Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies Author: | Ladyandabrick | Posted: | Jun 22, 2022 17:55 | Subject: | Re: Packaging Dimensions 3068* | Viewed: | 29 times | Topic: | Packing Dimensions X | |
|
| Thanks All
We have two shipping options:
Carrier and Australia Post Large Letter.
Carrier: Dimensions do not matter as all goes through the checkout.
Australia Post Large Letter: is governed by the height dimensions
and limited to 1.5cm up to 90grams. As height dimensions where
originally set by the Z = Height, there were no problems at the
checkout. We have had a number of visitors stating they can not
access the Large Letter option at the instant checkout, when
trying to order 6 small items. I would like to verify what the
height should be for instant checkout Large Letter?
|
|
Author: | jbroman | Posted: | Jun 22, 2022 04:06 | Subject: | Re: Packaging Dimensions 3068* | Viewed: | 33 times | Topic: | Packing Dimensions X | |
|
| In Packing Dimensions X, Ladyandabrick writes:
| Hi All
Just checking the Height Dimensions for the shopping cart on 3068*
Please confirm if Y = Height ?
See Image note item 3068bpb0674 DimY= 0.32cm if correct should
pass through, however the majority are DimY = 1.6cm
|
From the help page https://www.bricklink.com/help.asp?helpID=2510&q=Dimensions+
DimX = Depth – the shortest of the two primary dimensions
DimY = Width – the longest of the two primary dimensions
DimZ = Height – the vertical dimension
I’ve seen DimY and DimZ interchanged many times.
|
|
Author: | Stellar | Posted: | Jun 22, 2022 04:05 | Subject: | Re: Packaging Dimensions 3068* | Viewed: | 31 times | Topic: | Packing Dimensions X | |
|
| In Packing Dimensions X, Ladyandabrick writes:
| Hi All
Just checking the Height Dimensions for the shopping cart on 3068*
Please confirm if Y = Height ?
See Image note item 3068bpb0674 DimY= 0.32cm if correct should
pass through, however the majority are DimY = 1.6cm
|
Here it explains it all:
https://www.bricklink.com/help.asp?helpID=2510&q=packaging#Parts
There is an ideal order yes, but I think that the system rotates the parts to
fit, so if they are correct in total but in wrong order it should still work.
Here you can submit changes to put them correctly:
https://www.bricklink.com/catalogReq.asp?itemType=P
It is under Market - Add or Change - Change item - Part
|
|
Author: | Ladyandabrick | Posted: | Jun 21, 2022 21:06 | Subject: | Packaging Dimensions 3068* | Viewed: | 73 times | Topic: | Packing Dimensions X | |
|
| Hi All
Just checking the Height Dimensions for the shopping cart on 3068*
Please confirm if Y = Height ?
See Image note item 3068bpb0674 DimY= 0.32cm if correct should
pass through, however the majority are DimY = 1.6cm
|
|
|
Author: | randyf | Posted: | Jun 19, 2022 22:42 | Subject: | Re: Packaging Dimensions Shopping Cart Height | Viewed: | 23 times | Topic: | Packing Dimensions X | |
|
| In Packing Dimensions X, randyf writes:
| In Packing Dimensions X, Ladyandabrick writes:
| Thanks 😊,
Will all minifigures be updated with the new dimensions
and is there a timeframe to get this done?
|
Yes, all minifigures are being updated with dimensions. The timeframe is dependent
on how fast volunteers fill out the catalog with minifigure dimensions. Right
now, there are only 2,938 minifigures left without dimensions out of a current
14,350 minifigures in the catalog. So approximately 80% have been completed.
You can help fill out the remaining part of the catalog by measuring any of the
2,938 minifigures that haven't received dimensions yet and submitting them
using this form:
https://www.bricklink.com/catalogReq.asp?itemType=M
In this way, you help everyone on the site instead of just your store.
Cheers,
Randy
|
Oops, forgot to post this.
The list of minifigures that do not have dimensions can be found here:
https://www.bricklink.com/catalogListOld.asp?v=3&packingDim=0
Cheers,
Randy
|
|
Author: | randyf | Posted: | Jun 19, 2022 22:39 | Subject: | Re: Packaging Dimensions Shopping Cart Height | Viewed: | 25 times | Topic: | Packing Dimensions X | |
|
| In Packing Dimensions X, Ladyandabrick writes:
| Thanks 😊,
Will all minifigures be updated with the new dimensions
and is there a timeframe to get this done?
|
Yes, all minifigures are being updated with dimensions. The timeframe is dependent
on how fast volunteers fill out the catalog with minifigure dimensions. Right
now, there are only 2,938 minifigures left without dimensions out of a current
14,350 minifigures in the catalog. So approximately 80% have been completed.
You can help fill out the remaining part of the catalog by measuring any of the
2,938 minifigures that haven't received dimensions yet and submitting them
using this form:
https://www.bricklink.com/catalogReq.asp?itemType=M
In this way, you help everyone on the site instead of just your store.
Cheers,
Randy
|
|
Author: | axaday | Posted: | Jun 19, 2022 22:34 | Subject: | Re: Packaging Dimensions Shopping Cart Height | Viewed: | 21 times | Topic: | Packing Dimensions X | |
|
| In Packing Dimensions X, Ladyandabrick writes:
| Thanks 😊,
Will all minifigures be updated with the new dimensions
and is there a timeframe to get this done?
minifigures, X is width, Y is height, and Z is depth
Or do we have to manually change all the dimensions.
Thanks You
|
I have done something near 10,000 of them. I am not done, but it is getting harder.
|
|
Author: | Ladyandabrick | Posted: | Jun 19, 2022 22:26 | Subject: | Re: Packaging Dimensions Shopping Cart Height | Viewed: | 31 times | Topic: | Packing Dimensions X | |
|
| Thanks 😊,
Will all minifigures be updated with the new dimensions
and is there a timeframe to get this done?
minifigures, X is width, Y is height, and Z is depth
Or do we have to manually change all the dimensions.
Thanks You
|
|
Author: | randyf | Posted: | Jun 19, 2022 20:57 | Subject: | Re: Packaging Dimensions Shopping Cart Height | Viewed: | 27 times | Topic: | Packing Dimensions X | |
|
| In Packing Dimensions X, joesecc writes:
| In Packing Dimensions X, Ladyandabrick writes:
| Hello There
With all the changes going ahead, can you please confirm which dimensions
are correct for the shopping cart in regards to height.
In the past Z = HEIGHT. Thus items processed well through large letter.
However visitors to bricklink are experiencing difficulties, they are not
able to proceed through the checkout with a variety of items that should
be suitable for large letter.
Do we need to manually change our dimensions, in particular for minifigs?
Please confirm what X = ? Y = ? Z = ?
Our store dimensions displayed in the shipping area for large letter
are as follows:- X = W : Y = H : Z = D see image attached
Images: Torso : Minifigure
Thank You 😊
|
Hi,
I have noticed that some of the minifigure packing dimensions are based on an
assembled figure (i.e. with hat/helmet on). This results in all three dimensions
being larger than 16mm.
Due to these dimensions instant checkout rejects the large letter option. However
if you send the minifure unassembled it often can easily fit into a large letter.
for example:
Has dimensions 26x43x17. which means that instant checkout rejects the large
letter option. (remove the hat and the item will now fit into a large letter
package.)
In this case the buyer had to select manual invoice and add a message asking
for the order to be sent as a large letter.
So the issue is should the packing dimensions for a minifigure be based on an
assembled or unassmbled figure?
|
For the BrickLink catalog, dimensions reflect the minifigure as assembled in
the catalog image. They also happen to be the dimensions used for the packing
calculation for minifigures. This was decided to be the standard by the site.
I am guessing this was because unassembled minifigure dimensions can be calculated
in numerous ways, but the assembled minifigure is usually one specific combination
of parts with one specific set of dimensions.
Cheers,
Randy
|
|
Author: | joesecc | Posted: | Jun 19, 2022 20:50 | Subject: | Re: Packaging Dimensions Shopping Cart Height | Viewed: | 20 times | Topic: | Packing Dimensions X | |
|
| In Packing Dimensions X, Ladyandabrick writes:
| Hello There
With all the changes going ahead, can you please confirm which dimensions
are correct for the shopping cart in regards to height.
In the past Z = HEIGHT. Thus items processed well through large letter.
However visitors to bricklink are experiencing difficulties, they are not
able to proceed through the checkout with a variety of items that should
be suitable for large letter.
Do we need to manually change our dimensions, in particular for minifigs?
Please confirm what X = ? Y = ? Z = ?
Our store dimensions displayed in the shipping area for large letter
are as follows:- X = W : Y = H : Z = D see image attached
Images: Torso : Minifigure
Thank You 😊
|
Hi,
I have noticed that some of the minifigure packing dimensions are based on an
assembled figure (i.e. with hat/helmet on). This results in all three dimensions
being larger than 16mm.
Due to these dimensions instant checkout rejects the large letter option. However
if you send the minifure unassembled it often can easily fit into a large letter.
for example:
Has dimensions 26x43x17. which means that instant checkout rejects the large
letter option. (remove the hat and the item will now fit into a large letter
package.)
In this case the buyer had to select manual invoice and add a message asking
for the order to be sent as a large letter.
So the issue is should the packing dimensions for a minifigure be based on an
assembled or unassmbled figure?
|
|
Author: | randyf | Posted: | Jun 19, 2022 20:30 | Subject: | Re: Packaging Dimensions Shopping Cart Height | Viewed: | 24 times | Topic: | Packing Dimensions X | |
|
| In Packing Dimensions X, Ladyandabrick writes:
| Do we need to manually change our dimensions, in particular for minifigs?
Please confirm what X = ? Y = ? Z = ?
|
For minifigures, X is width, Y is height, and Z is depth:
https://www.bricklink.com/help.asp?helpID=2510#Minifigures
Cheers,
Randy
|
|
Author: | Ladyandabrick | Posted: | Jun 19, 2022 20:00 | Subject: | Packaging Dimensions Shopping Cart Height | Viewed: | 45 times | Topic: | Packing Dimensions X | |
|
| Hello There
With all the changes going ahead, can you please confirm which dimensions
are correct for the shopping cart in regards to height.
In the past Z = HEIGHT. Thus items processed well through large letter.
However visitors to bricklink are experiencing difficulties, they are not
able to proceed through the checkout with a variety of items that should
be suitable for large letter.
Do we need to manually change our dimensions, in particular for minifigs?
Please confirm what X = ? Y = ? Z = ?
Our store dimensions displayed in the shipping area for large letter
are as follows:- X = W : Y = H : Z = D see image attached
Images: Torso : Minifigure
Thank You 😊
|
|
|
|
Author: | maxx3001 | Posted: | Jun 20, 2021 06:20 | Subject: | Re: How is packing dimensions for bb0120 ? | Viewed: | 42 times | Topic: | Packing Dimensions X | |
|
| In Packing Dimensions, cosmicray writes:
|
Should the packing dimensions reflect it rolled into a tube, or folded ?
Folding it detracts from it's play-ability.
USPS makes a triangular tube for Priority Mail, which is how I would guess it
could be mailed.
Nita Rae
|
A better question is: Who is packing dimensions for bbb0120 ?
|
|
Author: | cosmicray | Posted: | Jun 19, 2021 17:59 | Subject: | How is packing dimensions for bb0120 ? | Viewed: | 77 times | Topic: | Packing Dimensions X | |
|
|
Should the packing dimensions reflect it rolled into a tube, or folded ?
Folding it detracts from it's play-ability.
USPS makes a triangular tube for Priority Mail, which is how I would guess it
could be mailed.
Nita Rae
|
|