|
 |
| | | Author: | TyresOFlaherty  | | Posted: | Aug 30, 2018 15:22 | | Subject: | Inventory for comcon057-1 | | Viewed: | 75 times | | Topic: | Inventories | | Status: | Open | |
|
| I have this set and wondered if I could help add inventory (and minifigs and
the "alternate" minifig"). Can someone point me in the right direction? I'm
quite good with graphics and would be more than happy to take clean photos of
the new elements/prints in this set.
Thanks!
|
|
| | | | | | | | | | |
| | | | | | | Author: | TyresOFlaherty | | Posted: | Aug 31, 2018 16:44 | | Subject: | Re: Inventory for comcon057-1 | | Viewed: | 32 times | | Topic: | Inventories | |
|
| So I'm planning on making a minifig inventory for this set (as well as adding
an additional counterpart for the alternate face, same as comcon040).
As far as minifig names go, since these are the first two released for The Lego
Movie 2, should I either....
a. Continue with the tlm000 numbering system (starting with tlm101), OR
b. Start a new series with tlm2001
Or is there a place where this is already determined?
Thanks!
In Inventories, StormChaser writes:
|
|
|
| | | | | | | | | | | | | |
| | | | | | | | | Author: | axaday | | Posted: | Aug 31, 2018 16:51 | | Subject: | Re: Inventory for comcon057-1 | | Viewed: | 22 times | | Topic: | Inventories | |
|
| In Inventories, TyresOFlaherty writes:
| | So I'm planning on making a minifig inventory for this set (as well as adding
an additional counterpart for the alternate face, same as comcon040).
As far as minifig names go, since these are the first two released for The Lego
Movie 2, should I either....
a. Continue with the tlm000 numbering system (starting with tlm101), OR
b. Start a new series with tlm2001
Or is there a place where this is already determined?
Thanks!
In Inventories, StormChaser writes:
|
All the superheroes from all the Marvel movies and also DC and things not in
an actual movie are all in the same numbering series. I think things from The
Lego Movie 2 can be numbered with 1.
|
|
|
| | | | | | | | | | | | | | | | | |
| | | | | | | | | | | Author: | TyresOFlaherty | | Posted: | Aug 31, 2018 18:17 | | Subject: | Re: Inventory for comcon057-1 | | Viewed: | 30 times | | Topic: | Inventories | |
|
| Perfect, thanks for the quick reply! So at this stage, I have:
1. Reserved the set (for inventory)
2. Added all the new parts (pending approval)
3. Added new entries for the minifig/counterpart minifig (tlm101, tlm102, pending
approval)
4. Added photos for parts/minifigs (pending approval)
It seems I can't add the minifigs to set inventory until they've been
approved, so now I just wait? Did I miss any steps? Just want to make sure I'm
going about this in the right way.
Thanks again for everyone's help!
In Inventories, axaday writes:
| | In Inventories, TyresOFlaherty writes:
| | So I'm planning on making a minifig inventory for this set (as well as adding
an additional counterpart for the alternate face, same as comcon040).
As far as minifig names go, since these are the first two released for The Lego
Movie 2, should I either....
a. Continue with the tlm000 numbering system (starting with tlm101), OR
b. Start a new series with tlm2001
Or is there a place where this is already determined?
Thanks!
In Inventories, StormChaser writes:
|
All the superheroes from all the Marvel movies and also DC and things not in
an actual movie are all in the same numbering series. I think things from The
Lego Movie 2 can be numbered with 1.
|
|
|
|
| | | | | | | | | | | | | | | | | | | | | |
| | | | | | | | | | | | | Author: | axaday | | Posted: | Aug 31, 2018 19:04 | | Subject: | Re: Inventory for comcon057-1 | | Viewed: | 20 times | | Topic: | Inventories | |
|
| In Inventories, TyresOFlaherty writes:
| | Perfect, thanks for the quick reply! So at this stage, I have:
1. Reserved the set (for inventory)
2. Added all the new parts (pending approval)
3. Added new entries for the minifig/counterpart minifig (tlm101, tlm102, pending
approval)
4. Added photos for parts/minifigs (pending approval)
It seems I can't add the minifigs to set inventory until they've been
approved, so now I just wait? Did I miss any steps? Just want to make sure I'm
going about this in the right way.
Thanks again for everyone's help!
In Inventories, axaday writes:
| | In Inventories, TyresOFlaherty writes:
| | So I'm planning on making a minifig inventory for this set (as well as adding
an additional counterpart for the alternate face, same as comcon040).
As far as minifig names go, since these are the first two released for The Lego
Movie 2, should I either....
a. Continue with the tlm000 numbering system (starting with tlm101), OR
b. Start a new series with tlm2001
Or is there a place where this is already determined?
Thanks!
In Inventories, StormChaser writes:
|
All the superheroes from all the Marvel movies and also DC and things not in
an actual movie are all in the same numbering series. I think things from The
Lego Movie 2 can be numbered with 1.
|
|
Sounds right. One of the Catmins is in the US and the other in Deutscheland,
so sometimes it is like we have 24/7 coverage, but just remember they've
got lives and jobs and what not. So sometimes nothing happens until after you
go to bed. I just looked at your pending stuff and no problems jump out at me.
Now you just wait for the wheels of the machine to turn.
|
|
|
| | | | | | | | | | | | | | | | | | | | | | | | | |
| | | | | | | | | | | | | | | Author: | TyresOFlaherty | | Posted: | Aug 31, 2018 19:42 | | Subject: | Re: Inventory for comcon057-1 | | Viewed: | 30 times | | Topic: | Inventories | |
|
| No worries! Thanks for the quick reply. Not breathing down anyone's neck,
just wanted to make sure I was doing everything right.
Have a great weekend!
In Inventories, axaday writes:
| | In Inventories, TyresOFlaherty writes:
| | Perfect, thanks for the quick reply! So at this stage, I have:
1. Reserved the set (for inventory)
2. Added all the new parts (pending approval)
3. Added new entries for the minifig/counterpart minifig (tlm101, tlm102, pending
approval)
4. Added photos for parts/minifigs (pending approval)
It seems I can't add the minifigs to set inventory until they've been
approved, so now I just wait? Did I miss any steps? Just want to make sure I'm
going about this in the right way.
Thanks again for everyone's help!
In Inventories, axaday writes:
| | In Inventories, TyresOFlaherty writes:
| | So I'm planning on making a minifig inventory for this set (as well as adding
an additional counterpart for the alternate face, same as comcon040).
As far as minifig names go, since these are the first two released for The Lego
Movie 2, should I either....
a. Continue with the tlm000 numbering system (starting with tlm101), OR
b. Start a new series with tlm2001
Or is there a place where this is already determined?
Thanks!
In Inventories, StormChaser writes:
|
All the superheroes from all the Marvel movies and also DC and things not in
an actual movie are all in the same numbering series. I think things from The
Lego Movie 2 can be numbered with 1.
|
|
Sounds right. One of the Catmins is in the US and the other in Deutscheland,
so sometimes it is like we have 24/7 coverage, but just remember they've
got lives and jobs and what not. So sometimes nothing happens until after you
go to bed. I just looked at your pending stuff and no problems jump out at me.
Now you just wait for the wheels of the machine to turn.
|
|
|
|
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
| | | | | | | | | | | | | | | | | Author: | TyresOFlaherty | | Posted: | Sep 5, 2018 13:12 | | Subject: | Re: Inventory for comcon057-1 | | Viewed: | 40 times | | Topic: | Inventories | |
|
| Looks like tlm102 (SDCC Angry Kitty) is still awaiting approval. I am planning
on that being a counterpart in the comcon057-1 set. Everything else seems to
have gone through ok, except that one. Just wanted to make sure I'd done
everything right there.
Thanks!
In Inventories, TyresOFlaherty writes:
| | No worries! Thanks for the quick reply. Not breathing down anyone's neck,
just wanted to make sure I was doing everything right.
Have a great weekend!
In Inventories, axaday writes:
| | In Inventories, TyresOFlaherty writes:
| | Perfect, thanks for the quick reply! So at this stage, I have:
1. Reserved the set (for inventory)
2. Added all the new parts (pending approval)
3. Added new entries for the minifig/counterpart minifig (tlm101, tlm102, pending
approval)
4. Added photos for parts/minifigs (pending approval)
It seems I can't add the minifigs to set inventory until they've been
approved, so now I just wait? Did I miss any steps? Just want to make sure I'm
going about this in the right way.
Thanks again for everyone's help!
In Inventories, axaday writes:
| | In Inventories, TyresOFlaherty writes:
| | So I'm planning on making a minifig inventory for this set (as well as adding
an additional counterpart for the alternate face, same as comcon040).
As far as minifig names go, since these are the first two released for The Lego
Movie 2, should I either....
a. Continue with the tlm000 numbering system (starting with tlm101), OR
b. Start a new series with tlm2001
Or is there a place where this is already determined?
Thanks!
In Inventories, StormChaser writes:
|
All the superheroes from all the Marvel movies and also DC and things not in
an actual movie are all in the same numbering series. I think things from The
Lego Movie 2 can be numbered with 1.
|
|
Sounds right. One of the Catmins is in the US and the other in Deutscheland,
so sometimes it is like we have 24/7 coverage, but just remember they've
got lives and jobs and what not. So sometimes nothing happens until after you
go to bed. I just looked at your pending stuff and no problems jump out at me.
Now you just wait for the wheels of the machine to turn.
|
|
|
|
|
| | | | | |
| | | | | Author: | axaday | | Posted: | Aug 30, 2018 15:38 | | Subject: | Re: Inventory for comcon057-1 | | Viewed: | 25 times | | Topic: | Inventories | |
|
| In Inventories, TyresOFlaherty writes:
| | I have this set and wondered if I could help add inventory (and minifigs and
the "alternate" minifig"). Can someone point me in the right direction? I'm
quite good with graphics and would be more than happy to take clean photos of
the new elements/prints in this set.
Thanks!
|
My goodness, I didn't even realize this one existed.
|
|
|
|
|
USA, Utah
