Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies| Author: | 69transamman  | | Posted: | Apr 7, 2024 00:51 | | Subject: | Re: Identify kraata to match with correct set | | Viewed: | 28 times | | Topic: | Catalog Identification | |
|
| Hi!
My advice on identifying Kraata is first to determine which stage (There are
six, each with a different pattern embossed.) kraata stage you have. Next on
the page for each stage of kraata, click the link under Appears In (This
takes you to the page showing all the sets that stage krata appeared in.)using
the head color only decide which set the kraata may have come from. You can post
your own photo of the kraata with the set when you list it for sale. Hope this
helps!
Howard
In Catalog Identification, 2ozboyz writes:
| | Hi,
I believe these two-tone kraata are supposed to go in the Rahkshi sets of Bionicles.
But I couldn't match them with any of the kraata pictured in the catalog.
(I'm a new user so maybe I'm not looking in the right place.)
The colors are hard to describe.
The one on the left is black with brown.
The middle one is gold with black.
The one on the right is gold with yellow.
If you could tell me which sets they belong to...or let me know where to look
for more information, I'd appreciate it.
Many thanks,
2ozboyz
|
|
 |
| Author: | 69transamman | | Posted: | Mar 17, 2024 21:52 | | Subject: | Part looks like 92693c01 but numbered 37773 | | Viewed: | 110 times | | Topic: | Catalog Requests | | For: | Catalog Associate | | Status: | Open | |
|
| While working on a project today I pulled my supply of 92693c01s and noticed
that some looked different. Further investigation revealed a different part number
on the side (37773), numbers on the dark gray part (2 variations-(31x9) & (46x9),
and differences in the construction of the main housing. All three parts have
the Lego logo, connect and function the same. Is this known variant are new piece
for the catalog? In the photo 92693c01 is at the top the lower two are 37773.
|
|
|
| Author: | 69transamman | | Posted: | Sep 3, 2020 01:12 | | Subject: | Re: Inventory Change Request for Set 6766-1 | | Viewed: | 15 times | | Topic: | Inventories Requests | |
|
| Thanks for straightening out my mess!
Howard
In Inventories Requests, randyf writes:
| | In Inventories Requests, 69transamman writes:
| | Please make changes to the following inventory:
* Change {2 to 1} Minifig {ww016 Indian Tan Shirt, Quiver to ww026 Indian Tan Shirt}
Comments from Submitter:
Change quantity of ww016 from 2 to 1. The second ww016 is actually a ww026.
|
This change request removed both ww016 from the inventory, therefore I manually
added one ww016 back into the inventory. I also manually added the quiver to
the Regular Items section.
Cheers,
Randy
|
|
|
| Author: | 69transamman | | Posted: | Sep 2, 2020 21:44 | | Subject: | Inventory Change Request for Set 6766-1 | | Viewed: | 13 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change {2 to 1} Minifig {ww016 Indian Tan Shirt, Quiver to ww026 Indian Tan Shirt}
Comments from Submitter:
Change quantity of ww016 from 2 to 1. The second ww016 is actually a ww026.
|
|
| Author: | 69transamman | | Posted: | Sep 2, 2020 21:40 | | Subject: | Inventory Change Request for Set 6763-1 | | Viewed: | 17 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change {2 to 1} Minifig {ww016 Indian Tan Shirt, Quiver to ww026 Indian Tan Shirt}
Comments from Submitter:
Change quantity of ww016 from 2 to 1. The second ww016 is actually aww026.
|
|
| Author: | 69transamman | | Posted: | Sep 2, 2020 21:32 | | Subject: | Re: Inventory Change Request for Set 6763-1 | | Viewed: | 11 times | | Topic: | Inventories Requests | |
|
| Thanks for the response! I hadn't thought of using the "change" just for
the quantity. I'll give that a try!
Howard
In Inventories Requests, Brickitty writes:
| | In Inventories Requests, 69transamman writes:
| | I removed the original inventory request to delete the 2 ww016 mini-figures and
re-requested to delete 1 of ww016 but the system continues to show deleting
2. I'm sure there must be a way, short of deleting both ww016s and adding
back 1 ww016. What am I doing wrong?
Howard
In Inventories Requests, 69transamman writes:
| | Please make changes to the following inventory:
* Delete 2 Minifig ww016 Indian Tan Shirt, Quiver
|
|
I believe you have to use "Change" and enter the Inv Item ID and "1" in the Qty
field as your only change. Choosing "Delete" will always delete the entire entry
rather than paying attention to anything you put in the other fields.
|
|
|
| Author: | 69transamman | | Posted: | Sep 2, 2020 15:24 | | Subject: | Re: Inventory Change Request for Set 6763-1 | | Viewed: | 12 times | | Topic: | Inventories Requests | |
|
| I removed the original inventory request to delete the 2 ww016 mini-figures and
re-requested to delete 1 of ww016 but the system continues to show deleting
2. I'm sure there must be a way, short of deleting both ww016s and adding
back 1 ww016. What am I doing wrong?
Howard
In Inventories Requests, 69transamman writes:
| | Please make changes to the following inventory:
* Delete 2 Minifig ww016 Indian Tan Shirt, Quiver
|
|
|
| Author: | 69transamman | | Posted: | Sep 2, 2020 15:20 | | Subject: | Inventory Change Request for Set 6763-1 | | Viewed: | 23 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 2 Minifig ww016 Indian Tan Shirt, Quiver
|
|
| Author: | 69transamman | | Posted: | Sep 2, 2020 15:10 | | Subject: | Re: Inventory Change Request for Set 6763-1 | | Viewed: | 14 times | | Topic: | Inventories Requests | |
|
| Not sure why but, instead of requesting to delete one of quantity ww016, as I
typed into the form, the system is auto-requesting to delete 2 of them. There
should be 1 of ww016 in this set.
Howard
In Inventories Requests, 69transamman writes:
| | Please make changes to the following inventory:
* Delete 2 Minifig ww016 Indian Tan Shirt, Quiver
* Add 1 Minifig ww026 Indian Tan Shirt
Comments from Submitter:
Corrections to mini-figure inventory. Correct inventory should have one of ww016 & one of ww026, instead of 2 ww016.
|
|
|
| Author: | 69transamman | | Posted: | Sep 2, 2020 15:09 | | Subject: | Re: Inventory Change Request for Set 6766-1 | | Viewed: | 12 times | | Topic: | Inventories Requests | |
|
| Not sure why but, instead of requesting to delete one of quantity ww016, as I
typed into the form, the system is auto-requesting to delete 2 of them. There
should be 1 of ww016 in this set.
Howard
In Inventories Requests, 69transamman writes:
| | Please make changes to the following inventory:
* Delete 2 Minifig ww016 Indian Tan Shirt, Quiver
* Add 1 Minifig ww026 Indian Tan Shirt
Comments from Submitter:
Changes to correct inventory. Should have 1 of ww016 & 1 of ww026, not 2 of ww016.
|
|
|
| Author: | 69transamman | | Posted: | Sep 2, 2020 15:01 | | Subject: | Inventory Change Request for Set 6766-1 | | Viewed: | 24 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 2 Minifig ww016 Indian Tan Shirt, Quiver
* Add 1 Minifig ww026 Indian Tan Shirt
Comments from Submitter:
Changes to correct inventory. Should have 1 of ww016 & 1 of ww026, not 2 of ww016.
|
|
| Author: | 69transamman | | Posted: | Sep 2, 2020 14:58 | | Subject: | Inventory Change Request for Set 6763-1 | | Viewed: | 24 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 2 Minifig ww016 Indian Tan Shirt, Quiver
* Add 1 Minifig ww026 Indian Tan Shirt
Comments from Submitter:
Corrections to mini-figure inventory. Correct inventory should have one of ww016 & one of ww026, instead of 2 ww016.
|
|
| Author: | 69transamman | | Posted: | Sep 2, 2020 13:33 | | Subject: | Inventory Change Request for Set 6763-1 | | Viewed: | 26 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 4498 Black Minifigure, Arrow Quiver with Two Arrows
Comments from Submitter:
Quiver currently incorrectly shown as part of mini-figure inventory. New mini-figure submission without quiver pending.
|
|
| Author: | 69transamman | | Posted: | Sep 2, 2020 12:16 | | Subject: | Error in Mini-figures for sets 6763 & 6766? | | Viewed: | 59 times | | Topic: | Inventories | | Status: | Open | |
|
| If I understand the Bricklink "Standards for Inventorying a Mini-figure" correctly,
there is an error in the Mini-figure listing for set 6763 & 6766. According to
the instructions for both sets one of the 2 ww016 is to be (lower right mini-figure)
assembled without an arrow quiver making that figure different. There is a fourth
quiver included with the set that should be moved to the regular inventory, as
the directions show it hanging on the ladder in step #7. If I'm correct,
I'll be happy to submit the necessary inventory change requests. Also while
I'm asking, if the correction is needed and the new min-figure number is
required would that number be ww026 (It's the next available number in the
ww0? order)?
Howard
|
|
|
| Author: | 69transamman | | Posted: | Aug 25, 2020 01:26 | | Subject: | Re: Inventory Change Request for Set 8744-1 | | Viewed: | 18 times | | Topic: | Inventories Requests | |
|
| I believe there may have been a running change during the production of this
set. While the pictures shown in the "Brick Instructions" link you posted show
a 47296. The instructions on the LEGO website https://www.lego.com/cdn/product-assets/product.bi.core.pdf/4286086.pdf
show the 50898. (LEGO was known to make running changes to parts included
with sets and adjust the instructions to match the parts included. The Toa Lhikan
& Kikanalo set #8811 came with either (2 Black 1x9 liftarms & 1 1x11 black liftarm)
or (3 black liftarms). This set has a note at the bottom of the inventory stating
was redesigned during production and 2 different instructions are available.)
This set should have the 47296 added as an alternate and have a note added to
the inventory that 2 different instruction sheets exist. I took a quick look
at the instructions for the remaining Visorack sets 8742, 8743, 8745, 8746, &
8747at both locations. I didn't notice any differences in the instruction
provided by those sites and the current inventories match.
Howard
Inventories Requests, quicksb writes:
| | Please make changes to the following inventory:
* Change 1 Part Black {50898 Technic, Axle and Pin Connector 2 x 7 with Two Ball Joint Sockets to 47296 Technic, Axle and Pin Connector 2 x 5 with Two Ball Joint Sockets}
Comments from Submitter:
Step 4, black 2x7 connector was too big, pic is 2x5 black. https://lego.brickinstructions.com/en/lego_instructions/set/8744/Visorak_Oohnorak
I have the black one, i can upload pic, its not even listed in bricklink???
|
|
|
| Author: | 69transamman | | Posted: | Jul 18, 2020 14:17 | | Subject: | Re: print variant of head 3626bpx13? | | Viewed: | 32 times | | Topic: | Catalog | |
|
| I believe what you've found is a slightly worn 3626bpx75 . The
eyes, hair, and mustache are the same, the beard is the only difference in the
print.
Howard
In Catalog, crepundi writes:
| | I found a head from a pirate set that looks like 3626bpx13, but instead of dots
as stubbles it has stripes. Is it another print variant or a different head?
Gisela
|
|
|
| Author: | 69transamman | | Posted: | Jul 12, 2020 13:55 | | Subject: | 8924-1 Maxilos & Spinax-#53566 in Flat Silver | | Viewed: | 39 times | | Topic: | Inventories | | Status: | Open | |
|
| I recently took my 8924 set, that I purchased new, down from it's hallowed
position on the shelf for a cleaning with the intention of selling it. Since
it's purchase it has been never been played with or disassembled. It has
been a display model in my Lego room, only touched to dust on occasion. As part
of my preparation for selling the set, it was disassembled and cleaned before
verifying the inventory. During the inventory verification, I saw that three
parts were listed as Flat Silver; However, my set
has these parts in Pearl Light Gray. I did some investigating and noticed that
the parts list in the instruction book, has these parts are grouped/listed among
the Pearl Light Gray parts. Not grouped separately as another color normally
would be. Continuing to look for clarification I visited the "Bricks & Pieces"
section of the LEGO website. Although these parts are not currently available
from LEGO, the Element Id & The Design Number are still viewable. I also, checked
Design Number for part #53566 and LEGO has only offered this part in one silver
color. Viewing the inventory on the LEGO website, LEGO list all the silver related
parts as "Silver" in this set, there are no distinctions. I tried to find an
unboxing video for this set on u-Tube but, I was only able to find a couple of
assembly videos, in which these parts appear Pearl Light Gray. Reviewing the
"Log of Completed Changes", there are several other pieces that were originally
listed as Flat Silver that have been changed to Pearl Light Gray. Based on my
findings,I have the following questions?
1)-Were parts of the original inventory for this set (inadvertently) listed under
the wrong color?
2)-Should I submit an inventory change request for these 3 parts?
3)-Can anyone verify via photo the existence of any of these 3 parts in Flat
Silver (A photo of a side by side comparison would be great!)?
4)-I know that there was a period of time when LEGO changed the shade of their
"Silver", can someone tell me the time frame for the change?
Thanks in advance!
Howard
|
|
| Author: | 69transamman | | Posted: | Apr 19, 2020 09:30 | | Subject: | Re: Inventory Change Request for Set 8762-1 | | Viewed: | 22 times | | Topic: | Inventories Requests | |
|
| I believe that you're request to change the inventory of this set is in error.
Step 10 of the instructions (downloaded from the Lego web site) shows 2-12 length
axles being used for the staff/weapon.
Howard
In Inventories Requests, kennyBrown writes:
| | Please make changes to the following inventory:
* Change {2 to 1} Part Black 3708 Technic, Axle 12
Comments from Submitter:
Total is 1 Black axle length 12
|
|
|
| Author: | 69transamman | | Posted: | Mar 14, 2020 00:18 | | Subject: | Parts 89650 & 60153 | | Viewed: | 62 times | | Topic: | Catalog | | Status: | Open | |
|
| The catalog has separate listing for parts 89652 & 60176, the only difference
being the open lower axle holes. For consistency shouldn't parts 89650 &
61053 have separate listings, they differ in the same way from each other.
Howard
|
|
|
| Author: | 69transamman | | Posted: | Mar 13, 2020 20:11 | | Subject: | Re: 7179 W/Flat Silver Parts-Not Pearl Light Gray | | Viewed: | 30 times | | Topic: | Inventories | |
|
| Should the Flat Silver parts be added to set 7168-1 as alternates as well? One
of my 7168-1's did not come from a sealed set but, it did come fully assembled
with the Flat Silver parts.
Howard
In Inventories, randyf writes:
| | In Inventories, 69transamman writes:
| | Yes, all 11 parts in my 7179 are Flat Silver. I'm not sure which wave 7168
came in, both sets have 2010 as the year released. But, I do have set 7168 in
Pearl Light Gray. My 2nd 7168 might actually be a "Bulk" from another copy of
set 7179. I'll get pictures of all 3 of them and submit them as additional
images, for the appropriatesets
Howard
|
Thanks a lot, Howard. Having images for both colors of all the parts would be
great. I will get the inventory updated.
Cheers,
Randy
|
|
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|
USA, South Carolina
)
)
)
)
)
)