|
 |
| | | Author: | jbricks  | | Posted: | Sep 26, 2023 05:51 | | Subject: | Plant Grass Stem (15279) DESIGN CHANGE | | Viewed: | 180 times | | Topic: | Catalog | | Status: | Open | |
|
| Hello,
Has anyone notice a designchange in part 15279.
See attached pictures.
The hole is now perfectly round on 1 side of the part.
Type of plastic also looks changed.
Anybody got any insight?
Doe this require a new catalog entry?
|
|
|
| | | | | |
| | | | | Author: | ghyde | | Posted: | Sep 26, 2023 06:04 | | Subject: | Re: Plant Grass Stem (15279) DESIGN CHANGE | | Viewed: | 48 times | | Topic: | Catalog | |
|
| In Catalog, jbricks writes:
| | Hello,
Has anyone notice a designchange in part 15279.
See attached pictures.
The hole is now perfectly round on 1 side of the part.
Type of plastic also looks changed.
Anybody got any insight?
Doe this require a new catalog entry?
|
It might be worth a catalog note stating this in the item's description.
Can a Technic pin be inserted into the large hole on both types of parts? If
the older style did not allow this but the new style does allow this, then that
would be a valid reason to add a note for this item in it's catalog entry.
Cheers ...
ghyde
|
|
| | | | | | | | | |
| | | | | | | Author: | SylvainLS | | Posted: | Sep 26, 2023 06:08 | | Subject: | Re: Plant Grass Stem (15279) DESIGN CHANGE | | Viewed: | 60 times | | Topic: | Catalog | |
|
| In Catalog, ghyde writes:
In Catalog, jbricks writes:
| | | | Hello,
Has anyone notice a designchange in part
|
|
Er, which is which?
| | | | The hole is now perfectly round on 1 side of the part.
Type of plastic also looks changed.
Anybody got any insight?
Doe this require a new catalog entry?
|
It might be worth a catalog note stating this in the item's description.
Can a Technic pin be inserted into the large hole on both types of parts?
|
It’s a 3.2mm hole (for 3.18mm bars) 
| | If
the older style did not allow this but the new style does allow this, then that
would be a valid reason to add a note for this item in it's catalog entry.
Cheers ...
ghyde
|
|
|
|
| | | | | | | | | | | | | |
| | | | | | | | | Author: | ghyde | | Posted: | Sep 26, 2023 06:15 | | Subject: | Re: Plant Grass Stem (15279) DESIGN CHANGE | | Viewed: | 52 times | | Topic: | Catalog | |
|
| In Catalog, SylvainLS writes:
| | In Catalog, ghyde writes:
In Catalog, jbricks writes:
| | | | Hello,
Has anyone notice a designchange in part
|
|
Er, which is which?
|
Looking at the first image, the older part might be the one on the right. I reckon
the OP should clarify which is which. 
Note to SylvainLS: Please trim unnecessary quoting when replying. I almost completely
missed your reply in all the quoted text. Many thanks for reading and responding.
[...]
Cheers ...
ghyde
|
|
| | | | | | | | | | | | | | | | | |
| | | | | | | | | | | Author: | jennnifer | | Posted: | Sep 26, 2023 09:37 | | Subject: | Re: Plant Grass Stem (15279) DESIGN CHANGE | | Viewed: | 57 times | | Topic: | Catalog | |
|
| In Catalog, ghyde writes:
| |
Note to SylvainLS: Please trim unnecessary quoting when replying. I almost completely
missed your reply in all the quoted text. Many thanks for reading and responding.
|
You're kidding right? You spend a lot of time on this Forum answering questions
in an authoritative way with varyingly accurate answers. And now you are correcting
the Forum etiquette of our Forum Moderator? Wow. You know, there's room here
for lots of kinds of people and helpful responses are always desired, but you
really go too far.
~Jen
|
|
| | | | | | | | | | | | | | | | | | | | | |
| | | | | | | | | | | | | Author: | SylvainLS | | Posted: | Sep 26, 2023 10:32 | | Subject: | Re: Plant Grass Stem (15279) DESIGN CHANGE | | Viewed: | 44 times | | Topic: | Catalog | |
|
| In Catalog, jennnifer writes:
| | […]
And now you are correcting
the Forum etiquette of our Forum Moderator? Wow.
|
Thanks Jen, but there’s no offense taken on my part: written words can sometimes
read harsher than they would sound, we (I certainly  ) can be corrected and
I could have snipped a bit more.
(Also, did you see you posted at 09:37? The (EDT) LEGO hour! )
|
|
| | | | | | | | | | | | | | | | | | | | | | | | | |
| | | | | | | | | | | | | | | Author: | jennnifer | | Posted: | Sep 26, 2023 10:49 | | Subject: | Re: Plant Grass Stem (15279) DESIGN CHANGE | | Viewed: | 46 times | | Topic: | Catalog | |
|
| In Catalog, SylvainLS writes:
| | In Catalog, jennnifer writes:
| | […]
And now you are correcting
the Forum etiquette of our Forum Moderator? Wow.
|
Thanks Jen, but there’s no offense taken on my part: written words can sometimes
read harsher than they would sound, we (I certainly ) can be corrected and
I could have snipped a bit more.
(Also, did you see you posted at 09:37? The (EDT) LEGO hour! )
|
Ah, okay! Thanks for the gentle reminder. I seem to be taking a lot of things
the wrong way this morning.
My apologies to ghyde if I came across as way too harsh!
I am going to add 09:37 to my list of great times during the day with 12:34,
and 10:32 which is my house number.
~Jen
|
|
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
| | | | | | | | | | | | | | | | | Author: | SylvainLS | | Posted: | Sep 26, 2023 11:33 | | Subject: | Re: Plant Grass Stem (15279) DESIGN CHANGE | | Viewed: | 39 times | | Topic: | Catalog | |
|
| In Catalog, jennnifer writes:
| | […]
I am going to add 09:37 to my list of great times during the day with 12:34,
and 10:32 which is my house number.
|
Old French wannabe comedians like me have another one: 12:06 (midi six
/ meeDEEseeth, “noon 6”), and we call it “Catherine,” because of Catherine de
Médicis (pronounced meDEEsee(th), de’ Medici in Italian)
|
|
| | | | | | | | | | | | | | | | | | | | | | | | | |
| | | | | | | | | | | | | | | Author: | Nubs_Select | | Posted: | Sep 26, 2023 12:25 | | Subject: | Re: Plant Grass Stem (15279) DESIGN CHANGE | | Viewed: | 41 times | | Topic: | Catalog | |
|
| | | (Also, did you see you posted at 09:37? The (EDT) LEGO hour! )
|
It’s always lego time 🧙♂️
|
|
| | | | | | | | | | | | | | | | | | | | | |
| | | | | | | | | | | | | Author: | 1001bricks | | Posted: | Sep 26, 2023 11:14 | | Subject: | Re: Plant Grass Stem (15279) DESIGN CHANGE | | Viewed: | 42 times | | Topic: | Catalog | |
|
| In Catalog, jennnifer writes:
| | In Catalog, ghyde writes:
| |
Note to SylvainLS: Please trim unnecessary quoting when replying. I almost completely
missed your reply in all the quoted text. Many thanks for reading and responding.
|
You're kidding right? You spend a lot of time on this Forum answering questions
in an authoritative way with varyingly accurate answers. And now you are correcting
the Forum etiquette of our Forum Moderator? Wow. You know, there's room here
for lots of kinds of people and helpful responses are always desired, but you
really go too far.
~Jen
|
Never mess up with Jenn!
|
|
|
| | | | | | | | | | | | | |
| | | | | | | | | Author: | jbricks | | Posted: | Sep 26, 2023 06:16 | | Subject: | Re: Plant Grass Stem (15279) DESIGN CHANGE | | Viewed: | 53 times | | Topic: | Catalog | |
|
| In Catalog, SylvainLS writes:
| | In Catalog, ghyde writes:
In Catalog, jbricks writes:
| | | | Hello,
Has anyone notice a designchange in part
|
|
Er, which is which?
|
The left is the new design, on both pictures.
| |
| | | | The hole is now perfectly round on 1 side of the part.
Type of plastic also looks changed.
Anybody got any insight?
Doe this require a new catalog entry?
|
It might be worth a catalog note stating this in the item's description.
Can a Technic pin be inserted into the large hole on both types of parts?
|
It’s a 3.2mm hole (for 3.18mm bars)
|
They both ''fit'' a bar, the new one (left) they reinforced/perfected
the hole on 1 end,
So it does not only fit, but looks designed to fit it.
| |
| | If
the older style did not allow this but the new style does allow this, then that
would be a valid reason to add a note for this item in it's catalog entry.
Cheers ...
ghyde
|
|
|
|
|
| | | | | | | | | | | | | | | | | |
| | | | | | | | | | | Author: | BricksThatStick | | Posted: | Sep 27, 2023 05:11 | | Subject: | Re: Plant Grass Stem (15279) DESIGN CHANGE | | Viewed: | 48 times | | Topic: | Catalog | |
|
| In Catalog, jbricks writes:
| | In Catalog, SylvainLS writes:
| | In Catalog, ghyde writes:
In Catalog, jbricks writes:
| | | | Hello,
Has anyone notice a designchange in part
|
|
Er, which is which?
|
The left is the new design, on both pictures.
| |
| | | | The hole is now perfectly round on 1 side of the part.
Type of plastic also looks changed.
Anybody got any insight?
Doe this require a new catalog entry?
|
It might be worth a catalog note stating this in the item's description.
Can a Technic pin be inserted into the large hole on both types of parts?
|
It’s a 3.2mm hole (for 3.18mm bars)
|
They both ''fit'' a bar, the new one (left) they reinforced/perfected
the hole on 1 end,
So it does not only fit, but looks designed to fit it.
|
The fact they have made it a proper hole with a flat rim looks to me like there
is a reason for this change.
It may just be the picture but it looks like they have also added ridges inside
for friction / clutch power?
Can you provide a closer/more detailed look at the hole?
Thanks (we've been waiting for this one to show up)
Paul.
|
|
|
| | | | | | | | | | | | | | | | | | | | | |
| | | | | | | | | | | | | Author: | jbricks | | Posted: | Sep 28, 2023 05:26 | | Subject: | Re: Plant Grass Stem (15279) DESIGN CHANGE | | Viewed: | 37 times | | Topic: | Catalog | |
|
| Hello,
Making a macro pictures sadly is not working with my phone, seems that app developers
take more care in stupid fuctions for socials then a simple zoomed in picture.
But yes you are correct there are ridges in the hole for better grip on a bar,
Janet
In Catalog Requests, BricksThatStick writes:
| | In Catalog, jbricks writes:
| | In Catalog, SylvainLS writes:
| | In Catalog, ghyde writes:
In Catalog, jbricks writes:
| | | | Hello,
Has anyone notice a designchange in part
|
|
Er, which is which?
|
The left is the new design, on both pictures.
| |
| | | | The hole is now perfectly round on 1 side of the part.
Type of plastic also looks changed.
Anybody got any insight?
Doe this require a new catalog entry?
|
It might be worth a catalog note stating this in the item's description.
Can a Technic pin be inserted into the large hole on both types of parts?
|
It’s a 3.2mm hole (for 3.18mm bars)
|
They both ''fit'' a bar, the new one (left) they reinforced/perfected
the hole on 1 end,
So it does not only fit, but looks designed to fit it.
|
The fact they have made it a proper hole with a flat rim looks to me like there
is a reason for this change.
It may just be the picture but it looks like they have also added ridges inside
for friction / clutch power?
Can you provide a closer/more detailed look at the hole?
Thanks (we've been waiting for this one to show up)
Paul.
|
|
|
|
| | | | | |
| | | | | Author: | yorbrick | | Posted: | Sep 26, 2023 07:22 | | Subject: | Re: Plant Grass Stem (15279) DESIGN CHANGE | | Viewed: | 52 times | | Topic: | Catalog | |
|
| | | Doe this require a new catalog entry?
|
Hopefully just a note. There is no functional difference. Imagine trying to tell
them apart when they have playwear!
|
|
| | | | | |
| | | | | Author: | iprice | | Posted: | Sep 26, 2023 16:18 | | Subject: | Re: Plant Grass Stem (15279) DESIGN CHANGE | | Viewed: | 48 times | | Topic: | Catalog | |
|
| In Catalog, jbricks writes:
| | Hello,
Has anyone notice a designchange in part 15279.
See attached pictures.
The hole is now perfectly round on 1 side of the part.
Type of plastic also looks changed.
Anybody got any insight?
Doe this require a new catalog entry?
|
I'm now just waiting for the stoners to ask for a baggie of fresh Lego grass
|
|
| | | | | | | | | |
| | | | | | | Author: | macebobo | | Posted: | Sep 26, 2023 16:47 | | Subject: | Re: Plant Grass Stem (15279) DESIGN CHANGE | | Viewed: | 47 times | | Topic: | Catalog | |
|
| In Catalog, iprice writes:
| | I'm now just waiting for the stoners to ask for a baggie of fresh Lego grass
|
Review: Smoke too harsh, could not keep a coal, smelled really bad, and horrible
high.
|
|
| | | | | | | | | | | | | |
| | | | | | | | | Author: | yorbrick | | Posted: | Sep 26, 2023 18:17 | | Subject: | Re: Plant Grass Stem (15279) DESIGN CHANGE | | Viewed: | 58 times | | Topic: | Catalog | |
|
| In Catalog, macebobo writes:
| | In Catalog, iprice writes:
| | I'm now just waiting for the stoners to ask for a baggie of fresh Lego grass
|
Review: Smoke too harsh, could not keep a coal, smelled really bad, and horrible
high.
|
But cheap enough to try it again.
|
|
| | | | | |
| | | | | Author: | randyf | | Posted: | Nov 14, 2023 17:54 | | Subject: | Re: Plant Grass Stem (15279) DESIGN CHANGE | | Viewed: | 47 times | | Topic: | Catalog | |
|
| In Catalog Requests, jbricks writes:
| | Hello,
Has anyone notice a designchange in part 15279.
See attached pictures.
The hole is now perfectly round on 1 side of the part.
Type of plastic also looks changed.
Anybody got any insight?
Doe this require a new catalog entry?
|
The catalog admin team unanimously decided not to add a new version of this part
to the catalog after further discussion. Instead, the alternate item number 2659
was added to 15279.
Cheers,
Randy
|
|
|
|
|
Netherlands, Gelderland
)
)
Australia, Queensland
France, Nouvelle-Aquitaine
USA, Illinois
Canada, Ontario
United Kingdom, England
