 and frnd043
with these legs. The frnd019 all came with legs in sealed plastic bags and they
all appear to have dark blue as the base color of the part with tan shoes printed
on them. Check the bottom of the shoes and they are all dark blue. They also
have the number 92253 printed on the bottom of the shoes. My frnd043 minifigs
came with a mix of those same legs in sealed plastic bags and newer legs that
did not come in sealed plastic bags. Those legs have solid tan shoes (bottom
of the shoes is also tan) and have a different number printed on the bottom of
the shoes. It looks like 16406 but I often have trouble reading these small numbers
so I could be wrong about the number, but it's certainly not 92253.
|
|
|
|
| | | | | | | | | | | | | | | | | |
| | | | | | | | | | | Author: | Miro78 | | Posted: | Sep 3, 2014 21:30 | | Subject: | Re: Inventory Change Request for Set 41056-1 | | Viewed: | 110 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, paulvdb writes:
| | In Inventories Requests, Miro78 writes:
| | In Inventories Requests, jennnifer writes:
| | In Inventories Requests, Miro78 writes:
| | Please make changes to the following inventory:
* Add 1 Part 553c White Brick, Round 2 x 2 Dome Top - Hollow Stud with Bottom Axle Holder x Shape + Orientation (Alternate) (match ID 1)
* Change 1 Part White 553b Brick, Round 2 x 2 Dome Top - Blocked Open Stud with Bottom Axle Holder x Shape + Orientation {match ID 0 to 1}
* Change {1 to 2} Part Trans-Yellow 4073 Plate, Round 1 x 1 Straight Side (Extra)
Comments from Submitter:
My set contained the recessed stud and not blocked stud variant of the 2x2 dome, and an extra 1x1 yellow round plate.
I submitted new fig entry frnd066a, because the current inventory shows Andrew without headphones, and the minifig should come with the headphones, per BL minifig rules. Once it is approved, the figs need to be switched and headphones need to be removed from regular parts list.
|
Thank you! I will make the changes as soon as the corrected figure is approved.
Could you please also confirm if this figure's Legs, Assembly 92253c00pb01
has Tan or Dark Tan shoes? There has been some question about their exact color.
Jen
|
Jen,
To make things even more complicated, I looked at the other legs that the part
is assigned to and from the pictures it looked like the shoes
on fig look different (pictured on the right), compared to tan shoes
from fig (pictured on the left).
So I compared them and sure enough they are. The shoes on frnd066 are tan, but
on frnd043 don't match any color that I am aware of. See photo below.
I placed some known colors in front: from left to right the colors are Tan, Dark
Tan, Sand Green, Olive Green, Yellowish Green, and Lime. The shoes on frnd043
don't match any of them. Perhaps some of the color chart experts like Ryan
can chime in. He might be interested in those shoes.
Here are the rest of the figs with those legs, all but frnd043 look to have tan
shoes.
http://www.bricklink.com/catalogItemIn.asp?P=92253c00pb01&in=M
Miro
|
I just checked my store inventory of Friends minifigs. I have frnd019 and frnd043
with these legs. The frnd019 all came with legs in sealed plastic bags and they
all appear to have dark blue as the base color of the part with tan shoes printed
on them. Check the bottom of the shoes and they are all dark blue. They also
have the number 92253 printed on the bottom of the shoes. My frnd043 minifigs
came with a mix of those same legs in sealed plastic bags and newer legs that
did not come in sealed plastic bags. Those legs have solid tan shoes (bottom
of the shoes is also tan) and have a different number printed on the bottom of
the shoes. It looks like 16406 but I often have trouble reading these small numbers
so I could be wrong about the number, but it's certainly not 92253.
|
I just checked on mine from figs frnd043 (left in photo) and frnd066 (right in
photo) and the left one has dark blue base with tan printed and the right one
is dark blue legs with tan plastic shoes (not printed). The IDs on them are like
you say, 92253 on the left one and something like 16408 on the right one. The
number on the latter is hard to read without a magnifying glass, which I do not
have handy.
In the second photo, you can see how the paint didn't get applied well on
the outside of the shoes between the legs portion.
So a new entry is warranted for the legs with blue bottom of the shoes.
Miro
|
|
|
|
| | | | | | | | | | | | | | | | | | | | | |
| | | | | | | | | | | | | Author: | Miro78 | | Posted: | Sep 3, 2014 21:32 | | Subject: | Re: Inventory Change Request for Set 41056-1 | | Viewed: | 25 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, Miro78 writes:
| |
I just checked on mine from figs frnd043 (left in photo) and frnd066 (right in
photo) and the left one has dark blue base with tan printed and the right one
is dark blue legs with tan plastic shoes (not printed). The IDs on them are like
you say, 92253 on the left one and something like 16408 on the right one. The
number on the latter is hard to read without a magnifying glass, which I do not
have handy.
In the second photo, you can see how the paint didn't get applied well on
the outside of the shoes between the legs portion.
So a new entry is warranted for the legs with blue bottom of the shoes.
Miro
|
Order of photos in this post is flipped, so first photo is really second and
vice versa.
Miro
|
|
|
|
|
|
USA, California
Netherlands, Overijssel
)
)