Discussion Forum: Thread 257509

 Author: SezaR View Messages Posted By SezaR
 Posted: Sep 18, 2019 14:37
 Subject: Inventory Change Request for Set 112-2
 Viewed: 46 times
 Topic: Inventories Requests (Entry)
 Status:Open
Cancel Message
Cancel
Reply to Message
Reply
BrickLink
ID Card

SezaR (173)

Location:  Canada, British Columbia
Member Since Contact Type Status
Jan 15, 2015 Contact Member Seller
Buying Privileges - OKSelling Privileges - OK
Store: Sezar's trains
Please make changes to the following inventory:
 
Set No: 112  Name: Locomotive with Motor
* 
112-2 (Inv) Locomotive with Motor
77 Parts, 1966
Sets: Train: 4.5V

* Add 1 Part bb0007c01pb02 Blue Electric, Motor 4.5V Type A 12 x 4 x 4 with Glued Black Plate 2 x 4 with Holes for Cable Connectors with 4.5 VOLT stamped on front (Alternate) (match ID 3)
* Add 1 Part 3230a Blue Train, Track Tapered Rail Curved Inside
* Add 1 Part 3229a Blue Train, Track Tapered Rail Curved Outside
* Add 1 Part 3228a Blue Train, Track Tapered Rail Straight 16L
* Delete 4 Part wheel1b Red Train Wheel with 2 x 2 Stud Center, Beveled Tread and Cam Axle for Motor
* Add 4 Part wheel1bc01 Red Train Wheel with 2 x 2 Stud Center, Beveled Tread and Cam Axle for Motor with Light Gray Train Rim for 4.5V & 12V Locomotive Wheels (wheel1b / trainrim)
* Delete 4 Part trainrim Light Gray Train Rim for 4.5V & 12V Locomotive Wheels
* Add 3 Part 3034 White Plate 2 x 8
* Change 1 Part Blue bb0007 Electric, Motor 4.5V Type A 12 x 4 x 4 {match ID 0 to 3}
 Author: SezaR View Messages Posted By SezaR
 Posted: Sep 18, 2019 14:39
 Subject: Re: Inventory Change Request for Set 112-2
 Viewed: 32 times
 Topic: Inventories Requests
Cancel Message
Cancel
Reply to Message
Reply
BrickLink
ID Card

SezaR (173)

Location:  Canada, British Columbia
Member Since Contact Type Status
Jan 15, 2015 Contact Member Seller
Buying Privileges - OKSelling Privileges - OK
Store: Sezar's trains
In Inventories Requests, SezaR writes:
  Please make changes to the following inventory:
 
Set No: 112  Name: Locomotive with Motor
* 
112-2 (Inv) Locomotive with Motor
77 Parts, 1966
Sets: Train: 4.5V

* Add 1 Part bb0007c01pb02 Blue Electric, Motor 4.5V Type A 12 x 4 x 4 with Glued Black Plate 2 x 4 with Holes for Cable Connectors with 4.5 VOLT stamped on front (Alternate) (match ID 3)
* Add 1 Part 3230a Blue Train, Track Tapered Rail Curved Inside
* Add 1 Part 3229a Blue Train, Track Tapered Rail Curved Outside
* Add 1 Part 3228a Blue Train, Track Tapered Rail Straight 16L
* Delete 4 Part wheel1b Red Train Wheel with 2 x 2 Stud Center, Beveled Tread and Cam Axle for Motor
* Add 4 Part wheel1bc01 Red Train Wheel with 2 x 2 Stud Center, Beveled Tread and Cam Axle for Motor with Light Gray Train Rim for 4.5V & 12V Locomotive Wheels (wheel1b / trainrim)
* Delete 4 Part trainrim Light Gray Train Rim for 4.5V & 12V Locomotive Wheels
* Add 3 Part 3034 White Plate 2 x 8
* Change 1 Part Blue bb0007 Electric, Motor 4.5V Type A 12 x 4 x 4 {match ID 0 to 3}

Attached photos of an earlier release, sold in Italia few months ago.
 


 Author: SezaR View Messages Posted By SezaR
 Posted: Sep 18, 2019 14:48
 Subject: Re: Inventory Change Request for Set 112-2
 Viewed: 47 times
 Topic: Inventories Requests
Cancel Message
Cancel
Reply to Message
Reply
BrickLink
ID Card

SezaR (173)

Location:  Canada, British Columbia
Member Since Contact Type Status
Jan 15, 2015 Contact Member Seller
Buying Privileges - OKSelling Privileges - OK
Store: Sezar's trains
In Inventories Requests, SezaR writes:
  Please make changes to the following inventory:
 
Set No: 112  Name: Locomotive with Motor
* 
112-2 (Inv) Locomotive with Motor
77 Parts, 1966
Sets: Train: 4.5V

* Add 1 Part bb0007c01pb02 Blue Electric, Motor 4.5V Type A 12 x 4 x 4 with Glued Black Plate 2 x 4 with Holes for Cable Connectors with 4.5 VOLT stamped on front (Alternate) (match ID 3)
* Add 1 Part 3230a Blue Train, Track Tapered Rail Curved Inside
* Add 1 Part 3229a Blue Train, Track Tapered Rail Curved Outside
* Add 1 Part 3228a Blue Train, Track Tapered Rail Straight 16L
* Delete 4 Part wheel1b Red Train Wheel with 2 x 2 Stud Center, Beveled Tread and Cam Axle for Motor
* Add 4 Part wheel1bc01 Red Train Wheel with 2 x 2 Stud Center, Beveled Tread and Cam Axle for Motor with Light Gray Train Rim for 4.5V & 12V Locomotive Wheels (wheel1b / trainrim)
* Delete 4 Part trainrim Light Gray Train Rim for 4.5V & 12V Locomotive Wheels
* Add 3 Part 3034 White Plate 2 x 8
* Change 1 Part Blue bb0007 Electric, Motor 4.5V Type A 12 x 4 x 4 {match ID 0 to 3}

See attached photos of a new later release given to me from a collector.

Randy,

I cannot add wires. I don't see why no decision on the project of wire is
not yet taken, after about 6 months. All it is needed to accept that

- the length of wires are not exact (and cannot be defined to be exact in the
title); - the length of wire/connector assembly shall be defined in terms of
the length of wire, like "wire/connector assembly....with wire of length approximately
90cm";

Cheers,
Reza
 






 Author: randyf View Messages Posted By randyf
 Posted: Sep 18, 2019 21:42
 Subject: Re: Inventory Change Request for Set 112-2
 Viewed: 21 times
 Topic: Inventories Requests
Cancel Message
Cancel
Reply to Message
Reply
BrickLink
ID Card

randyf (373)

Location:  USA, Ohio
Member Since Contact Type Status
Sep 16, 2009 Contact Member Seller
Buying Privileges - OKSelling Privileges - OK
Store Closed Store: The Bricking Spectre
BrickLink Inventories Administrator (?)
In Inventories Requests, SezaR writes:
  In Inventories Requests, SezaR writes:
  Please make changes to the following inventory:
 
Set No: 112  Name: Locomotive with Motor
* 
112-2 (Inv) Locomotive with Motor
77 Parts, 1966
Sets: Train: 4.5V

* Add 1 Part bb0007c01pb02 Blue Electric, Motor 4.5V Type A 12 x 4 x 4 with Glued Black Plate 2 x 4 with Holes for Cable Connectors with 4.5 VOLT stamped on front (Alternate) (match ID 3)
* Add 1 Part 3230a Blue Train, Track Tapered Rail Curved Inside
* Add 1 Part 3229a Blue Train, Track Tapered Rail Curved Outside
* Add 1 Part 3228a Blue Train, Track Tapered Rail Straight 16L
* Delete 4 Part wheel1b Red Train Wheel with 2 x 2 Stud Center, Beveled Tread and Cam Axle for Motor
* Add 4 Part wheel1bc01 Red Train Wheel with 2 x 2 Stud Center, Beveled Tread and Cam Axle for Motor with Light Gray Train Rim for 4.5V & 12V Locomotive Wheels (wheel1b / trainrim)
* Delete 4 Part trainrim Light Gray Train Rim for 4.5V & 12V Locomotive Wheels
* Add 3 Part 3034 White Plate 2 x 8
* Change 1 Part Blue bb0007 Electric, Motor 4.5V Type A 12 x 4 x 4 {match ID 0 to 3}

See attached photos of a new later release given to me from a collector.

Randy,

I cannot add wires. I don't see why no decision on the project of wire is
not yet taken, after about 6 months. All it is needed to accept that

I am on the inventories side and not the catalog side. It is up to Marek and
the new Catalog Associate Paul to take up catalog projects. Marek has been alone
since the beginning of the year and approving new items to the catalog and approving
changes to the catalog takes all of his time. Once Paul gets ramped up, the catalog
side will be able to do more. So if you want the project started, you will need
to lobby them at this time. When I become a Catalog Associate around the end
of October or early Novemeber, I would be happy to start a dialog then if something
has not been started.

Cheers,
Randy

  - the length of wires are not exact (and cannot be defined to be exact in the
title); - the length of wire/connector assembly shall be defined in terms of
the length of wire, like "wire/connector assembly....with wire of length approximately
90cm";

Cheers,
Reza
 Author: SezaR View Messages Posted By SezaR
 Posted: Sep 18, 2019 23:24
 Subject: Re: Inventory Change Request for Set 112-2
 Viewed: 17 times
 Topic: Inventories Requests
Cancel Message
Cancel
Reply to Message
Reply
BrickLink
ID Card

SezaR (173)

Location:  Canada, British Columbia
Member Since Contact Type Status
Jan 15, 2015 Contact Member Seller
Buying Privileges - OKSelling Privileges - OK
Store: Sezar's trains
In Inventories Requests, randyf writes:
  In Inventories Requests, SezaR writes:
  In Inventories Requests, SezaR writes:
  Please make changes to the following inventory:
 
Set No: 112  Name: Locomotive with Motor
* 
112-2 (Inv) Locomotive with Motor
77 Parts, 1966
Sets: Train: 4.5V

* Add 1 Part bb0007c01pb02 Blue Electric, Motor 4.5V Type A 12 x 4 x 4 with Glued Black Plate 2 x 4 with Holes for Cable Connectors with 4.5 VOLT stamped on front (Alternate) (match ID 3)
* Add 1 Part 3230a Blue Train, Track Tapered Rail Curved Inside
* Add 1 Part 3229a Blue Train, Track Tapered Rail Curved Outside
* Add 1 Part 3228a Blue Train, Track Tapered Rail Straight 16L
* Delete 4 Part wheel1b Red Train Wheel with 2 x 2 Stud Center, Beveled Tread and Cam Axle for Motor
* Add 4 Part wheel1bc01 Red Train Wheel with 2 x 2 Stud Center, Beveled Tread and Cam Axle for Motor with Light Gray Train Rim for 4.5V & 12V Locomotive Wheels (wheel1b / trainrim)
* Delete 4 Part trainrim Light Gray Train Rim for 4.5V & 12V Locomotive Wheels
* Add 3 Part 3034 White Plate 2 x 8
* Change 1 Part Blue bb0007 Electric, Motor 4.5V Type A 12 x 4 x 4 {match ID 0 to 3}

See attached photos of a new later release given to me from a collector.

Randy,

I cannot add wires. I don't see why no decision on the project of wire is
not yet taken, after about 6 months. All it is needed to accept that

I am on the inventories side and not the catalog side. It is up to Marek and
the new Catalog Associate Paul to take up catalog projects. Marek has been alone
since the beginning of the year and approving new items to the catalog and approving
changes to the catalog takes all of his time. Once Paul gets ramped up, the catalog
side will be able to do more. So if you want the project started, you will need
to lobby them at this time. When I become a Catalog Associate around the end
of October or early Novemeber, I would be happy to start a dialog then if something
has not been started.

Cheers,
Randy

  - the length of wires are not exact (and cannot be defined to be exact in the
title); - the length of wire/connector assembly shall be defined in terms of
the length of wire, like "wire/connector assembly....with wire of length approximately
90cm";

Cheers,
Reza

Thanks for explaining this.
Few months ago, I think you commented that you had ideas for this project, so
that's why I thought you could also make decisions.
 Author: Hygrotus View Messages Posted By Hygrotus
 Posted: Sep 19, 2019 04:48
 Subject: Re: Inventory Change Request for Set 112-2
 Viewed: 26 times
 Topic: Inventories Requests
Cancel Message
Cancel
Reply to Message
Reply
BrickLink
ID Card

Hygrotus (816)

Location:  Poland, w. Wielkopolskie
Member Since Contact Type Status Collage
Feb 3, 2011 Contact Member Seller
Buying Privileges - OKSelling Privileges - OK
View Collage Pic
Store Closed Store: The Insect Store
BrickLink Catalog Associate (?)
In Inventories Requests, SezaR writes:
  I cannot add wires. I don't see why no decision on the project of wire is
not yet taken, after about 6 months. All it is needed to accept that

Frankly I do not have any knowledge about them and that is why I don't want
to touch this topic, wating here for Randy. And yes as Randy said from the beggining
all my time is consumed by approval of new things, just check the callendar,
we recently are just flooded by many submissions. Lot of people started to subbmitt
many items and photos. It is good we are very glad and happy that many people
want to subbmit, but than there is not time for more to deal for exampe with
thing on road map.
https://www.bricklink.com/calendar.asp?v=C
This month is now almost 600 new items in the catalog and this is not the end
of the month
Last month was over 800
In June and April also over 800. Only in May and in July was less about ca. 500-600.
So since I'm on catalog there is no month with less than 450 items added
to the catalog.

(Feburary and March was after the Robert left)
and there is October nearby when many new sets will be released so more new items
will be submitted

and there are also catalog change requests which there are alredy 8124 changes
from the beggining of the year. We are probably going for the record here as
we have just september, so still three month to the end of the year and the record
was in 2014 with 8381 so a little bit over 250 we need beat the record

So catalog thriving
 Author: SezaR View Messages Posted By SezaR
 Posted: Sep 28, 2019 21:09
 Subject: Re: Inventory Change Request for Set 112-2
 Viewed: 17 times
 Topic: Inventories Requests
Cancel Message
Cancel
Reply to Message
Reply
BrickLink
ID Card

SezaR (173)

Location:  Canada, British Columbia
Member Since Contact Type Status
Jan 15, 2015 Contact Member Seller
Buying Privileges - OKSelling Privileges - OK
Store: Sezar's trains
In Inventories Requests, Hygrotus writes:
  In Inventories Requests, SezaR writes:
  I cannot add wires. I don't see why no decision on the project of wire is
not yet taken, after about 6 months. All it is needed to accept that

Frankly I do not have any knowledge about them and that is why I don't want
to touch this topic, wating here for Randy. And yes as Randy said from the beggining
all my time is consumed by approval of new things, just check the callendar,
we recently are just flooded by many submissions. Lot of people started to subbmitt
many items and photos. It is good we are very glad and happy that many people
want to subbmit, but than there is not time for more to deal for exampe with
thing on road map.
https://www.bricklink.com/calendar.asp?v=C
This month is now almost 600 new items in the catalog and this is not the end
of the month
Last month was over 800
In June and April also over 800. Only in May and in July was less about ca. 500-600.
So since I'm on catalog there is no month with less than 450 items added
to the catalog.

(Feburary and March was after the Robert left)
and there is October nearby when many new sets will be released so more new items
will be submitted

and there are also catalog change requests which there are alredy 8124 changes
from the beggining of the year. We are probably going for the record here as
we have just september, so still three month to the end of the year and the record
was in 2014 with 8381 so a little bit over 250 we need beat the record

So catalog thriving

Mark,

I truly appreciate your dedication and hard work on the catalog, as I do appreciate
the efforts of other catalog/inventory admins. Not just because you wrote this,
but I already wanted to express my gratitude as a Lego fan for your hard work.


P.S. I will make sure to submit many images/items/inventory changes,... once
I get time.