Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies| Author: | popsicle  | | Posted: | Feb 14, 2020 20:09 | | Subject: | Re: An ongoing issue... | | Viewed: | 106 times | | Topic: | Suggestions | |
| In Suggestions, manganschlamm writes:
| | In Suggestions, popsicle writes:
| | Among the few chronic, but easy (I assume) site fixes, is:
The inability of the buyer in a transaction to apply order status changes i.e
received/complete, if the seller fails to mark the order as shipped. In my experience,
it only occurs occasionally but regularly.
It’s not a burning priority considering how long we’ve dealt with it, and also
considering all that’s taking place at the moment, but a nagging issue nonetheless.
Maybe at some point, a tweak or two could be made with the site’s code?
Thank you
|
Would be really good if buyers could change the status.
|
+1
|
 |
| Author: | axaday | | Posted: | Feb 14, 2020 16:57 | | Subject: | Re: Inventory Change Request for Set 4730-1 | | Viewed: | 33 times | | Topic: | Inventories Requests | |
| Withdrawn
In Inventories Requests, randyf writes:
| | In Inventories Requests, Turez writes:
| | In Inventories Requests, axaday writes:
| | Please make changes to the following inventory:
* Add 1 Part 4073 Chrome Gold Plate, Round 1 x 1
* Add 1 Part 522 Red Minifigure, Cape Cloth, Standard - Traditional Starched Fabric - Height 4 cm (22231)
* Add 1 Part 522 Green Minifigure, Cape Cloth, Standard - Traditional Starched Fabric - Height 4 cm (22231)
* Add 1 Part 522px2 Black Minifigure, Cape Cloth, Standard with Black Back and Stripes Pattern
Comments from Submitter:
When I find a cardboard sleeve I get it in the catalog before I open it to inventory it. I assumed there were bands or something in here, but I was really surprised when I opened it that it contains parts not in the inventory. Unlike the sleeve with the minifigs capes, this sleeve was sealed inside Bag #1.
|
Looks like a packaging error to me. This cardboard sleeve belongs to
and my chamber of secrets (which I got as a child 17 years ago) definitly did
not came with these parts.
|
Definitely a packaging error. These parts will not be added to the inventory
of set 4730.
Cheers,
Randy
|
|
|
| Author: | StormChaser | | Posted: | Feb 14, 2020 16:33 | | Subject: | Re: February Roadmap Project: Old and New | | Viewed: | 78 times | | Topic: | Catalog | |
| In Catalog, StormChaser writes:
| | In the spirit of trying to ensure that the Catalog Roadmap is not just something
to look at, I am continuing with the goal of moving through one project each
month.
|
| | The goal is to wrap this up by the end of February.
|
This project has been completed:
https://www.bricklink.com/help.asp?helpID=2476
For the last two weeks of the month I'm going to focus on the three projects
still in progress. Around the beginning of March we'll start something new.
|
|
| Author: | randyf | | Posted: | Feb 14, 2020 15:39 | | Subject: | Re: Inventory Change Request for Set 4730-1 | | Viewed: | 33 times | | Topic: | Inventories Requests | |
| In Inventories Requests, Turez writes:
| | In Inventories Requests, axaday writes:
| | Please make changes to the following inventory:
* Add 1 Part 4073 Chrome Gold Plate, Round 1 x 1
* Add 1 Part 522 Red Minifigure, Cape Cloth, Standard - Traditional Starched Fabric - Height 4 cm (22231)
* Add 1 Part 522 Green Minifigure, Cape Cloth, Standard - Traditional Starched Fabric - Height 4 cm (22231)
* Add 1 Part 522px2 Black Minifigure, Cape Cloth, Standard with Black Back and Stripes Pattern
Comments from Submitter:
When I find a cardboard sleeve I get it in the catalog before I open it to inventory it. I assumed there were bands or something in here, but I was really surprised when I opened it that it contains parts not in the inventory. Unlike the sleeve with the minifigs capes, this sleeve was sealed inside Bag #1.
|
Looks like a packaging error to me. This cardboard sleeve belongs to
and my chamber of secrets (which I got as a child 17 years ago) definitly did
not came with these parts.
|
Definitely a packaging error. These parts will not be added to the inventory
of set 4730.
Cheers,
Randy
|
|
| Author: | manganschlamm | | Posted: | Feb 14, 2020 14:55 | | Subject: | Re: An ongoing issue... | | Viewed: | 81 times | | Topic: | Suggestions | |
| In Suggestions, popsicle writes:
| | Among the few chronic, but easy (I assume) site fixes, is:
The inability of the buyer in a transaction to apply order status changes i.e
received/complete, if the seller fails to mark the order as shipped. In my experience,
it only occurs occasionally but regularly.
It’s not a burning priority considering how long we’ve dealt with it, and also
considering all that’s taking place at the moment, but a nagging issue nonetheless.
Maybe at some point, a tweak or two could be made with the site’s code?
Thank you
|
Had that once with an order that did not get shipped. Was marked as Paid. Then
I issued NSS, good communication with the seller, problem solved, positive feedback
and everything good. But order status was set back to Pending after I removed
the NSS. And with this it still sits in my list. Would be really good if buyers
could change the status.
Forgot to mention: This page cannot be displayed because an internal server error
occurred.
|
|
| Author: | A.Lukinov | | Posted: | Feb 14, 2020 12:41 | | Subject: | Inventory Change Request for Set 75884-1 | | Viewed: | 29 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 30363pb037 Black Slope 18 4 x 2 with Gold Stripes and Black ‘68’ in White Circle Pattern (Sticker) - Set 75884 (Counterpart)
|
| Author: | McReece | | Posted: | Feb 14, 2020 10:37 | | Subject: | Inventory Change Request for Set 6271-1 | | Viewed: | 30 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Delete 1 Part 3795 White Plate 2 x 6
* Add 1 Part 3034 White Plate 2 x 8 (match ID 1)
|
| Author: | obi4543 | | Posted: | Feb 14, 2020 10:36 | | Subject: | Inventory Change Request for Set 7716-1 | | Viewed: | 20 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Change 1 Part Black {32524 Technic, Liftarm 1 x 7 Thick to 40490 Technic, Liftarm 1 x 9 Thick}
|
|
| Author: | axaday | | Posted: | Feb 14, 2020 09:03 | | Subject: | Re: Inventory Change Request for Set 4730-1 | | Viewed: | 29 times | | Topic: | Inventories Requests | |
| Should we ignore it?
I have another 4730 coming in the mail today.
In Inventories Requests, Turez writes:
| | In Inventories Requests, axaday writes:
| | Please make changes to the following inventory:
* Add 1 Part 4073 Chrome Gold Plate, Round 1 x 1
* Add 1 Part 522 Red Minifigure, Cape Cloth, Standard - Traditional Starched Fabric - Height 4 cm (22231)
* Add 1 Part 522 Green Minifigure, Cape Cloth, Standard - Traditional Starched Fabric - Height 4 cm (22231)
* Add 1 Part 522px2 Black Minifigure, Cape Cloth, Standard with Black Back and Stripes Pattern
Comments from Submitter:
When I find a cardboard sleeve I get it in the catalog before I open it to inventory it. I assumed there were bands or something in here, but I was really surprised when I opened it that it contains parts not in the inventory. Unlike the sleeve with the minifigs capes, this sleeve was sealed inside Bag #1.
|
Looks like a packaging error to me. This cardboard sleeve belongs to
and my chamber of secrets (which I got as a child 17 years ago) definitly did
not came with these parts.
|
|
|
| Author: | Odur | | Posted: | Feb 14, 2020 08:41 | | Subject: | Inventory Change Request for Set 41324-1 | | Viewed: | 33 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 75c06 Black Hose, Rigid 3mm D. 6L / 4.8cm (Extra)
* Add 1 Part 4274 Blue Technic, Pin 1/2 (Extra)
* Add 1 Part 33291 Bright Green Plate, Round 1 x 1 with Flower Edge (4 Knobs / Petals) (Extra)
* Add 1 Part 98138pb023 Flat Silver Tile, Round 1 x 1 with Black Number 5 Coin Pattern (Extra)
* Add 3 Part 33291 Lavender Plate, Round 1 x 1 with Flower Edge (4 Knobs / Petals) (Extra)
* Add 1 Part 4073 Light Bluish Gray Plate, Round 1 x 1 (Extra)
* Add 1 Part 3713 Light Bluish Gray Technic Bush (Extra)
* Add 1 Part 98138 Light Bluish Gray Tile, Round 1 x 1 (Extra)
* Add 1 Part 90540 Lime Minifigure, Utensil Ski Pole 3L with Handle, Stop Ring and Side Stops (Extra)
* Add 1 Part 3024 Lime Plate 1 x 1 (Extra)
* Add 1 Part 4073 Lime Plate, Round 1 x 1 (Extra)
* Add 1 Part 46304 Magenta Minifigure, Visor Snow Goggles (Extra)
* Add 1 Part 3024 Magenta Plate 1 x 1 (Extra)
* Add 1 Part 3070b Magenta Tile 1 x 1 with Groove (3070) (Extra)
* Add 1 Part 3070b Medium Azure Tile 1 x 1 with Groove (3070) (Extra)
* Add 1 Part 33078 Red Hot Dog / Sausage (Extra)
* Add 1 Part 4073 Red Plate, Round 1 x 1 (Extra)
* Add 1 Part 3713 Red Technic Bush (Extra)
* Add 3 Part 33183 Reddish Brown Carrot Top / Twig (Extra)
* Add 1 Part 18654 Tan Technic, Pin Connector Round 2/3 L (Extra)
* Add 1 Part 25269pb001 Tan Tile, Round 1 x 1 Quarter with Lattice Pie Pattern (Extra)
* Add 1 Part 4073 Trans-Dark Pink Plate, Round 1 x 1 (Extra)
* Add 1 Part 98138 Trans-Light Blue Tile, Round 1 x 1 (Extra)
* Add 2 Part 4073 Trans-Yellow Plate, Round 1 x 1 (Extra)
* Add 1 Part 46304 White Minifigure, Visor Snow Goggles (Extra)
* Add 1 Part 3024 White Plate 1 x 1 (Extra)
* Add 3 Part 4073 White Plate, Round 1 x 1 (Extra)
* Add 4 Part 54200 White Slope 30 1 x 1 x 2/3 (Extra)
* Add 1 Part 4265c Yellow Technic Bush 1/2 Smooth (Extra)
Comments from Submitter:
From new sealed set
|
|
| Author: | go4bob | | Posted: | Feb 14, 2020 08:23 | | Subject: | Inventory Change Request for Set 75120-1 | | Viewed: | 28 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 2780 Black Technic, Pin with Friction Ridges Lengthwise WITH Center Slots (Extra)
|
| Author: | go4bob | | Posted: | Feb 14, 2020 07:34 | | Subject: | Inventory Change Request for Set 75523-1 | | Viewed: | 27 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 28821 (Not Applicable) Plastic Large Figure Kama with 4 Holes and Tan and Reddish Brown SW Scarif Stormtrooper Pattern (Extra)
|
|
| Author: | Turez | | Posted: | Feb 14, 2020 06:18 | | Subject: | Re: Inventory Change Request for Set 4730-1 | | Viewed: | 30 times | | Topic: | Inventories Requests | |
| In Inventories Requests, axaday writes:
| | Please make changes to the following inventory:
* Add 1 Part 4073 Chrome Gold Plate, Round 1 x 1
* Add 1 Part 522 Red Minifigure, Cape Cloth, Standard - Traditional Starched Fabric - Height 4 cm (22231)
* Add 1 Part 522 Green Minifigure, Cape Cloth, Standard - Traditional Starched Fabric - Height 4 cm (22231)
* Add 1 Part 522px2 Black Minifigure, Cape Cloth, Standard with Black Back and Stripes Pattern
Comments from Submitter:
When I find a cardboard sleeve I get it in the catalog before I open it to inventory it. I assumed there were bands or something in here, but I was really surprised when I opened it that it contains parts not in the inventory. Unlike the sleeve with the minifigs capes, this sleeve was sealed inside Bag #1.
|
Looks like a packaging error to me. This cardboard sleeve belongs to
and my chamber of secrets (which I got as a child 17 years ago) definitly did
not came with these parts.
|
|
| Author: | axaday | | Posted: | Feb 14, 2020 05:55 | | Subject: | Inventory Change Request for Set 4730-1 | | Viewed: | 34 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 4073 Chrome Gold Plate, Round 1 x 1
* Add 1 Part 522 Red Minifigure, Cape Cloth, Standard - Traditional Starched Fabric - Height 4 cm (22231)
* Add 1 Part 522 Green Minifigure, Cape Cloth, Standard - Traditional Starched Fabric - Height 4 cm (22231)
* Add 1 Part 522px2 Black Minifigure, Cape Cloth, Standard with Black Back and Stripes Pattern
Comments from Submitter:
When I find a cardboard sleeve I get it in the catalog before I open it to inventory it. I assumed there were bands or something in here, but I was really surprised when I opened it that it contains parts not in the inventory. Unlike the sleeve with the minifigs capes, this sleeve was sealed inside Bag #1.
|
|
| Author: | axaday | | Posted: | Feb 13, 2020 22:14 | | Subject: | Re: Inventory Change Request for Set 4730-1 | | Viewed: | 22 times | | Topic: | Inventories Requests | |
| In Inventories Requests, axaday writes:
| | Please make changes to the following inventory:
* Change 2 Part Dark Gray {2453 Brick 1 x 1 x 5 - Undetermined Stud Type to 2453a Brick 1 x 1 x 5 - Blocked Open Stud or Hollow Stud}
* Change 1 Part {Dark Orange to Dark Nougat} 30374 Bar 4L (Lightsaber Blade / Wand)
Comments from Submitter:
Sealed Set, Pics following.
|
I didn't forget that I was looking for undetermined bricks, but the bags
are almost entirely painted, so I couldn't get a shot. But that pic was
taken immediately after opening the sealed bag.
|
|
|
| Author: | axaday | | Posted: | Feb 13, 2020 22:13 | | Subject: | Inventory Change Request for Set 4730-1 | | Viewed: | 34 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Change 2 Part Dark Gray {2453 Brick 1 x 1 x 5 - Undetermined Stud Type to 2453a Brick 1 x 1 x 5 - Blocked Open Stud or Hollow Stud}
* Change 1 Part {Dark Orange to Dark Nougat} 30374 Bar 4L (Lightsaber Blade / Wand)
Comments from Submitter:
Sealed Set, Pics following.
|
|
| Author: | laulainendebra | | Posted: | Feb 13, 2020 22:03 | | Subject: | Inventory Change Request for Set 76126-1 | | Viewed: | 27 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 64680 Dark Blue Technic, Panel Fairing #14 Large Short Smooth, Side B (Counterpart)
* Add 1 Part 64394 Dark Blue Technic, Panel Fairing #13 Large Short Smooth, Side A (Counterpart)
Comments from Submitter:
stickered parts
|
|
| Author: | uwjedi | | Posted: | Feb 13, 2020 20:28 | | Subject: | Questions about 10030 UCS Star Destroyer | | Viewed: | 84 times | | Topic: | Inventories | | Status: | Open | |
| I originally purchased this set when it was still in production, and since I
have purchased the more recent version, I've decided to sell the old one.
Interestingly when I look up the inventory to decide whether to part it out
or list it as a complete set, I see the inventory is in light gray. I know that
the set was produced in both gray colors as they were switching over at the time.
I have the LBG version. I see that the complete sets in light gray seem to
be in more demand, while the parts in LBG are much more expensive, yet have very
low 6 month sale totals. Just curious if anyone knows some history/demand for
these two variants? Seems there is not much sense parting out it in LBG if there
is no demand.
Ben
|
|
| Author: | JGFW | | Posted: | Feb 13, 2020 11:02 | | Subject: | Inventory Change Request for Set 6073-1 | | Viewed: | 32 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Delete 1 Part 4502c Black Minifigure, Plume Feather Large
* Delete 1 Part 4502a Black Minifigure, Plume Feather Small
* Delete 1 Part 4502c Red Minifigure, Plume Feather Large
* Delete 1 Part 4502a Red Minifigure, Plume Feather Small
Comments from Submitter:
It is obvious from the instruction booklet that the triple plume (4502b) version is essential for the mini figures, but the small and large plumes are not visible and there is no place other than the knight's helmets for them to go. Are they truly part of the original set?
|
|
| Author: | Hygrotus | | Posted: | Feb 12, 2020 15:08 | | Subject: | Inventory Change Request for Gear 852715 | | Viewed: | 29 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* | | 852715 (Inv) Magnet Set, Minifigures SW (3) - Darth Vader, Snowtrooper, Shadow Trooper - with 2 x 4 Brick Bases blister pack
Gear: Magnet: Star Wars |
* Change 1 Minifig {sw0166 Shadow Trooper to sw0166b Shadow Trooper - Long Line on Back}
Comments from Submitter:
Just bought new sealed one and can confirm b variant here.
|
|
| Author: | SezaR | | Posted: | Feb 12, 2020 15:06 | | Subject: | Re: Inventory Change Request for Set 7740-1 | | Viewed: | 23 times | | Topic: | Inventories Requests | |
| In Inventories Requests, SezaR writes:
| | Please make changes to the following inventory:
* Add 3 Part 4093d Black Train Base 6 x 28 with 11 Round Holes Each End (Alternate) (match ID 9)
* Change 3 Part Black 4093b Train Base 6 x 28 with 10 Round Holes Each End {match ID 0 to 9}
|
Based on our research, the part
was the earliest version, produced for productions between 11th-24th week in
1980 for the market of Germany, the Netherlands, Belgium, Denmark, Sweden, Finland,
Norway. We have seen this part with this and two other trains produced in 1980
in multiple used copies and are already confident that this part was used in
early 1980 for these three trains (7740 and two other sets)
Since 1981, the production of this train was doubled, to be sold also in other
European countries like UK, Italy, France. This means 4093d approximately appeared
in only 1/27=3.7% of total copies of this train.
One of the exceptions for an early variation of a part to be added to the alternate
seciont is
When the scarcity of the earliest variant is high enough that it is unlikely
to be found in a sealed set, then it may be placed in this section.
https://www.bricklink.com/help.asp?helpID=1562#regularItems
So I request to add this part as alternate.
******
Aoout rescuing an Orphan Lego part:
Take A Lego part off The Street for less than few dollars per day, you can rescue
a part living in unthinkable circumstances. These are parts who have no one to
care for them and they likely would not survive without the care provided in
our sets's inventory.
|
|
| Author: | SezaR | | Posted: | Feb 12, 2020 14:58 | | Subject: | Inventory Change Request for Set 7740-1 | | Viewed: | 31 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 3 Part 4093d Black Train Base 6 x 28 with 11 Round Holes Each End (Alternate) (match ID 9)
* Change 3 Part Black 4093b Train Base 6 x 28 with 10 Round Holes Each End {match ID 0 to 9}
|
|
| Author: | StormChaser | | Posted: | Feb 12, 2020 05:35 | | Subject: | Inventory Change Request for Set 5004838-1 | | Viewed: | 31 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Change 1 Part Black {94164 Electric, Power Adapter / Transformer, 100V - 240V / 10V DC - Angled Top to 16521 Electric, Power Adapter / Transformer, 100V - 240V / 10V DC - Square Top}
Comments from Submitter:
The only other affected inventory should be 45517-2. For that one, I'd suggest either changing to the new part entry or adding the new entry as an alternate.
https://www.bricklink.com/message.asp?ID=1170096
|
|
| Author: | SurplusParts | | Posted: | Feb 12, 2020 04:43 | | Subject: | Inventory Change Request for Set 42104-1 | | Viewed: | 25 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 42104stk01 (Not Applicable) Sticker for Set 42104 - (65483/6282037)
Comments from Submitter:
Please add the sticker sheet to this inventory.
|
|
| Author: | axaday | | Posted: | Feb 12, 2020 00:00 | | Subject: | Re: Inventory Change Request for Set 10135-1 | | Viewed: | 26 times | | Topic: | Inventories Requests | |
| I bought the set for the third time and got a perfect referee on the extras.
This time it didn't have EITHER of the extras.
In Inventories Requests, axaday writes:
| | Please make changes to the following inventory:
* Add 10 Part clikits268 Chrome Silver Clikits Icon Accent, Plastic Star 3 1/4 x 3 1/4 with Holographic Grid of Squares Pattern (Alternate) (match ID 1)
* Add 2 Part clikits148 Chrome Silver Clikits Icon Accent, Paper Star 8 1/2 x 8 1/2 with Holographic Overlapping Circles Pattern (Alternate) (match ID 2)
* Add 1 Part clikits064 Light Purple Clikits Icon Accent, Paper Star 4 3/4 x 4 3/4 with Holographic Overlapping Circles Pattern (Extra)
* Add 1 Part clikits110 Purple Clikits Icon Accent, Paper Star 3 1/4 x 3 1/4 with Holographic Overlapping Circles Pattern (Extra)
* Add 4 Part clikits269 Chrome Silver Clikits Icon Accent, Plastic Star 4 3/4 x 4 3/4 with Holographic Grid of Squares Pattern (Alternate) (match ID 3)
* Change 10 Part Chrome Silver clikits110 Clikits Icon Accent, Paper Star 3 1/4 x 3 1/4 with Holographic Overlapping Circles Pattern {match ID 0 to 1}
* Change 2 Part Chrome Silver clikits275 Clikits Icon Accent, Plastic Star 8 1/2 x 8 1/2 with Holographic Grid of Squares Pattern {match ID 0 to 2}
* Change {3 to 2} Part Light Purple clikits064 Clikits Icon Accent, Paper Star 4 3/4 x 4 3/4 with Holographic Overlapping Circles Pattern
* Change 4 Part Chrome Silver clikits064 Clikits Icon Accent, Paper Star 4 3/4 x 4 3/4 with Holographic Overlapping Circles Pattern {match ID 0 to 3}
Comments from Submitter:
So last time I had 3 light purple 064 and 5 purple 110. This time it is 2 and 6. Assuming that the lower of each is the goal and each set had a different extra brings the part count in line with the official. On the chrome silver 4 3/4 stars, I got 2 of each this time. The other variants were complete switchouts. I think Lego probably considered the variants to be the same thing.
|
|
|
| Author: | roebuck85 | | Posted: | Feb 11, 2020 19:26 | | Subject: | Inventory Change Request for Minifig cty1055 | | Viewed: | 23 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 3626cpb2385 Yellow Minifigure, Head Black Eyebrows, White Pupils, Cheek Lines, Smirk Pattern - Hollow Stud
Comments from Submitter:
3626cpb2385 with black eyebrows only is a replacement or alternate for 3626cpb0810 with black and dark tan eyebrows. The head with black only eyebrows was found in 4 out of 5 sets (60224 - Satellite Service Mission).
|
|
| Author: | roebuck85 | | Posted: | Feb 11, 2020 19:25 | | Subject: | Inventory Change Request for Set 60224-1 | | Viewed: | 21 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 3626cpb2385 Yellow Minifigure, Head Black Eyebrows, White Pupils, Cheek Lines, Smirk Pattern - Hollow Stud (Alternate) (match ID 1)
Comments from Submitter:
3626cpb2385 with black eyebrows only is a replacement or alternate for 3626cpb0810 with black and dark tan eyebrows. The head with black only eyebrows was found in 4 out of 5 sets.
|
|
| Author: | anathema | | Posted: | Feb 11, 2020 18:08 | | Subject: | Re: Inventory Change Request for Set 454-1 | | Viewed: | 23 times | | Topic: | Inventories Requests | |
| In Inventories Requests, kevbar writes:
| | Please make changes to the following inventory:
* Delete 1 Part 6099px2 Light Gray Baseplate, Road 32 x 32 9-Stud Landing Pad with Yellow Circle, 1-way Lines Pattern (match ID 1)
Comments from Submitter:
6099p03 is shown as a alternative item but it is the regular as seen in the picture of the box. The other image showing the 2 plates, shows 5101 but it is not the same landing pad as the box.
|
The box shown is the 1983 version of the packaging, which is when part 6099p03
was introduced. The original 1979 packaging shows 6099px2.
It's probable that somewhere between 1979 and 1983 the set shipped with 6099pb01,
but I haven't found evidence for this as yet.
|
|
| Author: | kevbar | | Posted: | Feb 11, 2020 16:57 | | Subject: | Inventory Change Request for Set 454-1 | | Viewed: | 30 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Delete 1 Part 6099px2 Light Gray Baseplate, Road 32 x 32 9-Stud Landing Pad with Yellow Circle, 1-way Lines Pattern (match ID 1)
Comments from Submitter:
6099p03 is shown as a alternative item but it is the regular as seen in the picture of the box. The other image showing the 2 plates, shows 5101 but it is not the same landing pad as the box.
|
| Author: | stutrippant | | Posted: | Feb 11, 2020 15:00 | | Subject: | Re: Can't find a modified brick (reverse of 2458) | | Viewed: | 76 times | | Topic: | Catalog | |
| In Catalog, Surplus writes:
That's the chap, thank you!
|
| Author: | BrickenbergNC | | Posted: | Feb 11, 2020 14:56 | | Subject: | Re: Can't find a modified brick (reverse of 2458) | | Viewed: | 57 times | | Topic: | Catalog | |
| In Catalog, stutrippant writes:
| | Hello, I'm sure the part exists but can't find it in the modified bricks.
I'm looking for the reverse of #2458 (1x2 with pin) a 1x2 brick with a hole
instead of a pin.
|
https://www.bricklink.com/v2/catalog/catalogitem.page?P=3700#T=P
|
| Author: | stutrippant | | Posted: | Feb 11, 2020 14:54 | | Subject: | Can't find a modified brick (reverse of 2458) | | Viewed: | 126 times | | Topic: | Catalog | | Status: | Open | |
| Hello, I'm sure the part exists but can't find it in the modified bricks.
I'm looking for the reverse of #2458 (1x2 with pin) a 1x2 brick with a hole
instead of a pin.
|
| Author: | gvbricks | | Posted: | Feb 11, 2020 13:38 | | Subject: | Inventory Change Request for Part 973pb3376c01 | | Viewed: | 25 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Change 2 Part {Dark Bluish Gray to Black} 983 Hand
|
| Author: | oukexergon | | Posted: | Feb 11, 2020 13:36 | | Subject: | Inventory Change Request for Set 76048-1 | | Viewed: | 21 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 45301pb044L Black Wedge 16 x 4 Triple Curved with Red Octopus (Marvel HYDRA Logo) Pattern Model Left Side (Sticker) - Set 76048 (Counterpart)
* Add 1 Part 45301pb044R Black Wedge 16 x 4 Triple Curved with Red Octopus (Marvel HYDRA Logo) Pattern Model Right Side (Sticker) - Set 76048 (Counterpart)
|
|
| Author: | Skumby | | Posted: | Feb 11, 2020 12:21 | | Subject: | add a stickered piece to the catalog | | Viewed: | 51 times | | Topic: | Catalog | | Status: | Open | |
| Forgive me if this is in the wrong place, but I have no idea how this works.
I have a stickered piece from this set:
https://www.bricklink.com/v2/catalog/catalogitem.page?S=70909
That does not seem to exist in the catalog. How do I go about adding it or telling
someone to add it? Thanks!
|
| Author: | Harald1643 | | Posted: | Feb 11, 2020 12:05 | | Subject: | Inventory Change Request for Set 76076-1 | | Viewed: | 21 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 2 Part 3062b Trans-Light Blue Brick, Round 1 x 1 Open Stud
|
| Author: | SezaR | | Posted: | Feb 11, 2020 05:07 | | Subject: | Re: Inventory Change Request for Set 165-1 | | Viewed: | 25 times | | Topic: | Inventories Requests | |
| In Inventories Requests, SezaR writes:
| | Please make changes to the following inventory:
* Change {11 to 10} Part Red 3009 Brick 1 x 6
* Change {8 to 9} Part Red 3008 Brick 1 x 8
|
Red brick
appears on the following steps:
1 on step 4
1 on step 5
1 on step 6
4 on step 7
1 on step 8
1 on step 9
1 on step 10
Total=10
Red brick
appears on the following steps:
3 on step 9
4 on step 10
2 on step 11
Total=11
|
|
| Author: | SezaR | | Posted: | Feb 11, 2020 05:04 | | Subject: | Inventory Change Request for Set 165-1 | | Viewed: | 35 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Change {11 to 10} Part Red 3009 Brick 1 x 6
* Change {8 to 9} Part Red 3008 Brick 1 x 8
|
|
| Author: | Admin_Russell | | Posted: | Feb 10, 2020 16:49 | | Subject: | Re: Inventory change on minifig | | Viewed: | 48 times | | Topic: | Inventories | |
| In Inventories, FreeStorm writes:
| | In Inventories, Admin_Russell writes:
| | ...there are two different versions of instructions, showing two different sticker
configurations. It is likely that both minifigures in the catalog are correct.
|
Should we add a note to set 641-1 to explain that it can come with different
instruction and sticker sheet?
How can I modify inventory for minifig?
You can see the problem there:
https://www.bricklink.com/catalogItemIn.asp?P=3840pb01&in=M
|
Actually, I mispoke. It's this set here:
There is a note about the change in parts, but without having two sticker entries
confirmed for that set, it would be hard to add the sticker info into the two
"versions".
The problem with this set is there is a lack of evidence. You can look up on
swooshable to see some other things I've written about it there.
|
|
| Author: | FreeStorm | | Posted: | Feb 10, 2020 16:16 | | Subject: | Re: Inventory change on minifig | | Viewed: | 33 times | | Topic: | Inventories | |
| In Inventories, Admin_Russell writes:
| | ...there are two different versions of instructions, showing two different sticker
configurations. It is likely that both minifigures in the catalog are correct.
|
Should we add a note to set 641-1 to explain that it can come with different
instruction and sticker sheet?
How can I modify inventory for minifig?
You can see the problem there:
https://www.bricklink.com/catalogItemIn.asp?P=3840pb01&in=M
|
|
| Author: | Admin_Russell | | Posted: | Feb 10, 2020 15:33 | | Subject: | Re: Inventory change on minifig | | Viewed: | 47 times | | Topic: | Inventories | |
| In Inventories, FreeStorm writes:
| | In Inventories, FreeStorm writes:
| | In Inventories, randyf writes:
| | In Inventories, FreeStorm writes:
| | What is the procedure when the inventory of a minifig is wrong?
Should I make the inventory change request like with set, or create a new minifig
and mark for deletion the older one?
Of course, the picture is also wrong.
-Fred
|
Which minifig?
|
|
and
[m=con004]
[m=con007]
Sticker on one side only of the vest (if sticker sheet is the right one):
[m=pln056]
|
Just be aware that the issue with those early stickers is really tricky. For
that one power shovel set you referenced:
https://www.bricklink.com/message.asp?ID=1179905
...there are two different versions of instructions, showing two different sticker
configurations. It is likely that both minifigures in the catalog are correct.
|
|
| Author: | FreeStorm | | Posted: | Feb 10, 2020 15:28 | | Subject: | Re: Inventory change on minifig | | Viewed: | 32 times | | Topic: | Inventories | |
| In Inventories, FreeStorm writes:
| | In Inventories, randyf writes:
| | In Inventories, FreeStorm writes:
| | What is the procedure when the inventory of a minifig is wrong?
Should I make the inventory change request like with set, or create a new minifig
and mark for deletion the older one?
Of course, the picture is also wrong.
-Fred
|
Which minifig?
|
|
and
[m=con004]
[m=con007]
Sticker on one side only of the vest (if sticker sheet is the right one):
[m=pln056]
|
|
| Author: | FreeStorm | | Posted: | Feb 10, 2020 15:15 | | Subject: | Re: Inventory change on minifig | | Viewed: | 40 times | | Topic: | Inventories | |
| In Inventories, randyf writes:
| | In Inventories, FreeStorm writes:
| | What is the procedure when the inventory of a minifig is wrong?
Should I make the inventory change request like with set, or create a new minifig
and mark for deletion the older one?
Of course, the picture is also wrong.
-Fred
|
Which minifig?
|
|
| Author: | randyf | | Posted: | Feb 10, 2020 15:11 | | Subject: | Re: Inventory change on minifig | | Viewed: | 38 times | | Topic: | Inventories | |
| In Inventories, FreeStorm writes:
| | What is the procedure when the inventory of a minifig is wrong?
Should I make the inventory change request like with set, or create a new minifig
and mark for deletion the older one?
Of course, the picture is also wrong.
-Fred
|
Which minifig?
|
| Author: | FreeStorm | | Posted: | Feb 10, 2020 15:08 | | Subject: | Inventory change on minifig | | Viewed: | 74 times | | Topic: | Inventories | | Status: | Open | |
| What is the procedure when the inventory of a minifig is wrong?
Should I make the inventory change request like with set, or create a new minifig
and mark for deletion the older one?
Of course, the picture is also wrong.
-Fred
|
| Author: | anathema | | Posted: | Feb 10, 2020 14:41 | | Subject: | Re: Inventory Change Request for Set 8847-1 | | Viewed: | 24 times | | Topic: | Inventories Requests | |
| In Inventories Requests, anathema writes:
| | Please make changes to the following inventory:
* Change 1 Part {White to Light Gray} 3701 Technic, Brick 1 x 4 with Holes {Alternate to Regular}
|
My bad, I accidentally left the setting on 'Regular' before submitting
- this should still be an 'Alternate' part.
Mind you, it would help if this field - like all the others - did not have a
default value...
|
|
| Author: | anathema | | Posted: | Feb 10, 2020 14:39 | | Subject: | Re: Inventory Change Request for Set 8847-1 | | Viewed: | 34 times | | Topic: | Inventories Requests | |
| In Inventories Requests, anathema writes:
| | Please make changes to the following inventory:
* Change 1 Part {White to Light Gray} 3701 Technic, Brick 1 x 4 with Holes {Alternate to Regular}
Comments from Submitter:
The second version of the instructions shows this part as light grey.
|
|
|
| Author: | anathema | | Posted: | Feb 10, 2020 14:38 | | Subject: | Inventory Change Request for Set 8847-1 | | Viewed: | 51 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Change 1 Part {White to Light Gray} 3701 Technic, Brick 1 x 4 with Holes {Alternate to Regular}
Comments from Submitter:
The second version of the instructions shows this part as light grey.
|
|
| Author: | StormChaser | | Posted: | Feb 10, 2020 13:42 | | Subject: | Re: February Roadmap Project: Old and New | | Viewed: | 57 times | | Topic: | Catalog | |
| In Catalog, StormChaser writes:
| | I'm not sure how we're going to do item numbers yet, so hold off on
those.
|
Okay, so we won't be changing item numbers at the moment. I have added that
portion of the project to the Catalog Roadmap (currently item 30):
https://www.bricklink.com/help.asp?helpID=2476
We also will not address Type 1/Type 2 items with this project. That has been
added as a separate project.
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|
)
)
