BrickLink Discussion Forum

In LEGO, axaday writes:

3183 Plate, Modified 1 x 4 with Tow Ball Socket (Undetermined Type)
Parts: Plate, Modified

I have this in a set and I want to determine it, but I'm a little lost.
It has the 4 slots, but I can't tell from the limited pics the long and short
socket. Can someone help?

The four I have are the same length but as one has two slots and the others 4,
I guess they are all “long.”
The length is a bit more than a stud: you can’t put a brick in front of the socket
and aligned on studs. (You can put a plate because the slots are high enough
for the tiny “bit more.”)

Oh, if you have

3730 Plate, Modified 2 x 2 with Tow Ball Socket, Short, 4 Slots
Parts: Plate, Modified

those are shorter, by around 1mm.

Author:

SylvainLS

Posted:

Oct 10, 2019 18:28

Subject:

Re: Brick Color

Viewed:

31 times

Topic:

In Colors, iprice writes:

[…]
I concur with the brownish looking older greys.

The light greys look yellow compared to lbg.

Yes. The “Bluish” aren’t bluish, they are really grey. They only appear bluer
than the old greys because those were actually yellowish. But they already had
a name and people were used to their names and tints, so the newer ones were
named “Bluish.”

Author:

SylvainLS

Posted:

Oct 10, 2019 15:35

Subject:

Re: Brick Color

Viewed:

42 times

Topic:

In Colors, linesbusy writes:

How do you tell the difference between Dark Grey and Dark Bluish Grey bricks?
I want to make sure I purchase ones that match what I already have.

Depends, what do you have?

If it’s post-2005, it’s DBG.
If it’s pre-2004, it’s DG.
In between, well, the Big Colour Shift happened in 2004 but LEGO used their stocks
for a while

You can also check the inventories of your sets. If both greys were used for
a set, it’s generally noted in the inventory (Alternates section).

Also some parts exist only, or are much more frequent, in one dark grey.

Author:

SylvainLS

Posted:

Oct 10, 2019 11:24

Subject:

Re: 49699 a Panel?!

Viewed:

41 times

Topic:

In Catalog, Turez writes:

In Catalog, Teup writes:

49699 Panel 1 x 6 x 4 1/3 with Window and 4 Pin Holes
Parts: Panel

I can't discover anything panel-ish about this part. I'd say it's
window, door, technic, other, vehicle, or pretty much anything except a panel...

What do you think it should be?

Since

30528 Arch 1 x 8 x 6 (Portal)
Parts: Arch

is an arch, 49699 should perhaps just be a slope

I don’t quite follow the logic here

Half an arch might be a slope but, surely, an arch + an inverted arch is not
a slope, it’s a cylinder!

At least it has something in common with

30180 Slope 45 10 x 2 x 2 Double
Parts: Slope

Okay but then it should be a Slope AND a Slope Inverted. And both Double. So
does that make it Quadruple or Double-Double?

We really need a catmin who is used to deep and rigorous classifications.
I don’t know, maybe an entomologist or something like that?

Author:

SylvainLS

Posted:

Oct 10, 2019 09:16

Subject:

Re: 49699 a Panel?!

Viewed:

62 times

Topic:

In Catalog, firestar246 writes:

In Catalog, Teup writes:

49699 Panel 1 x 6 x 4 1/3 with Window and 4 Pin Holes
Parts: Panel

I can't discover anything panel-ish about this part. I'd say it's
window, door, technic, other, vehicle, or pretty much anything except a panel...

What do you think it should be?

My first thought is technic or window frame

Well:

1. Window (or door) frame implies you could put a glass or panel (or door)
inside. That seems very unlikely with the technic holes in the way.

2. It’s been used in System (City) sets for now BUT it sure looks like a Technic
Brick, yet not really.
So Technic could do but not really “Technic Brick” and there are no similar parts
(that I know of) in the other Technic categories, that would mean it should fall
in the general “Technic” category, which is already overpopulated.

I’m not envying the catmins

Author:

SylvainLS

Posted:

Oct 8, 2019 14:17

Subject:

Re: How rare is a flat silver 2x4 brick?

Viewed:

83 times

Topic:

In Colors, mmookk61 writes:

[…]
It took me a while but I misunderstood the purpose of this post at first. I
had originally thought that it was to arrange a trade for a rare brick for possibly
another rare brick. You know, 3 or 4 messages to establish the trade. Then
the trade happening via bricklink Private messages because, why would anyone
one else be interested in the details of one person's trade?

However, as I stated, I was wrong. This thread was meant to be a long, rambling,
time consuming library of Australian slang and possibly insults(I don't truthfully
know as I don't have the Australian to American translator to hand).

Looks like Devil.R is not alone¹: they answer multiple times to the same messages
and they keep answering to themselves.

(¹That expression may have a figurative colloquial meaning, at least it has one
in French, but I’m not implying that. IOW, if you think I’m saying something
demeaming, honi soit qui mal y pense

)

That thread could be a bit more sufferable if other people² (whose answers trigger
my reading: I’m an optimist and always hope for something useful to be said)
would correctly cut the quotes, and eventually decide if they want to top-post
or bottom-post.

(²Regulars should lead by example.)

Shoot yeah! Let's make this thread a record breaker of waste. See you all
here again and soon and often

Someone’s waste is someone else’s treasure. Well, sometimes

Author:

SylvainLS

Posted:

Sep 12, 2019 19:26

Subject:

Re: Change time zone

Viewed:

38 times

Topic:

In Suggestions, hpoort writes:

In Suggestions, HallBricks writes:

It would be great if I could change the time zone on BrickLink. Maybe not the
most necessary feature, but it feels like it wouldn't be that difficult of
a thing to implement.

Have you ever thought about it's complexity?

Very simple: everything is stored in UTC and presented in a local/chosen TZ.

The UTC → local TZ conversion is done with a standard, well tested library.

There. The complexity is outsourced.

Besides, it’s just about presentation. Official times are those in the database,
on the server, in UTC.

See Tom Scott's YouTube
episode about implementing time zones in programming:

https://www.youtube.com/watch?v=-5wpm-gesOY

I stopped watching after he began talking about DST (“autumn in England”).

And that’s absurd. He talks about a programmer who:
1. doesn’t know what TZs are,
2. adds cases one by one instead of, finally, learning what’s it about,
3. and thus reinvents the wheel, spoke by spoke.

Yes, timezones are complex (and involve politics, therefore also totally insane)
and that’s why you don’t cobble up something in your garage.

Yes, timezones change frequently (remember, politics), but you just update the
TZ data the library uses.

One could do the same kind of video about 3D geometry or any other complex or
complicated but already well known feature.

Just showing a given UTC time in a chosen TZ should be easy peasy.

Author:

SylvainLS

Posted:

Sep 7, 2019 11:59

Subject:

Re: found wrong category

Viewed:

30 times

Topic:

In Catalog, Teup writes:

[…]
So if printed parts never even have a different category than their parent part,
why is it apparently needed that these parts are assigned a category manually? […]

There are lots of reasons why something isn’t automatized. The main ones are:
1. You have to realize it’s stupid work.
2. “You can automatize that?!” The users don’t even know they can ask for it
to be done.
3. And, of course, “there’s something else more urgent to do.”

You thought about it because you’re lazy (in a good way

) and you needed to
do the job yourself.

Author:

SylvainLS

Posted:

Sep 7, 2019 11:48

Subject:

Re: found wrong category

Viewed:

38 times

Topic:

In Catalog, Teup writes:

[…]
(or better: change the "legs assembly" category in "lower body" and move all
short legs, mermaid tails and ghost lower bodies there too) […]

Yes, please.

Author:

SylvainLS

Posted:

Aug 26, 2019 17:19

Subject:

Re: Do part numbers change?

Viewed:

26 times

Topic:

In Catalog, Teup writes:

[…]
€20 I spent on a programmer

That’s what, one pizza and a coke?

Author:

SylvainLS

Posted:

Aug 25, 2019 12:29

Subject:

Re: Excel

Viewed:

34 times

Topic:

In Inventories, BarbaraH writes:

[…]

It worked fine until point 7
Then I just got error messages.

=VLOOKUP(E3;"$Page2.$A$3.$B$217";2)that's my formula

Ah, okay, my fault: no quotes around the region.

And to get the correct values for the region, try this:
— start editing the cell by deleting the region,
— do not validate, just let the text cursor where the region will be,
— go to the page with the colour and select the area (the two columns with colours
IDs and names), the formula should now have the correct region,
— validate.

If that cell now has the correct value, then you can edit the formula again to
add the $ so you can use it in the other cells.

Author:

SylvainLS

Posted:

Aug 24, 2019 12:27

Subject:

Re: Excel

Viewed:

41 times

Topic:

In Inventories, BarbaraH writes:

[…]

Colours are only numbers though. So you’ll need to import the colour table (same
form) to cross the tables.

Okay, this is obviously beyond my skill set. Anyone like to show me, preferably
via screen shots, exactly how to do this. Please.

For the first part:

1. Download the set inventory as Tab-delimited (should give you a “S-NNN-1.txt”
file).

2. Open Excel, open the file from Excel (or drag and drop it), it should give
you an import dialog where you can tweek things (delimiters, how numbers are
read, locale…) but you shouldn’t have to change anything because the tab-delimited
file is pretty simple/default.

You should now have the inventory in a table.

If you want to get colour names instead (or rather, besides) their code, well,
my Excel is a bit rusty (I use LibreOffice now) but this should do it:

1. Download the colour table as Tab-delimited (should give you a “colors.txt”
file).

2. Open it from Excel like above.

Note that it should be possible to cross/match from an external file but I’m
not sure how, so we’ll do it in one file, the one we have the inventory in.

3. Select and copy the first two columns (others are not needed).

4. Go back to the inventory file.

5. Create a new page (it’s cleaner) and paste the colours names and IDs.

6. Add a column in the inventory for the colour names.

7. Use the VLOOKUP function for the first item: “=VLOOKUP( E3 ; region ; 2 )”.
“E3” should be the cell with the colour code for the first item (line 3). “region”
is the whole region with the colours in the second page (e.g. “$Page2.A3.B217”).
“2” is because we want the value in the 2nd column, the colour name.

8. Add a $ before every value in the region (e.g. if it was “$Page2.A3.B217”,
make it “$Page2.$A$3.$B$217”). That will block the values (they won’t change
when the formula is moved or copy-pasted or dragged.

9. Apply the formula all the way down, for all the items by dragging the bottom-right
handle.

Now all the items have the colour code and names.

Hope that’s clear and helping

Author:

SylvainLS

Posted:

Aug 24, 2019 10:18

Subject:

Re: Excel

Viewed:

41 times

Topic:

In Inventories, paulvdb writes:

In Inventories, BarbaraH writes:

Is there a way of downloading an inventory of a specific set as an Excel file?

The two file options in the download tab are not Excel

You can open the tab-delimited text file in Excel and save it as an Excel file.

Actually, you could also import the XML version but the tab-delimited file contains
the items current names

Colours are only numbers though. So you’ll need to import the colour table (same
form) to cross the tables.

Author:

SylvainLS

Posted:

Aug 21, 2019 16:56

Subject:

Re: Cardboard sleeves in inventories

Viewed:

53 times

Topic:

In Inventories, yorbrick writes:

[…]
It is probably a stupid question, but does BL have a test server where such changes
can be tried out without affecting how regular users use the site or allowing
regular users to snoop or interrupt the testing of ideas?

It seems crazy that any ideas that get tried out (that do affect regular users)
need to be made on the client facing server.

(Snide: BL doesn’t even have _one_ working website. )

There was a second website where users (mainly sellers) were encouraged to go
when BL2 was to come (the new skin, the new main page, the new WLs, etc.). It
had an older version of the database, with no impact on the actual database.
Some people went there, made bug reports and remarks, and then the update was
put in production as it was and the people who didn’t go to the second site were
angry because they hadn’t known and those who went were angry too because they
weren’t heard.
And then everybody was adverse to any change. Go figure.

Anyway, the “sleeves” changes are on the catalogue, the database, not the website,
its skin and features. So that would mean the catmins would have changed a copy
of the database, then told us “eh, go see what we did,” and then we would have
had a discussion, and maybe a few back and forth, and in the end, they would
have to do all the final changes again on the real database because they don’t
have a direct access to the database and can’t write scripts or do partial saves
and partial updates and the actual database would have changed in the meanwhile
too.

Author:

SylvainLS

Posted:

Aug 11, 2019 09:02

Subject:

Re: 4460 a/b: wrong height

Viewed:

34 times

Topic:

In Catalog, JusTiCe8 writes:

Thank you both for the heads up.

Still, parts have "Size: 2 x 1 x 3 in studs"

This is the issue, when many units are used, they have to be explicitly written
to avoid such confusion, as history tells us, help page on BL are not enough.

I suggest to add a note on each single page of inventory for parts (done
by front "code" obviously, default design for parts for instance) about the units
used. Kind of studs from width/length, brick height for height.

Or that the size be formatted as “2 x 1 x 3 (studs x studs x bricks)” or, better,
“2 studs x 1 stud x 3 bricks.”

And these suggestions have been made almost every time a remark such as yours
was made but nothing changed

Author:

SylvainLS

Posted:

Aug 10, 2019 17:55

Subject:

Re: Inventory Change Request for Set 6386-1

Viewed:

26 times

Topic:

Inventories Requests

In Inventories Requests, ziddi writes:

Please make changes to the following inventory:

6386-1 (Inv) Police Command Base
347 Parts, 4 Minifigures, 1986
Sets: Town: Classic Town: Police

* Add 1 Part 3022 Black Plate 2 x 2
* Add 1 Part 3176 Black Plate, Modified 3 x 2 with Hole

Comments from Submitter:
Steps 10 and 13 of the helicopter, pages 3 and 4

Déjà dans l’inventaire, en Alternate.
Il y a une note dans l’inventaire:

«
Redesigned during production.

There are at least 2 different versions of instructions for this set. The differences
for the second version are indicated in this inventory in the Alternate Items
section with Match ID 99.

Quick overview of redesign: The attachment of the rotor assembly on the helicopter
was upgraded for increased stability of the rotor and tail section.
»

Author:

SylvainLS

Posted:

Aug 1, 2019 12:16

Subject:

Re: 928 wrong plate?

Viewed:

58 times

Topic:

In Catalog, legoman77 writes:

[…]
It is hard to believe that Lego makes
mistakes, most of us think that they are gods on Mt Olympus. They also contribute
to problems and often in the distant past put whatever they had into sets. The
old set 800 (I think that that is the number) called for a garage and they substituted
something totally different. They had ran out of the correct parts.

Considering Greek gods are far from paragons of perfection, subject to their
whims, inconsistent, unreasonable, and uncaring of us, mortals, I’d say “most
of us” are on to something here

Author:

SylvainLS

Posted:

Jul 31, 2019 13:16

Subject:

Re: How to compare parts lists with my inventory

Viewed:

28 times

Topic:

In Inventories, VOTB writes:

If you put all the items you want into a "want list" you can visit your own store
and see what parts you have that are on that want list.

At the top of the page under your "Shop," "Terms," and "Feedback" tabs you will
see "Wanted List." If you click on that you can cycle through your want lists
and see what you have.

And you can part out a set in a WL here: https://www.bricklink.com/v2/wanted/partout.page

Author:

SylvainLS

Posted:

Jul 26, 2019 11:13

Subject:

Re: Either a bonafide brain-fart, or a seizure...

Viewed:

37 times

Topic:

In Suggestions, Teup writes:

In Suggestions, SylvainLS writes:

In Suggestions, cycbuild writes:

In Suggestions, Teup writes:

In Suggestions, cycbuild writes:

Sylvain has spent a lot of time familiarizing himself with BrickLink, and is
a frequent contributor here. There's no need to be so relentlessly dismissive.

I agree. But in all fairness we can't ignore the question in the back of
our minds: When is this guy finally going to buy some more LEGO?

My wallet has the reverse question

Though getting around 700€ of LEGO for around 15€ thanks to coupons and destocking
made us both quite happy a couple months ago

Wow!

Then my question changes... Why is this guy not selling any LEGO?

What, with all the problems you sellers continuously whine about on the forum?

Besides, MY precious, MINE!

Author:

SylvainLS

Posted:

Jul 26, 2019 10:00

Subject:

Re: Either a bonafide brain-fart, or a seizure...

Viewed:

45 times

Topic:

In Suggestions, cycbuild writes:

In Suggestions, Teup writes:

In Suggestions, cycbuild writes:

Sylvain has spent a lot of time familiarizing himself with BrickLink, and is
a frequent contributor here. There's no need to be so relentlessly dismissive.

I agree. But in all fairness we can't ignore the question in the back of
our minds: When is this guy finally going to buy some more LEGO?

My wallet has the reverse question

Though getting around 700€ of LEGO for around 15€ thanks to coupons and destocking
made us both quite happy a couple months ago

::Gallic shrug::

Indeed

Author:

SylvainLS

Posted:

Jul 26, 2019 08:07

Subject:

Re: Either a bonafide brain-fart, or a seizure...

Viewed:

42 times

Topic:

In Suggestions, popsicle writes:

[…]
Sorry my pet,

That’s not funny. That’s insulting.

I don't know what you're babbling about here in your sleep
deprived state

And another insult.

Here is what I actually said "I really don't know if I'll take your advise
on this particular question, as earnestly as I would some others here. You've
got no skin in the game, as they say."

And I said, several times:
1. Buyers are a part of the selling game. Or please explain to me to whom would
you send those notifications and who’s gonna pay for the orders?
Might I remind you sellers only get a bit more than 97% of the money whereas
buyers pay 100%.
2. You linked a message from a 0-fb buyer as motive for this idea.

[… other insults …]

Can’t you just even answer arguments with counter arguments? Do you have to
always resort to condescension and making fun of people in every discussion you
take part?

I thought this time would be different because you started the thread but I was
wrong. You still believe it’s some sort of game of which you’re the best player
and in which you can loftily praise and admonish.
You’re just a bully.

Author:

SylvainLS

Posted:

Jul 25, 2019 23:56

Subject:

Re: Either a bonafide brain-fart, or a seizure...

Viewed:

41 times

Topic:

In Suggestions, popsicle writes:

[…]

gallic friend, as a non seller and not much of a buyer (it
would appear from your history here) I really don't know if I'll take
your advise on this particular question, as earnestly as I would some
others here. You've got no skin in the game, as they say.

You’re talking about sellers reaching to buyers. I’d have thought buyers’ opinions
would be of interest to you.
But maybe it’s a cultural thing. After all, EU is opt-in while the USA are opt-out.
Recipients like to be in the loop here, not treated like kettle/cattle….

Besides, if you only consider sellers or very frequent buyers then I don’t understand
why you linked the message of a zero feedback buyer as a motive for your idea.
Or is there a “too much but not enough” range of buyers you’re excluding?

But I am glad you came out to play with me again

Make up your mind: you just said you don’t want me and my kind on the field

"you and your kind?"

Feeling persecuted, are you? No, my dove. To me you are
one-of-a-kind.

Once again, make up your mind.

You said you didn’t want to consider my opininon because I’m a non seller, neither
0- nor “enough”- (whatever that would be) FB buyer. I thought that applied to
all non sellers, neither 0- nor “enough”- (whatever that would be) FB buyers,
or even all buyers-only.
Doesn’t that fall under the phrase “me and my kind”?

And now you’re saying I’m alone. So it’s only my opinion you don’t want to consider?

So, either you don’t want me-and-my-kind’s opinion or you don’t want my opinion.
That’s not my feeling persecuted, that’s your dismissing my opinion.

It’s your right not wanting to care about someone’s opinion but, besides being
inconsistent with first having asked everyone’s opinions, you can’t both say
you don’t care about someone’s opinion and then deny you said it.

And, by the way, stop giving me names. I’m not your pigeon or any other pet.
That’s condescending.

But why all the hostility, are we not best of friends

Seems to me your best friend is liquid and bubbly.

It's the middle of the night for you in France. Try not to dwell on thoughts
of me, and what I think. Get some sleep...

Don’t mind my sleep, I sleep like a baby: I wake up every other hour and I cry.

Or maybe this one: I sleep very well, some nights I even sleep more than once!

Author:

SylvainLS

Posted:

Jul 25, 2019 22:08

Subject:

Re: Either a bonafide brain-fart, or a seizure...

Viewed:

46 times

Topic:

In Suggestions, popsicle writes:

[…]
It's sounds like you've been working on it, keep it up!

Not really, I was only reacting to what you wrote, no hard work involved.

But, my beautiful

That’s a first….

But I am glad you came out to play with me again

Make up your mind: you just said you don’t want me and my kind on the field

Author:

SylvainLS

Posted:

Jul 25, 2019 20:14

Subject:

Re: Either a bonafide brain-fart, or a seizure...

Viewed:

84 times

Topic:

In Suggestions, popsicle writes:

Wayne's post and others like it, https://www.bricklink.com/message.asp?ID=1150409
brings to mind an idea that briefly visited my headspace some time ago:

No, no, you tempter, I won’t ask if it felt alone in there!

A type of reverse want list. That is, a way that sellers could peruse the current
want lists to specific buyer's needs, to then as a seller, proactively engage
members like Wayne with offers on items they have on their want list.

Kinda like amping-up the want list and selling process, by getting the sellers
more involved in increasing their sales by actually selling

It's just a rough draft of an idea. Limitations, restriction and other refinements
of the idea, expected.

But hey, BL shot-callers, it speaks directly to upping the sales numbers!

Hmm, let’s see if I understand correctly.

Now, the buyer can search the stores that have the most items for their WLs.
They need to actualize their search from time to time to see if new sellers /
better matches appear.

And you’d want that search to be automatized so that the buyer receive a notification
for their whole WL?

If that’s it, when will that notification be sent? When the WL is X% fulfill(able)?
— If X is too high, many WLs will never have such a notification.
— If X is too low, that could make for a lot of notifications.

Or do you just want the search to be reversed, that a seller actively search
for WLs they can fulfill with their inventory?

Here again, percentage of fulfillment could be what makes it useful or spamful.

Anyway, I’m not sure it’s very different from the already existing WL notification
system except it would be for several parts at once, not one by one.
I rarely use that, indeed because that would cause too many notifications for
common parts and it doesn’t tell me if the seller has other parts, so adding
that multiple parts feature could be interesting. Though I’m not sure I would
opt in: it’s as easy to make a search from time to time.

A related question: Can’t sellers easily see on how many WLs their parts are
so that they can decide when to send notifications?
I mean, do you have to browse all your inventory part by part to have this info?

Author:

SylvainLS

Posted:

Jul 23, 2019 19:56

Subject:

Re: Plant 2417?

Viewed:

32 times

Topic:

In Catalog, Biscuit_head writes:

Sustainability: avoidance of the depletion of natural resources in order to maintain
an ecological balance.
They're using less crude oil by no longer using it to make plant peices.
They could possibly make all of the parts from plants instead of oil once they
find enough sugar cane farms that can keep up with the demand.

No, they couldn’t. Most of the parts are ABS, not PE. Different plastics, different
processes.

PE can be made from ethanol. (Ahoy matey, sugar cane is rum!)
ABS is more complex.

Author:

SylvainLS

Posted:

Jul 17, 2019 11:29

Subject:

Re: wish list on checkout

Viewed:

26 times

Topic:

In Suggestions, Umpfinho writes:

In Suggestions, SylvainLS writes:

You can create a WL from the cart (so just before checkout).

Or simply open the details of your order and there’s a button “Add Order Items
To My Wanted List” at the bottom, just below all the items, above your own address.

Good idea!
But I need a list where my existing WL are shown after the order is placed (checkout).

There already is a link at checkout for searching your order in your WLs.

And you can do it whenever you want from your WLs with the order number, or
from the order summary page with the scroll icon (which appears when you select
the option “Items in Order in My Wanted List Icon” on this page: https://www.bricklink.com/orderSettingsCols.asp?v=p&viewFrom=O
).

Author:

SylvainLS

Posted:

Jul 17, 2019 09:58

Subject:

Re: wish list on checkout

Viewed:

32 times

Topic:

In Suggestions, Umpfinho writes:

Hi.
Is it possible to create a list after the checkout, in which the wish lists can
be recognized, where the parts came from?
Maybe with a new function?
Would be great!

Author:

SylvainLS

Posted:

Jul 2, 2019 16:18

Subject:

Re: 10205 : Parts to be removed from Inventory

Viewed:

51 times

Topic:

In Inventories, SezaR writes:

In Inventories, SylvainLS writes:

In Inventories, randyf writes:

[…]
I am still on holiday, but please do not change this inventory until we discuss
it. There is a simple reason the inventory is the way it is.

“… but there’s not enough room in the margins.”

Even in that case, finally Wiles found a notebook having enough room in its margins
to provide a complete proof that fascinated people. for this case, don't
worry

But it took almost 200 years between Galois and Wiles!

Argh, what a killing suspense!

Author:

SylvainLS

Posted:

Jul 1, 2019 15:18

Subject:

Re: 10205 : Parts to be removed from Inventory

Viewed:

41 times

Topic:

In Inventories, randyf writes:

[…]
I am still on holiday, but please do not change this inventory until we discuss
it. There is a simple reason the inventory is the way it is.

“… but there’s not enough room in the margins.”

Argh, what a killing suspense!

Author:

SylvainLS

Posted:

Jun 24, 2019 11:37

Subject:

Re: brown rotating box with part # 5483

Viewed:

53 times

Topic:

In Catalog, clearingtoys writes:

In Catalog, dakotakidsshop writes:

looking for help figuring out what this is and what it is used for. part # non
it 5483 but dont seem to yield any results when searching that #.

Part 48316c01 from Set 4756

48316c01 Container, Box 8 x 8 x 8 with Dark Bluish Gray Switching Mechanism (Set 4756)
Parts: Container

4756-1 (Inv) Shrieking Shack
432 Parts, 4 Minifigures, 2004
Sets: Harry Potter: Prisoner of Azkaban

Author:

SylvainLS

Posted:

Jun 12, 2019 07:20

Subject:

Re: There should really be an FOV slider!

Viewed:

47 times

Topic:

In Suggestions, DeLeSepTep writes:

I apologize if this is for suggestions for the website specifically, but I couldn't
find where to submit suggestions for the Bricklink Studio program itself.
[…] Thanks for reading this, and I again apologize
if this was the wrong place to post this but I couldn't find any other place
to suggest this.

http://forum.bricklink.com/

Author:

SylvainLS

Posted:

Jun 11, 2019 17:23

Subject:

Re: Have all members pay BL $1 to buy and/or sell

Viewed:

51 times

Topic:

Funny how 15-months old suggestions can be resurrected

Author:

SylvainLS

Posted:

Jun 11, 2019 12:51

Subject:

Re: parts

Viewed:

23 times

Topic:

In Catalog, mikemuscar writes:

help I'm looking for parts. 1 what Lego digital designer calls mini alien
pet. 2 what Lego digital designer calls shell morning star. dose anyone
have this parts or know wat set they are in. also where if anywhere I can find
them in the studio program.

In LDD, look at the Part # / Design ID in the status line. Use that as a search
term. To catch patterned or composite parts, add a star.

“MINI ALIEN PET” = 95204, a search for “95204*” gives:

95204pb01 Alien Clinger with White Eye with Black Pupil Pattern
Parts: Animal, Land

“SHELL - MORNING STAR” = 54177, a search for “54177” gives:

54177 Minifigure, Weapon Spiked Ball Half with 2 Axle Holes
Parts: Minifigure, Weapon

If you want both, add them in a Wanted List and then you can search stores (
https://www.bricklink.com/v2/wanted/buy.page ).

Author:

SylvainLS

Posted:

Jun 8, 2019 11:48

Subject:

Re: 'Prefer My BrickLink Classic?'

Viewed:

27 times

Topic:

In Suggestions, randyf writes:

[…]
And they always seem to add it on a Friday as they are leaving for the weekend.

It’s because the ones they don’t do on a Friday as they are leaving for the weekend
are either:
1. not breaking anything because they weren’t made by sleep-deprived, eager to
leave for the weekend devs,
2. or quickly fixed because said devs hadn’t yet rushed to the nearest dive to
drown their memories of that awful spaghetti code and all the 500’s they got
the whole week.

Author:

SylvainLS

Posted:

May 16, 2019 17:03

Subject:

Re: Interesting

Viewed:

48 times

Topic:

In Colors, Adjour writes:

[…]

Sorry, just cracked me up. It's been a long week.

haha, glad I could help.

I just have so many moments on this forum where I'm like "OH! OH! I FInaLLY
kNOW ThIS oNE" and then someone beats me to it and I'm sad.

Sorry

I try to wait for others to answer but sometimes: https://www.xkcd.com/386/

I need to find LEGO people IRL I think. The people around me at work are over
it, lol

Nah, it’s LEGO which’s above them

Author:

SylvainLS

Posted:

May 15, 2019 18:11

Subject:

Re: Interesting

Viewed:

57 times

Topic:

In Colors, randyf writes:

I just opened my first sealed set ever where every part that is supposed to be
white looks almost exactly like a perfect match for tan or slightly lighter.
It is quite weird to be expecting white parts and seeing everything look tan.
You would never know these parts were ever white by looking at them since the
color is even on all surfaces of every part. Because the set was sealed, it could
not be UV damage due to sunlight as so many sites claim, so some other chemical
process occurs. There must be some sort of breakdown of some additive in the
ABS due to storage conditions of the set (maybe higher temperatures). I don't
know what it is, but I am less than happy with my purchase now.

You read the wrong sites

UVs don’t tan the plastic. UVs accelerate or make possible some chemical reactions
in the plastic.
Other things may accelerate the reactions. And the reactions also occur all
by themselves.

Some additives do react more easily or mode badly than others. That’s what happened
with the old bricks / old ABS.

And yes, UVs can also help “cure” the problem because it helps oxydation reactions,
which are also greatly helped by the presence of free oxygen, like when the parts
are soaking in peroxyde.

Author:

SylvainLS

Posted:

May 13, 2019 14:12

Subject:

Re: Does part 6057 (Short Rigging) need a variant

Viewed:

43 times

Topic:

In Catalog, TorontoLego writes:

I don't know.

Do you have black ones and brown ones? Can you check to see if this holds true
for at least all the black ones?

Nope. I have none. Dark Ages.

If the sets that use them are using them differently, — that is, if they aren’t
substitutable —, the variant would really be necessary. It wouldn’t be the first
time TLG thought better about making a part “in System,” like

4081 Plate, Modified 1 x 1 with Light Attachment (Undetermined Type)
Parts: Plate, Modified
Marked for Deletion

4623 Plate, Modified 1 x 2 with Bar Arm Up (Undetermined Type)
Parts: Plate, Modified

I wanted to look at the building instructions to look for a mathematical necessity
for the change, but there are some 14 sets that use them, so knowing from which
sets they came from would have narrowed the search.

On the other hand, another possibility simply is that some are not LEGO

Author:

SylvainLS

Posted:

May 13, 2019 07:26

Subject:

Re: Does part 6057 (Short Rigging) need a variant

Viewed:

48 times

Topic:

6057 Boat, Mast Rigging Short 16 x 5
Parts: Boat

In Catalog, TorontoLego writes:

The four black ones and one brown one are about a plates width shorter. I can't
be the first one to notice this!

Do you know which sets they come from?

It would be interesting to check if something changed in their uses, mathematically
speaking.

Author:

SylvainLS

Posted:

May 9, 2019 11:00

Subject:

Re: New Rigid Hoses flex

Viewed:

38 times

Topic:

In Suggestions, frankool86 writes:

Hi Studio Devs,
thanks for adding rigid hose flex feature

i am actually trying that new feature and cant seem to make it work on that type
of projet (attached picture)
looks like the tip of the hose wont follow camera orientation. it is always facing
my mouse cursor in all camera modes/orientation. That said, i just cant plug
the tip of the hose in the proper way as you can see on the picture. Maybe i
need tips on that to make it work.
Keep doing a great job on studio

First, the dedicated forum for Studio is http://forum.bricklink.com/ (which,
despite the generic name, isn’t this one).

Then, you can simply rotate the hose’s head with the arrow keys (shift for 45°
increments).

Author:

SylvainLS

Posted:

May 8, 2019 15:27

Subject:

Re: Set 71040 Disney castle

Viewed:

37 times

Topic:

In Catalog, paolocolombo writes:

Goodmorning everyone!
Set 71040: are there 2 versions? I noticed that the front box "type 1" under
the word "16+" has:
- the number of pieces
- the word "building toy"
- has 7 minifig.
The front box type 2 does NOT have the number of pieces and does not have the
word "building toy"; has 5 minifig.
Are there any fakes?
Also on the small side where there are minifigs in the type 2 box there are no
small writings.
Thanks as always for the info.

71040-1 (Inv) Disney Castle
4043 Parts, 7 Minifigures, 2016
Sets: Disney

71040-1 Disney Castle
Original Boxes: Disney

Maybe just a US / EU difference on the boxes: number of parts is an obligation
in the USA, it’s rarely on EU boxes.

For the minifigures, 5 are Disney characters, 2 are statues. They just decided
the statues weren’t real minifigures after all.

There might be other differences in the production runs: newer variants, different
extra parts….

At least, for now, no one has come and said the inventory was wrong

Author:

SylvainLS

Posted:

May 8, 2019 06:38

Subject:

Re: Mystery part

Viewed:

70 times

Topic:

In Catalog, Hygrotus writes:

I have pending approval something like this
[p=Unknown]

Did anybody see something like this? Anybody knows anything about it?

Some kind of button?

Author:

SylvainLS

Posted:

May 7, 2019 11:10

Subject:

Re: Automatic store selection in Buy mocs

Viewed:

31 times

Topic:

In Suggestions, titips writes:

Hi,
I hope this is the right place to post this.
I think it would be a good thing to be able to set the maximum number of stores
used to fulfill a wanted list search of matching stores in order to have a good
compromise between items costs and shipping costs.
Since shipping costs can't be taken in count during stores automatic selection,
you could add a parameter "max N° of stores" so that we can compair a result
with 10 stores and very low pieces costs and 2 stores with more high pieces costs.
Sometime shipping costs from many stores override high pieces costs from 1 or
2 stores.
hope is clear enough

First, it has been said that the algorithm has a (mysterious) way to include
shipping costs in its calculations.

Then, at a time there were up to three options for Auto-Select:
1. minimize price,
2. minimize number of stores,
3. “best” price (we never could get an answer about what “best” meant).

And they were removed because they didn’t work as advertized and there were “funny”
results (“min stores” cheaper than “min price” or “min price” with fewer stores
than “min stores” and such).

IOW, I doubt BL could implement your suggestion.

Moreover, it has been said several times that development on this website is,
at best, frozen.
So, if I were you, I wouldn’t hold my breath for that suggestion to be even considered.

Author:

SylvainLS

Posted:

May 5, 2019 12:54

Subject:

Re: nb of 45677 red pieces in 4883 creator set

Viewed:

35 times

Topic:

https://www.bricklink.com/catalogInvChangeItem.asp?itemType=S&itemNo=4883-1&viewDate=Y&viewStatus=1

In Inventories, stephannie writes:

hello !
in the 4883

4883-1 (Inv) Gear Grinders
273 Parts, 2005
Sets: Designer Sets: Traffic

"gear grinders" creator set, 4 red pieces ref 45677 are needed on
the paper instruction (see my photo). And 5 are needed on the Bricklink Inventory.
As it is a creator, with different building options, the exact needed number
is not easy to know. All i know is that 4 of these red pieces are enough to build
each of the suggested buiding options in the instruction. But separately, one
after the other. I don't know if TLG designed this set as being able to build
several "gear grinders" at the same time ? ... Another member owns this set ?
Good sunday to all of you !!

Brickset (= more or less LEGO) agrees with BrickLink to reach 273 pieces in total,
so, unless another part is wrong, it looks correct.

Note that the 5th part was changed to extra on February, 16th 2012, and changed
back to regular on the 19th.
Unfortunately, we can’t see the messages accompanying the changes anymore

Author:

SylvainLS

Posted:

May 4, 2019 19:00

Subject:

Re: Inventory Change Request for Set 157-1

Viewed:

17 times

Topic:

Inventories Requests

In Inventories Requests, taxan writes:

[…]
If 3229 = 3229a and 3230 = 3230a.
Then they should merge into 3229 and 3230.
There are no reason to leave them with the "a" version.
If we in the future discovery a different version of the Blue Curved Rail, then
we have a reason to have the "a" and a "b" version again.

‘b’ doesn’t exist in Blue but it exists in Light Gray.
That’s the reason why ‘a’ and ‘b’ versions exist.

‘not-a-not-b’ should have been ‘u’ndetermined, and then deleted.

Author:

SylvainLS

Posted:

May 3, 2019 16:40

Subject:

Re: Change NPB Timeline

Viewed:

52 times

Topic:

In Suggestions, tonnic writes:

[…]
If I look at your large amount of feedback you generate I almost suspect you
of having a Lego business too but on a different sellingpoint... 😅

Almost 1 order a day, I suspect them of being in love with their post(wo)man

Author:

SylvainLS

Posted:

May 2, 2019 07:20

Subject:

Re: Coral

Viewed:

44 times

Topic:

In Colors, Teup writes:

[…]
I'd go for salmon or something like that.

Are you talking about the colour of the fresh flesh, the cooked flesh, or the
smoked flesh? At what time of the year the salmon was killed? What did the
salmon eat? Were there artificial colorants added? Or are you talking about
the colour of its scales? And are they the scales on the belly, the head, the
tail? And which of the 8 species of fish that we name “salmon”?

Author:

SylvainLS

Posted:

May 1, 2019 13:59

Subject:

Re: Shipping adress Belgium

Viewed:

39 times

Topic:

In Suggestions, reci writes:

Thank you for your answer

I tried but the system wont let me save my adress with the last field un-answered...

We had the same problem with French addresses (compounded with the use of wrong
names for the régions

). It only took 2 years of nagging to be fixed.

In the mean time, add a remark/note at checkout and hope the seller will read
and heed it.

Author:

SylvainLS

Posted:

Apr 27, 2019 19:30

Subject:

Inventory Change Request for Set 41347-1

Viewed:

30 times

Topic:

Inventories Requests (Entry)

Status:

Open

Please make changes to the following inventory:

41347-1 (Inv) Heartlake City Resort
998 Parts, 4 Minifigures, 2018
Sets: Friends

* Delete 1 Part 20482 Trans-Clear Tile, Round 1 x 1 with Bar and Pin Holder (Extra)
* Add 2 Part 20482 Trans-Clear Tile, Round 1 x 1 with Bar and Pin Holder (Extra)
* Delete 2 Part 4073 Trans-Yellow Plate, Round 1 x 1 Straight Side (Extra)
* Add 4 Part 4073 Trans-Yellow Plate, Round 1 x 1 Straight Side (Extra)

Comments from Submitter:
Sealed box.

Author:

SylvainLS

Posted:

Apr 27, 2019 15:55

Subject:

Inventory Change Request for Set 75199-1

Viewed:

27 times

Topic:

Inventories Requests (Entry)

Status:

Open

Please make changes to the following inventory:

75199-1 (Inv) General Grievous' Combat Speeder
146 Parts, 2 Minifigures, 2018
Sets: Star Wars: Star Wars The Clone Wars

* Delete 1 Part 64567 Metallic Silver Minifigure, Weapon Lightsaber Hilt Straight (Extra)
* Add 2 Part 64567 Metallic Silver Minifigure, Weapon Lightsaber Hilt Straight (Extra)

Comments from Submitter:
Hmm, change still doesn’t work?

Two new sealed boxes. 1 regular + 1 extra in bag 1 with Mace Windu, 4 regular + 1 extra in bag 2 for G. Grievous.

Author:

SylvainLS

Posted:

Apr 22, 2019 07:51

Subject:

Re: Brand filter not working

Viewed:

29 times

Topic: