* Add 16 Part 3003 Black Brick 2 x 2
* Add 32 Part 3003 Blue Brick 2 x 2
* Add 26 Part 3001 Blue Brick 2 x 4
* Add 4 Part 2456 Blue Brick 2 x 6
* Add 4 Part 3007 Blue Brick 2 x 8
* Add 38 Part 3003 Red Brick 2 x 2
* Add 30 Part 3001 Red Brick 2 x 4
* Add 38 Part 3003 White Brick 2 x 2
* Add 30 Part 3001 White Brick 2 x 4
* Add 32 Part 3003 Yellow Brick 2 x 2
* Add 26 Part 3001 Yellow Brick 2 x 4
* Add 8 Part 30077 Yellow Fence 1 x 6 x 2
Comments from Submitter:
Pos. 1 - Pos. 11
I found a picture with the same set number and checked with my set. The number of parts from the source matches my set. I have adjusted the number, and adjusted.
* Add 16 Part 3003 Black Brick 2 x 2
* Add 32 Part 3003 Blue Brick 2 x 2
* Add 26 Part 3001 Blue Brick 2 x 4
* Add 4 Part 2456 Blue Brick 2 x 6
* Add 4 Part 3007 Blue Brick 2 x 8
* Add 38 Part 3003 Red Brick 2 x 2
* Add 30 Part 3001 Red Brick 2 x 4
* Add 38 Part 3003 White Brick 2 x 2
* Add 30 Part 3001 White Brick 2 x 4
* Add 32 Part 3003 Yellow Brick 2 x 2
* Add 26 Part 3001 Yellow Brick 2 x 4
* Add 8 Part 30077 Yellow Fence 1 x 6 x 2
Comments from Submitter:
Pos. 1 - Pos. 11
I found a picture with the same set number and checked with my set. The number of parts from the source matches my set. I have adjusted the number, and adjusted.
But you say you have the set yourself, so could you please add an image of the
parts list on the box, showing quantities. Please do so in a new request (see
below).
I approved all the other requests, but because your requests were to add instead
of change, the logs now also show that I deleted all original listings for these
parts.
To change data of a part
(item number, color, quantity, inventory section or Match-id)
this is the procedure:
When you entered the Inventory Change Request page of a set, on the top of the
page you see the link [Inv] next to the set number.
Click it and you will see all Inventory id's in the left column:
If you want to change the quantity of part 30077 for example this id is 403713.
You can copy this number and go one step back, so you are on the edit page again.
1. you select action code [Change]
2. enter Inv Item ID 403713
3. enter Qty 8 (leave the fields you don't want to change empty)
4. add comments to specify your source of the request
5. Verify Changes
6. check your request and Submit Request
If you can provide a better image of the parts list on the box, I would appreciate
it if you would submit a new request to change the quantity of part 30077, so
I know my explanation works. You can remove the remaining request in this post
to add 8 of them.
* Add 16 Part 3003 Black Brick 2 x 2
* Add 32 Part 3003 Blue Brick 2 x 2
* Add 26 Part 3001 Blue Brick 2 x 4
* Add 4 Part 2456 Blue Brick 2 x 6
* Add 4 Part 3007 Blue Brick 2 x 8
* Add 38 Part 3003 Red Brick 2 x 2
* Add 30 Part 3001 Red Brick 2 x 4
* Add 38 Part 3003 White Brick 2 x 2
* Add 30 Part 3001 White Brick 2 x 4
* Add 32 Part 3003 Yellow Brick 2 x 2
* Add 26 Part 3001 Yellow Brick 2 x 4
* Add 8 Part 30077 Yellow Fence 1 x 6 x 2
Comments from Submitter:
Pos. 1 - Pos. 11
I found a picture with the same set number and checked with my set. The number of parts from the source matches my set. I have adjusted the number, and adjusted.
But you say you have the set yourself, so could you please add an image of the
parts list on the box, showing quantities. Please do so in a new request (see
below).
I approved all the other requests, but because your requests were to add instead
of change, the logs now also show that I deleted all original listings for these
parts.
To change data of a part
(item number, color, quantity, inventory section or Match-id)
this is the procedure:
When you entered the Inventory Change Request page of a set, on the top of the
page you see the link [Inv] next to the set number.
Click it and you will see all Inventory id's in the left column:
If you want to change the quantity of part 30077 for example this id is 403713.
You can copy this number and go one step back, so you are on the edit page again.
1. you select action code [Change]
2. enter Inv Item ID 403713
3. enter Qty 8 (leave the fields you don't want to change empty)
4. add comments to specify your source of the request
5. Verify Changes
6. check your request and Submit Request
If you can provide a better image of the parts list on the box, I would appreciate
it if you would submit a new request to change the quantity of part 30077, so
I know my explanation works. You can remove the remaining request in this post
to add 8 of them.
* Add 16 Part 3003 Black Brick 2 x 2
* Add 32 Part 3003 Blue Brick 2 x 2
* Add 26 Part 3001 Blue Brick 2 x 4
* Add 4 Part 2456 Blue Brick 2 x 6
* Add 4 Part 3007 Blue Brick 2 x 8
* Add 38 Part 3003 Red Brick 2 x 2
* Add 30 Part 3001 Red Brick 2 x 4
* Add 38 Part 3003 White Brick 2 x 2
* Add 30 Part 3001 White Brick 2 x 4
* Add 32 Part 3003 Yellow Brick 2 x 2
* Add 26 Part 3001 Yellow Brick 2 x 4
* Add 8 Part 30077 Yellow Fence 1 x 6 x 2
Comments from Submitter:
Pos. 1 - Pos. 11
I found a picture with the same set number and checked with my set. The number of parts from the source matches my set. I have adjusted the number, and adjusted.
But you say you have the set yourself, so could you please add an image of the
parts list on the box, showing quantities. Please do so in a new request (see
below).
I approved all the other requests, but because your requests were to add instead
of change, the logs now also show that I deleted all original listings for these
parts.
To change data of a part
(item number, color, quantity, inventory section or Match-id)
this is the procedure:
When you entered the Inventory Change Request page of a set, on the top of the
page you see the link [Inv] next to the set number.
Click it and you will see all Inventory id's in the left column:
If you want to change the quantity of part 30077 for example this id is 403713.
You can copy this number and go one step back, so you are on the edit page again.
1. you select action code [Change]
2. enter Inv Item ID 403713
3. enter Qty 8 (leave the fields you don't want to change empty)
4. add comments to specify your source of the request
5. Verify Changes
6. check your request and Submit Request
If you can provide a better image of the parts list on the box, I would appreciate
it if you would submit a new request to change the quantity of part 30077, so
I know my explanation works. You can remove the remaining request in this post
to add 8 of them.
Switzerland, St. Gallen
Netherlands, Gelderland
