Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies| Author: | Mirko8710  | | Posted: | May 23, 2020 17:32 | | Subject: | Inventory Change Request for Set 75928-1 | | Viewed: | 20 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 2 Part 3010pb289 Dark Blue Brick 1 x 4 with 'JW16N15' Pattern (Sticker) - Set 75928 (Counterpart)
* Add 1 Part 41748pb077 Dark Bluish Gray Wedge 6 x 2 Left with Black Vents Pattern (Sticker) - Set 75928 (Counterpart)
* Add 1 Part 41747pb077 Dark Bluish Gray Wedge 6 x 2 Right with Black Vents Pattern (Sticker) - Set 75928 (Counterpart)
* Add 2 Part 62743pb006 Light Bluish Gray Plate, Modified 2 x 16 with Dark Blue Rettangles Pattern (Sticker) - Set 75928 (Counterpart)
* Add 1 Part 2340pb069 Dark Bluish Gray Tail 4 x 1 x 3 with Jurassic World Logo Pattern on Both Sides (Stickers) - Set 75928 (Counterpart)
* Add 1 Part 15068pb250 Light Bluish Gray Slope, Curved 2 x 2 with Dark Bluish Gray Tank Cap and Gasoline Pattern (Sticker) - Set 75928 (Counterpart)
* Add 1 Part 11293pb011 Dark Blue Aircraft Fuselage Curved Forward 6 x 8 Top with Jurassic World Dino Pattern (Sticker) - Set 75928 (Counterpart)
|
 |
| Author: | SezaR | | Posted: | May 23, 2020 17:25 | | Subject: | Inventory Change Request for Set 7720-1 | | Viewed: | 21 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 2 Part BA141pb01 Red Stickered Assembly 3 x 1 x 1 with Black and Yellow Danger Stripes Pattern on Left side (Sticker) - Set 7720 - 1 Brick, Modified 1 x 1 with Headlight, 1 Brick 1 x 2 (Counterpart)
* Add 2 Part BA141pb02 Red Stickered Assembly 3 x 1 x 1 with Black and Yellow Danger Stripes Pattern on Right side (Sticker) - Set 7720 - 1 Brick, Modified 1 x 1 with Headlight, 1 Brick 1 x 2 (Counterpart)
* Add 2 Part 3010pb293 Red Brick 1 x 4 with with Black and Yellow Danger Stripes Pattern (Sticker) - Set 7720 (Counterpart)
|
|
| Author: | randyf | | Posted: | May 23, 2020 17:10 | | Subject: | Inventory Change Request for Set 6582-1 | | Viewed: | 17 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Minifig {ext003 Extreme Team - Gray with Dark Gray Helmet to ext003a Extreme Team - Gray with Dark Gray Helmet}
Comments from Submitter:
From sealed set contents.
|
| Author: | cptnruthless | | Posted: | May 23, 2020 16:08 | | Subject: | Inventory Change Request for Set 75892-1 | | Viewed: | 20 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 3040pb025R Dark Bluish Gray Slope 45 2 x 1 with Engine Vent Pattern Model Right Side (Sticker) - Set 75892 (Counterpart)
|
|
| Author: | Dimi_DBB | | Posted: | May 23, 2020 14:37 | | Subject: | item name for decorated counterparts | | Viewed: | 54 times | | Topic: | Catalog | | Status: | Open | |
|
| Hi,
I was parting out a used set of and there are some counterparts missing
from the BL catalog.
Since I have them, I thought it might be a good idea to add them to the catalog.
But I'm kind of stuck on how to give them a proper name.
I have absolutely no idea what those stickers are supposed to represent.
Can someone give me a hint?
|
|
|
| Author: | cptnruthless | | Posted: | May 23, 2020 13:04 | | Subject: | Inventory Change Request for Set 60207-1 | | Viewed: | 18 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 85984pb251 Dark Bluish Gray Slope 30 1 x 2 x 2/3 with '1932' Statue Plaque Pattern (Sticker) - Set 60207 (Counterpart)
|
|
| Author: | cptnruthless | | Posted: | May 23, 2020 13:03 | | Subject: | Inventory Change Request for Set 75892-1 | | Viewed: | 18 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 93095pb01R Black Panel 1 x 2 x 1 with Rounded Corners and Center Divider with Orange Polygon Pattern Model Right Side (Sticker) - Set 75892 (Counterpart)
* Add 1 Part 85984pb252 Black Slope 30 1 x 2 x 2/3 with 'McLaren' Pattern (Sticker) - Set 75892 (Counterpart)
* Add 1 Part 30602pb104 Trans-Black Slope, Curved 2 x 2 Lip with Black, Dark Bluish Grey and Orange Pattern (Sticker) - Set 75892 (Counterpart)
* Add 1 Part 3069bpb784L Black Tile 1 x 2 with Groove with Dark Grey Triangle Pattern Model Left Side (Sticker) - Set 75892 (Counterpart)
* Add 1 Part 29119pb003 Dark Bluish Gray Wedge 2 x 1 with Stud Notch Right with Orange Stripe Pattern (Sticker) - Set 75892 (Counterpart)
|
|
| Author: | randyf | | Posted: | May 23, 2020 03:17 | | Subject: | Re: Inventory Change Request for Set 8557-1 | | Viewed: | 24 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, eskeleto532 writes:
| | Please make changes to the following inventory:
* Change {25 to 23} Part Black 43093 Technic, Axle Pin with Friction Ridges Lengthwise
* Change {5 to 2} Part Light Gray 4265c Technic, Bush 1/2 Smooth
* Change {3 to 1} Part Black 3706 Technic, Axle 6
Comments from Submitter:
I checked with the official model and checked the parts used in the instructions and these parts have different quantities than the ones specified in the inventory
|
All of these pieces are needed to build the alternate model shown in the second
instruction manual that was included with the set:
https://www.lego.com/biassets/bi/4183117.pdf
The quantities of these pieces were also verified by the data in the LEGO replacement
parts system.
Since the inventory is correct concerning all of these parts, these requests
will not be accepted.
Cheers,
Randy
|
|
| Author: | axaday | | Posted: | May 22, 2020 22:55 | | Subject: | Re: Inventory Change Request for Set 75928-1 | | Viewed: | 19 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, Brixalotl writes:
| | In Inventories Requests, axaday writes:
| | In Inventories Requests, Brixalotl writes:
| | Please make changes to the following inventory:
* Add 1 Part 42876 Dark Orange Turkey Drumstick, 22mm with Oval Opening on Back (Alternate) (match ID 1)
* Add 2 Part 34337 Light Bluish Gray Wheel 8mm D. x 6mm with Slot (Alternate) (match ID 2)
* Change 1 Part Dark Orange 33057 Turkey Drumstick, 20mm with Round Opening on Back {match ID 0 to 1}
* Change 2 Part Light Bluish Gray 4624 Wheel 8mm D. x 6mm {match ID 0 to 2}
Comments from Submitter:
found variants during part out, thanks
|
We were unaware of both of these newer variants when I inventoried the set and
I didn't keep any pieces. I would support just replacing them, as it is
likely they were always the newer ones. If someone finds the old ones we could
always add them back.
|
I would have said so as well, but I actually found both variants of each part
during the part out process.
|
Oh.. I mean, yeah, I was totally in control the whole time.
|
|
| Author: | Brixalotl | | Posted: | May 22, 2020 22:02 | | Subject: | Re: Inventory Change Request for Set 75928-1 | | Viewed: | 18 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, axaday writes:
| | In Inventories Requests, Brixalotl writes:
| | Please make changes to the following inventory:
* Add 1 Part 42876 Dark Orange Turkey Drumstick, 22mm with Oval Opening on Back (Alternate) (match ID 1)
* Add 2 Part 34337 Light Bluish Gray Wheel 8mm D. x 6mm with Slot (Alternate) (match ID 2)
* Change 1 Part Dark Orange 33057 Turkey Drumstick, 20mm with Round Opening on Back {match ID 0 to 1}
* Change 2 Part Light Bluish Gray 4624 Wheel 8mm D. x 6mm {match ID 0 to 2}
Comments from Submitter:
found variants during part out, thanks
|
We were unaware of both of these newer variants when I inventoried the set and
I didn't keep any pieces. I would support just replacing them, as it is
likely they were always the newer ones. If someone finds the old ones we could
always add them back.
|
I would have said so as well, but I actually found both variants of each part
during the part out process.
|
|
| Author: | cptnruthless | | Posted: | May 22, 2020 19:34 | | Subject: | Inventory Change Request for Set 60177-1 | | Viewed: | 32 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 6239pb086R Dark Blue Tail Shuttle with Red Lightning on Dark Blue Background Pattern Model Right Side (Sticker) - Set 60177 (Counterpart)
|
|
| Author: | axaday | | Posted: | May 22, 2020 19:25 | | Subject: | Re: Inventory Change Request for Set 75928-1 | | Viewed: | 18 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, Brixalotl writes:
| | Please make changes to the following inventory:
* Add 1 Part 42876 Dark Orange Turkey Drumstick, 22mm with Oval Opening on Back (Alternate) (match ID 1)
* Add 2 Part 34337 Light Bluish Gray Wheel 8mm D. x 6mm with Slot (Alternate) (match ID 2)
* Change 1 Part Dark Orange 33057 Turkey Drumstick, 20mm with Round Opening on Back {match ID 0 to 1}
* Change 2 Part Light Bluish Gray 4624 Wheel 8mm D. x 6mm {match ID 0 to 2}
Comments from Submitter:
found variants during part out, thanks
|
We were unaware of both of these newer variants when I inventoried the set and
I didn't keep any pieces. I would support just replacing them, as it is
likely they were always the newer ones. If someone finds the old ones we could
always add them back.
|
|
| Author: | cptnruthless | | Posted: | May 22, 2020 19:17 | | Subject: | Inventory Change Request for Set 60177-1 | | Viewed: | 19 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 6239pb086L Dark Blue Tail Shuttle with Red Lightning on Dark Blue Background Pattern Model Left Side (Sticker) - Set 60177 (Counterpart)
|
|
| Author: | Brixalotl | | Posted: | May 22, 2020 19:16 | | Subject: | Inventory Change Request for Set 75928-1 | | Viewed: | 22 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 42876 Dark Orange Turkey Drumstick, 22mm with Oval Opening on Back (Alternate) (match ID 1)
* Add 2 Part 34337 Light Bluish Gray Wheel 8mm D. x 6mm with Slot (Alternate) (match ID 2)
* Change 1 Part Dark Orange 33057 Turkey Drumstick, 20mm with Round Opening on Back {match ID 0 to 1}
* Change 2 Part Light Bluish Gray 4624 Wheel 8mm D. x 6mm {match ID 0 to 2}
Comments from Submitter:
found variants during part out, thanks
|
|
| Author: | cptnruthless | | Posted: | May 22, 2020 19:16 | | Subject: | Inventory Change Request for Set 70631-1 | | Viewed: | 17 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 3068bpb1328 White Tile 2 x 2 with Groove with Red 'GIT' and 'AUTHORIZED ACCESS ONLY' Pattern (Sticker) - Set 70631 (Counterpart)
|
|
| Author: | normann1974 | | Posted: | May 22, 2020 18:52 | | Subject: | Inventory Change Request for Set 622-1 | | Viewed: | 26 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part BA140pb01 (Not Applicable) Stickered Assembly 10 x 4 x 1 with Black and Yellow Danger Stripes Pattern (Sticker) - Set 622 - 2 Black Plate 2 x 10, 1 Black Plate 2 x 2, 1 Yellow Plate 2 x 4, 1 Yellow Vehicle, Mudguard 2 x (Counterpart)
|
| Author: | Louloutte | | Posted: | May 22, 2020 18:38 | | Subject: | studio trans neon green dissapear | | Viewed: | 60 times | | Topic: | Catalog | | Status: | Open | |
|
| studio trans neon green dissapear !
whaaaaaaaaaaaat??? why this color dissapear ?
|
|
| Author: | iprice | | Posted: | May 22, 2020 18:14 | | Subject: | Re: Catalog Weight of Sets - With/Without Boxes? | | Viewed: | 21 times | | Topic: | Catalog | |
|
| In Catalog, StormChaser writes:
| | In Catalog, iprice writes:
| | When looking at sets in the catalog the item info includes weight. Is this weight
of the model alone, once constructed or the full and complete set including packaging
and instructions?
Eg for the UCS B-Wing - Weight is stated as 2796g. What does this refer to exactly?
|
These weights are intended to refer to a factory-sealed set. The weight includes
the outer packaging (meaning the box) and all contents therein.
If you click on the Instructions Entry tab for that set, you'll see that
the three instructions booklets combined weigh 337 grams. The empty box itself
is reported to weigh 576 grams (although I wonder a bit about that weight).
|
Many thanks for your reply.
BTW I just picked that set because it was one of my fave SW ships/sets 
|
|
| Author: | Stellar | | Posted: | May 22, 2020 16:49 | | Subject: | Re: High to low price? | | Viewed: | 49 times | | Topic: | Suggestions | |
|
| In Suggestions, BulbaNerd4000 writes:
| | I think that when going to a category such as Minifigures, parts, or sets there
should be an option to sort from highest to lowest price and vice versa. A benefit
of this would be if I wanted, say, a Ninjago villain because all I have are ninja,
but I don’t want to pay a lot, I could just sort the entire Ninjago minifigure
category from lowest to highest price and select the first cool villain I find,
which is obviously the cheapest because of how it would be sorted. It would make
it a lot easier than searching through a bunch of characters and writing down
all the prices. I have added a picture of where this should go in the catalogue.
I hope you consider my suggestion.
|
Try the Advanced search for this: https://www.bricklink.com/searchAdvanced.asp
You can access it clicking the magnifying glass icon next to the top search button.
|
|
| Author: | StormChaser | | Posted: | May 22, 2020 16:48 | | Subject: | Re: Catalog Weight of Sets - With/Without Boxes? | | Viewed: | 22 times | | Topic: | Catalog | |
|
| In Catalog, iprice writes:
| | When looking at sets in the catalog the item info includes weight. Is this weight
of the model alone, once constructed or the full and complete set including packaging
and instructions?
Eg for the UCS B-Wing - Weight is stated as 2796g. What does this refer to exactly?
|
These weights are intended to refer to a factory-sealed set. The weight includes
the outer packaging (meaning the box) and all contents therein.
If you click on the Instructions Entry tab for that set, you'll see that
the three instructions booklets combined weigh 337 grams. The empty box itself
is reported to weigh 576 grams (although I wonder a bit about that weight).
|
|
| Author: | BulbaNerd4000 | | Posted: | May 22, 2020 16:46 | | Subject: | High to low price? | | Viewed: | 84 times | | Topic: | Suggestions | | Status: | Open | | Vote: | [Yes|No] | |
|
| I think that when going to a category such as Minifigures, parts, or sets there
should be an option to sort from highest to lowest price and vice versa. A benefit
of this would be if I wanted, say, a Ninjago villain because all I have are ninja,
but I don’t want to pay a lot, I could just sort the entire Ninjago minifigure
category from lowest to highest price and select the first cool villain I find,
which is obviously the cheapest because of how it would be sorted. It would make
it a lot easier than searching through a bunch of characters and writing down
all the prices. I have added a picture of where this should go in the catalogue.
I hope you consider my suggestion.
|
|
|
| Author: | iprice | | Posted: | May 22, 2020 16:37 | | Subject: | Catalog Weight of Sets - With/Without Boxes? | | Viewed: | 45 times | | Topic: | Catalog | | Status: | Open | |
|
| When looking at sets in the catalog the item info includes weight. Is this weight
of the model alone, once constructed or the full and complete set including packaging
and instructions?
Eg for the UCS B-Wing - Weight is stated as 2796g. What does this refer to exactly?
Cheers
BTW - I did do a quick search before asking this, but was overwhelmed with info
that had nothing to do with this question!
|
|
| Author: | Miro78 | | Posted: | May 22, 2020 13:40 | | Subject: | Re: Is dual color mold really decorated? | | Viewed: | 24 times | | Topic: | Catalog | |
|
| In Catalog, StormChaser writes:
| | In Catalog, Miro78 writes:
| | This should had been addressed when these parts started to appear first back
in 2014. Problem with many images is that it's hard to tell if they are MCM
or SCM, especially with the digital images replacing actual images. That being
said, this needs to happen sooner than later. It's an important classification
that affects those that need to know or care.
|
I've added this to the roadmap because there is more involved here than just
identifying and retitling MCM parts. It's the most recent project added
(end of the list):
https://www.bricklink.com/help.asp?helpID=2476
Our goal is to get through one project every month. This is not an overly complicated
project, so hopefully it will happen relatively soon. I would suggest this to
anyone reading: begin working on compiling a list of MCM parts so that when we
begin the project we can breeze through it quickly.
|
Thank you for adding this to the roadmap. It will be a great asset in the catalogue
and sounds the like MCM acronym is sticking. As some of the parts get identified,
I imagine some entries will need to be changed to "a" and "b" during the transition
that happened in 2014, like the Friends legs that I identified. I also see the
dark blue legs with tan and dark shoes has probably more to do with the original
intent being tan, which looks tan with MCM, but look dark tan when tan color
is applied to dark blue mold, as you can see in my photo here: https://www.bricklink.com/message.asp?ID=851619
with printed color
with MCM
Miro
|
|
| Author: | eskeleto532 | | Posted: | May 22, 2020 13:20 | | Subject: | Inventory Change Request for Set 8557-1 | | Viewed: | 18 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change {25 to 23} Part Black 43093 Technic, Axle Pin with Friction Ridges Lengthwise
* Change {5 to 2} Part Light Gray 4265c Technic, Bush 1/2 Smooth
* Change {3 to 1} Part Black 3706 Technic, Axle 6
Comments from Submitter:
I checked with the official model and checked the parts used in the instructions and these parts have different quantities than the ones specified in the inventory
|
|
| Author: | StormChaser | | Posted: | May 22, 2020 13:20 | | Subject: | Re: Is dual color mold really decorated? | | Viewed: | 18 times | | Topic: | Catalog | |
|
| In Catalog, hpoort writes:
We haven't forgotten those. They're the main reason why that project
in progress is still in progress. We're just focusing more on the other
two in-progress projects at the moment. They'll all three be finished before
the end of this year (and hopefully, for the project you mention, within the
next three months or so).
|
|
| Author: | the.reminder | | Posted: | May 22, 2020 13:11 | | Subject: | Re: Inventory Change Request for Set 10159-2 | | Viewed: | 16 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, mihau writes:
| | Please make changes to the following inventory:
* Delete 1 Part 3001 White Brick 2 x 4
Comments from Submitter:
I have this set, and I was counting pieces in order to verify completeness. However I have not found a place to use 2x4 white brick in the building instructions. Maybe it appears as extra part.
|
I thought i was going crazy I was at the same point as you like ehhhhhhhhhh
mystery solved
|
|
| Author: | hpoort | | Posted: | May 22, 2020 13:00 | | Subject: | Re: Is dual color mold really decorated? | | Viewed: | 16 times | | Topic: | Catalog | |
|
| In Catalog, StormChaser writes:
| | In Catalog, Miro78 writes:
| | This should had been addressed when these parts started to appear first back
in 2014. Problem with many images is that it's hard to tell if they are MCM
or SCM, especially with the digital images replacing actual images. That being
said, this needs to happen sooner than later. It's an important classification
that affects those that need to know or care.
|
I've added this to the roadmap because there is more involved here than just
identifying and retitling MCM parts. It's the most recent project added
(end of the list):
https://www.bricklink.com/help.asp?helpID=2476
Our goal is to get through one project every month. This is not an overly complicated
project, so hopefully it will happen relatively soon. I would suggest this to
anyone reading: begin working on compiling a list of MCM parts so that when we
begin the project we can breeze through it quickly.
|
Don't forget about the choice of which of the colors is variable and which
is fixed. See https://www.bricklink.com/messageThread.asp?ID=267557 that I brought
up two weeks ago. There is more to it than just the item descriptions.
|
|
| Author: | StormChaser | | Posted: | May 22, 2020 12:11 | | Subject: | Re: Is dual color mold really decorated? | | Viewed: | 21 times | | Topic: | Catalog | |
|
| In Catalog, Miro78 writes:
| | This should had been addressed when these parts started to appear first back
in 2014. Problem with many images is that it's hard to tell if they are MCM
or SCM, especially with the digital images replacing actual images. That being
said, this needs to happen sooner than later. It's an important classification
that affects those that need to know or care.
|
I've added this to the roadmap because there is more involved here than just
identifying and retitling MCM parts. It's the most recent project added
(end of the list):
https://www.bricklink.com/help.asp?helpID=2476
Our goal is to get through one project every month. This is not an overly complicated
project, so hopefully it will happen relatively soon. I would suggest this to
anyone reading: begin working on compiling a list of MCM parts so that when we
begin the project we can breeze through it quickly.
|
|
| Author: | Miro78 | | Posted: | May 22, 2020 11:42 | | Subject: | Re: Is dual color mold really decorated? | | Viewed: | 27 times | | Topic: | Catalog | |
|
| In Catalog, BricksThatStick writes:
| | In Catalog, Miro78 writes:
| | In Catalog, StormChaser writes:
| | In Catalog, Stellar writes:
| | I would like to see dual-molded parts differentiated too, maybe a new suffix
needs to be created... Maybe Stormchaser has already thought about some options?
|
I would say it needs to be something in the titles, not in the part number.
We would need something very short because torso assemblies where some parts
occur already have crammed titles. So a code, of sorts, like BAM. It will need
to be something not used in any other part titles or numbers.
Having all that in mind, what do you think about adding the letters DMO
(standing for Dual MOlded) to the titles of dual-molded parts?
This would include those parts that come in similar printed/molded patterns
that are not currently distinguished with separate catalog entries.
This will allow two things: finding all dual molded parts in the catalog by search
and excluding dual molded parts from searches.
|
Anything to distinguish the Dual MOlded (DMO) from Non-Dual Molded would help.
Although I am not sure people would know what DMO stands for outside of this
thread. I understand the need for a unique acronym.
DCM could be another acronym for Dual Color Mold if you want a 3 letter acronym,
since the O in DMO is not that fitting. This way if they ever do a Triple Color
Mold (TCM) you could distinguish it easily.
Miro
|
or MCM for Multi Color Mould to cover any future eventuality.
I changed them when I changed the legs and torsos around based on the theory
Robert mentioned up the thread but I'm glad it was brought up and is being
discussed
|
I like the MCM (Multi Color Mould) acronym. It future proofs things and certainly
distinguishes from SCM (Single Color Mould) parts. Thanks for the suggestion.
This should had been addressed when these parts started to appear first back
in 2014. Problem with many images is that it's hard to tell if they are MCM
or SCM, especially with the digital images replacing actual images. That being
said, this needs to happen sooner than later. It's an important classification
that affects those that need to know or care.
Miro
|
|
| Author: | Mirko8710 | | Posted: | May 22, 2020 09:37 | | Subject: | Inventory Change Request for Set 70402-1 | | Viewed: | 21 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 2 Part 2335pb109 Blue Flag 2 x 2 Square with Gold Crown on Blue and White Background Pattern (Sticker) - Set 70806 (Counterpart)
|
| Author: | Stellar | | Posted: | May 22, 2020 05:36 | | Subject: | Re: Is there a difference between 34987 and 24789 | | Viewed: | 42 times | | Topic: | Catalog | |
|
| In Catalog, Hygrotus writes:
| | In Catalog, gvbricks writes:
| | What is the difference between
[p=34987]
and
[p=24789]
?
|
Thanks for catching this
|
Maybe add that ID to the alternate?
|
|
| Author: | yorbrick | | Posted: | May 22, 2020 05:36 | | Subject: | Re: Is dual color mold really decorated? | | Viewed: | 26 times | | Topic: | Catalog | |
|
| | | I think we should decide a term that fits more than Dual moulded too, so MCM
is a good option. But we never know if in the future Lego might do hundreds of
dual and triple and future selfs would like to distinguish them 
But as things are, this is not likely the case haha
|
Yes, multi-color molded is probably a good idea rather than dual. If for example
there is a piece with A-B-A colouring (like Bart Simpson legs) is that dual or
triple molding? It might be triple molded but dual colored.
|
|
| Author: | Stellar | | Posted: | May 22, 2020 05:30 | | Subject: | Re: Is dual color mold really decorated? | | Viewed: | 23 times | | Topic: | Catalog | |
|
| In Catalog, BricksThatStick writes:
| | In Catalog, Miro78 writes:
| | In Catalog, StormChaser writes:
| | In Catalog, Stellar writes:
| | I would like to see dual-molded parts differentiated too, maybe a new suffix
needs to be created... Maybe Stormchaser has already thought about some options?
|
I would say it needs to be something in the titles, not in the part number.
We would need something very short because torso assemblies where some parts
occur already have crammed titles. So a code, of sorts, like BAM. It will need
to be something not used in any other part titles or numbers.
Having all that in mind, what do you think about adding the letters DMO
(standing for Dual MOlded) to the titles of dual-molded parts?
This would include those parts that come in similar printed/molded patterns
that are not currently distinguished with separate catalog entries.
This will allow two things: finding all dual molded parts in the catalog by search
and excluding dual molded parts from searches.
|
Anything to distinguish the Dual MOlded (DMO) from Non-Dual Molded would help.
Although I am not sure people would know what DMO stands for outside of this
thread. I understand the need for a unique acronym.
DCM could be another acronym for Dual Color Mold if you want a 3 letter acronym,
since the O in DMO is not that fitting. This way if they ever do a Triple Color
Mold (TCM) you could distinguish it easily.
Miro
|
or MCM for Multi Color Mould to cover any future eventuality.
I changed them when I changed the legs and torsos around based on the theory
Robert mentioned up the thread but I'm glad it was brought up and is being
discussed
|
I think we should decide a term that fits more than Dual moulded too, so MCM
is a good option. But we never know if in the future Lego might do hundreds of
dual and triple and future selfs would like to distinguish them
But as things are, this is not likely the case haha
|
|
| Author: | Hygrotus | | Posted: | May 22, 2020 04:11 | | Subject: | Re: Is there a difference between 34987 and 24789 | | Viewed: | 57 times | | Topic: | Catalog | |
|
| In Catalog, gvbricks writes:
| | What is the difference between
[p=34987]
and
[p=24789]
?
|
Thanks for catching this
|
| Author: | gvbricks | | Posted: | May 22, 2020 04:06 | | Subject: | Is there a difference between 34987 and 24789 | | Viewed: | 97 times | | Topic: | Catalog | | Status: | Open | |
|
| What is the difference between
[p=34987]
and
[p=24789]
?
|
| Author: | SylvainLS | | Posted: | May 21, 2020 21:11 | | Subject: | Re: Have Quantity in Wanted List | | Viewed: | 27 times | | Topic: | Inventories | |
|
| In Inventories, clohr writes:
| | Hi!
I have uploaded a parts inventory to "Wanted List" using the "Have Quantity"
field, I want to export this information, but it is not possible because downloading
does not rescue the information in that field.
How can I export this information??
|
It’s in the “QTYFILLED” element in the XML.
(“Want” is in “MINQTY”.)
It works both for download and upload.
|
|
| Author: | axaday | | Posted: | May 21, 2020 21:07 | | Subject: | Re: Inventory Change Request for Set 4562-1 | | Viewed: | 24 times | | Topic: | Inventories Requests | |
|
| This is the only useful pic I could find among my reference pics. You can't
count them, but you can definitely tell that there are more than 6 each of the
blue and red 3003.
In Inventories Requests, axaday writes:
| | Please make changes to the following inventory:
* Add 8 Part 3003 Blue Brick 2 x 2 (Alternate) (match ID 1)
* Add 8 Part 3003 Red Brick 2 x 2 (Alternate) (match ID 2)
* Add 2 Part 41855 Blue Brick, Modified 2 x 2 x 2/3 Two Studs, Lip End (Alternate) (match ID 3)
* Change 8 Part Trans-Dark Blue 3003 Brick 2 x 2 {match ID 0 to 1}
* Change 8 Part Trans-Red 3003 Brick 2 x 2 {match ID 0 to 2}
* Change 2 Part Trans-Red 3039 Slope 45 2 x 2 {match ID 0 to 3}
Comments from Submitter:
I have deleted my previous requests on this set and am doing it a different way.
- On the blue and red bricks, this variance is what I have found when I parted out two sets before and again when I parted out 1 yesterday.
- I was missing the trans-red slopes before and again and last time I didn't know what to balance them with, but this time the blue 41855 (and maybe/probably last time as well, I don't know) were in the bag with the regular parts, not the floor sweepings, so I think they alternate each other.
-I will also record here that when I parted out two sets before, I only got 2 yellow 3005pe1, not 4 and this time when I parted out one set I didn't get any of them. I suspect that this piece belongs in the extras, but I have no handy proof. I am making these requests from work and it now occurs to me that I may have pictures of the unopened bags last time that would shed some light on this. I will check later.
|
|
|
|
| Author: | clohr | | Posted: | May 21, 2020 20:20 | | Subject: | Have Quantity in Wanted List | | Viewed: | 30 times | | Topic: | Inventories | | Status: | Open | |
|
| Hi!
I have uploaded a parts inventory to "Wanted List" using the "Have Quantity"
field, I want to export this information, but it is not possible because downloading
does not rescue the information in that field.
How can I export this information??
thanks!!!
Cristóbal
|
|
| Author: | Bricksonbricks7 | | Posted: | May 21, 2020 18:45 | | Subject: | Re: Stickers: Space Shuttle Discovery (7470) | | Viewed: | 33 times | | Topic: | Catalog | |
|
| In Catalog, BricksThatStick writes:
| | In Catalog, Bricksonbricks7 writes:
| | In Catalog, SylvainLS writes:
| |
In Suggestions, Bricksonbricks7 writes:
| | I was wondering, how can I go about finding the parts with the stickers? it looks
like some of the stickers are placed over multiple parts
|
They are in the inventory in the Counterparts section, no?
|
Only 4 of them are! For example, the one that says United States is not there!
|
That could be added to the sticker over assembly category of the catalog:
https://www.bricklink.com/catalogList.asp?catType=P&catString=582
But it would involve someone carefully removing the bricks together with the
sticker attached and taking a picture to get it approved.
Until someone does that you may not find it for sale unless someone lists it
as a custom item in their store.
|
Woah that's super wild! I have one at hand but I'm missing most of the
stickers for it! I was trying to piece it back together but I see that I might
be better to just not do it haha
|
|
| Author: | BricksThatStick | | Posted: | May 21, 2020 18:36 | | Subject: | Re: Stickers: Space Shuttle Discovery (7470) | | Viewed: | 21 times | | Topic: | Catalog | |
|
| In Catalog, Bricksonbricks7 writes:
| | In Catalog, SylvainLS writes:
| |
In Suggestions, Bricksonbricks7 writes:
| | I was wondering, how can I go about finding the parts with the stickers? it looks
like some of the stickers are placed over multiple parts
|
They are in the inventory in the Counterparts section, no?
|
Only 4 of them are! For example, the one that says United States is not there!
|
That could be added to the sticker over assembly category of the catalog:
https://www.bricklink.com/catalogList.asp?catType=P&catString=582
But it would involve someone carefully removing the bricks together with the
sticker attached and taking a picture to get it approved.
Until someone does that you may not find it for sale unless someone lists it
as a custom item in their store.
|
|
| Author: | Bricksonbricks7 | | Posted: | May 21, 2020 18:12 | | Subject: | Re: Stickers: Space Shuttle Discovery (7470) | | Viewed: | 27 times | | Topic: | Catalog | |
|
| In Catalog, SylvainLS writes:
| |
In Suggestions, Bricksonbricks7 writes:
| | I was wondering, how can I go about finding the parts with the stickers? it looks
like some of the stickers are placed over multiple parts
|
They are in the inventory in the Counterparts section, no?
|
Only 4 of them are! For example, the one that says United States is not there!
|
|
| Author: | SylvainLS | | Posted: | May 21, 2020 18:08 | | Subject: | Re: Stickers: Space Shuttle Discovery (7470) | | Viewed: | 23 times | | Topic: | Catalog | |
|
|
In Suggestions, Bricksonbricks7 writes:
| | I was wondering, how can I go about finding the parts with the stickers? it looks
like some of the stickers are placed over multiple parts
|
They are in the inventory in the Counterparts section, no?
|
| Author: | Bricksonbricks7 | | Posted: | May 21, 2020 17:56 | | Subject: | Stickers: Space Shuttle Discovery (7470) | | Viewed: | 63 times | | Topic: | Catalog | | Status: | Open | |
|
| I was wondering, how can I go about finding the parts with the stickers? it looks
like some of the stickers are placed over multiple parts
|
|
| Author: | BricksThatStick | | Posted: | May 21, 2020 17:47 | | Subject: | Re: Is dual color mold really decorated? | | Viewed: | 73 times | | Topic: | Catalog | |
|
| In Catalog, Miro78 writes:
| | In Catalog, StormChaser writes:
| | In Catalog, Stellar writes:
| | I would like to see dual-molded parts differentiated too, maybe a new suffix
needs to be created... Maybe Stormchaser has already thought about some options?
|
I would say it needs to be something in the titles, not in the part number.
We would need something very short because torso assemblies where some parts
occur already have crammed titles. So a code, of sorts, like BAM. It will need
to be something not used in any other part titles or numbers.
Having all that in mind, what do you think about adding the letters DMO
(standing for Dual MOlded) to the titles of dual-molded parts?
This would include those parts that come in similar printed/molded patterns
that are not currently distinguished with separate catalog entries.
This will allow two things: finding all dual molded parts in the catalog by search
and excluding dual molded parts from searches.
|
Anything to distinguish the Dual MOlded (DMO) from Non-Dual Molded would help.
Although I am not sure people would know what DMO stands for outside of this
thread. I understand the need for a unique acronym.
DCM could be another acronym for Dual Color Mold if you want a 3 letter acronym,
since the O in DMO is not that fitting. This way if they ever do a Triple Color
Mold (TCM) you could distinguish it easily.
Miro
|
or MCM for Multi Color Mould to cover any future eventuality.
I changed them when I changed the legs and torsos around based on the theory
Robert mentioned up the thread but I'm glad it was brought up and is being
discussed
|
|
| Author: | Miro78 | | Posted: | May 21, 2020 17:37 | | Subject: | Re: Is dual color mold really decorated? | | Viewed: | 31 times | | Topic: | Catalog | |
|
| In Catalog, StormChaser writes:
| | In Catalog, Stellar writes:
| | I would like to see dual-molded parts differentiated too, maybe a new suffix
needs to be created... Maybe Stormchaser has already thought about some options?
|
I would say it needs to be something in the titles, not in the part number.
We would need something very short because torso assemblies where some parts
occur already have crammed titles. So a code, of sorts, like BAM. It will need
to be something not used in any other part titles or numbers.
Having all that in mind, what do you think about adding the letters DMO
(standing for Dual MOlded) to the titles of dual-molded parts?
This would include those parts that come in similar printed/molded patterns
that are not currently distinguished with separate catalog entries.
This will allow two things: finding all dual molded parts in the catalog by search
and excluding dual molded parts from searches.
|
Anything to distinguish the Dual MOlded (DMO) from Non-Dual Molded would help.
Although I am not sure people would know what DMO stands for outside of this
thread. I understand the need for a unique acronym.
DCM could be another acronym for Dual Color Mold if you want a 3 letter acronym,
since the O in DMO is not that fitting. This way if they ever do a Triple Color
Mold (TCM) you could distinguish it easily.
Miro
|
|
|
| Author: | StormChaser | | Posted: | May 21, 2020 16:54 | | Subject: | Re: Is dual color mold really decorated? | | Viewed: | 29 times | | Topic: | Catalog | |
|
| In Catalog, Stellar writes:
| | I would like to see dual-molded parts differentiated too, maybe a new suffix
needs to be created... Maybe Stormchaser has already thought about some options?
|
I would say it needs to be something in the titles, not in the part number.
We would need something very short because torso assemblies where some parts
occur already have crammed titles. So a code, of sorts, like BAM. It will need
to be something not used in any other part titles or numbers.
Having all that in mind, what do you think about adding the letters DMO
(standing for Dual MOlded) to the titles of dual-molded parts?
This would include those parts that come in similar printed/molded patterns
that are not currently distinguished with separate catalog entries.
This will allow two things: finding all dual molded parts in the catalog by search
and excluding dual molded parts from searches.
|
|
| Author: | randyf | | Posted: | May 21, 2020 16:48 | | Subject: | Re: Is dual color mold really decorated? | | Viewed: | 32 times | | Topic: | Catalog | |
|
| In Catalog, axaday writes:
| | In Catalog, Miro78 writes:
| | Should dual molded legs or arms in their respective assemblies really be considered
as decorated?
To me BL considered the decorated as by means of printing or applying decoration
using stickers.
example
the reasoning is, how is that any different from legs assembly with single color
legs but different color hips or mismatched leg colors?
I feel the same way about dual molded arms
There are reasons for not separating them, mainly for new buyers not knowing
or caring about the difference or just the general way of looking at it, but
I feel like there is no real definition for the term decorated that should be
defined. As far I am concerned, dual color molding is not really decorating.
Any thoughts?
Miro
|
I support the change. Also the pics you posted are lovely.
|
LOL 
|
|
| Author: | randyf | | Posted: | May 21, 2020 16:39 | | Subject: | Re: Inventory Change Request for Set 3723-1 | | Viewed: | 24 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, dromeracer writes:
| | In Inventories Requests, dromeracer writes:
| | In Inventories Requests, Turez writes:
| | In Inventories Requests, dromeracer writes:
| | my own item of this type.
|
By the way, does that mean you have an original copy of this set (i.e. you got
the set new and never mixed it with other parts)? If yes, could you check if
the parts
are the "c" type?
[p=32064c,3]
|
Yes, I have this item in original condition and never mixed with other items.
I will look regarding this Question and give you a Feedback today in the evening.
I forgot that there are two ways to attach the arms. I think the parts are still
in my original box for the set.
|
Hey I would Like to confirm: Ist ist the C-Type!
|
Could you please submit an inventory change request for this? That way, you get
credit for the change. If you would rather that I do it, just let me know.
Cheers,
Randy
|
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|
Italy, Toscana
Canada, British Columbia
USA, Ohio
Belgium, Limburg
)
)
Denmark
France, Nouvelle-Aquitaine
United Kingdom, England
Spain, Comunidad Valenciana
Portugal
Netherlands, Groningen
Poland, w. Wielkopolskie
Germany, Nordrhein-Westfalen
Chile, Metropolitana de Santiago
