Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies Author: | MusicCityBlocks | Posted: | Sep 2, 2019 21:23 | Subject: | Re: Help with color | Viewed: | 23 times | Topic: | Colors | |
| In Colors, detroitbricks writes:
| I have a part 30602 and I'm trying to figure the correct color. I believe
it to be copper since it's the only known color that makes sense. I have
added a copper color part to show the color difference.
|
I'm sure that is copper. If you look at the "known colors" for that part
the only one that is even close is copper. I'm sure it's just a different
batch or age.
|
|
Author: | randyf | Posted: | Sep 2, 2019 21:22 | Subject: | Re: Color Identification | Viewed: | 35 times | Topic: | Colors | |
| In Colors, antiquer88 writes:
| I need some help identifying the color of the Bionicle mask on the right. It
is part #32573. It came in a large lot of used Bionicle parts, so I don't
know what set it came from originally. Supposedly, it only comes in Black, Blue,
Dark Gray, Light Gray, Lime, Medium Blue, Orange, Tan, Yellow, Copper, and Pearl
Light Gray.
As you can see, this is not any of those colors. I have photographed it with
a copper part next to it, so you can see that it is not copper. The closest
I can figure is that this is chrome pink, but there is nothing chrome about it.
It is more like a pearl dark pink color.
What color do you think it is?
I appreciate your help.
Stan.
|
This mask is actually a LEGO color known as "Red Flip/Flop" and was only used
for the two Bionicle masks shown in
https://www.flickr.com/photos/126975831@N07/15123159082/
The LEGO color "Red Flip/Flop" does not have a specific color on BrickLink and
is lumped under "Copper" since there is no other color close to it.
Cheers,
Randy
|
|
Author: | DeLuca | Posted: | Sep 2, 2019 21:21 | Subject: | Re: Help with color | Viewed: | 24 times | Topic: | Colors | |
| In Colors, detroitbricks writes:
| I have a part 30602 and I'm trying to figure the correct color. I believe it to be copper since it's the only known color that makes sense. I have added a copper color part to show the color difference.
|
These parts are Copper. See attached thread for details:
https://www.bricklink.com/messageThread.asp?ID=256884&nID=1155374
|
Author: | detroitbricks | Posted: | Sep 2, 2019 20:54 | Subject: | Help with color | Viewed: | 93 times | Topic: | Colors | Status: | Open | |
| I have a part 30602 and I'm trying to figure the correct color. I believe
it to be copper since it's the only known color that makes sense. I have
added a copper color part to show the color difference.
|
|
Author: | DeLuca | Posted: | Sep 2, 2019 19:39 | Subject: | Re: Color Identification | Viewed: | 29 times | Topic: | Colors | |
| In Colors, antiquer88 writes:
| So, I should list it as copper that has darkened over time?
|
When I said "over time", I meant that LEGO periodically changes their colours
slightly, not that the part has discoloured. (One example of colour-change-over-time
is Pearl Gold, with older elements tending to be lighter and newer ones tending
to be darker - But all variations still considered "Pearl Gold").
This part is Copper, but 2001 Copper is darker than 2019 (or 2006) Copper.
|
|
Author: | popsicle | Posted: | Sep 2, 2019 19:29 | Subject: | Re: Color Identification | Viewed: | 36 times | Topic: | Colors | |
| In Colors, DeLuca writes:
| In Colors, antiquer88 writes:
| I need some help identifying the color of the Bionicle mask on the right. It
is part #32573. It came in a large lot of used Bionicle parts, so I don't
know what set it came from originally. Supposedly, it only comes in Black, Blue,
Dark Gray, Light Gray, Lime, Medium Blue, Orange, Tan, Yellow, Copper, and Pearl
Light Gray.
As you can see, this is not any of those colors. I have photographed it with
a copper part next to it, so you can see that it is not copper. The closest
I can figure is that this is chrome pink, but there is nothing chrome about it.
It is more like a pearl dark pink color.
What color do you think it is?
I appreciate your help.
Stan.
|
The set in which this part appears (bilmasks-1) was released in 2001, while the
Exo-Force robots were first released in 2006. Colours (particularly Pearl-type)
tend to change somewhat over time, and the description for set (bilmasks-1) specifies
that the colour is dark Copper:
|
I think I've expressed this before, but it's worth repeating: Impressive
catalog command!
|
|
Author: | Brick_a_mind | Posted: | Sep 2, 2019 18:37 | Subject: | Re: Color Identification | Viewed: | 26 times | Topic: | Colors | |
| Thanks for your help! |
Author: | Teup | Posted: | Sep 2, 2019 18:27 | Subject: | Re: download as XML actually saves as a TXT file | Viewed: | 26 times | Topic: | Inventories | |
| In Inventories, Jallington59 writes:
| Hi,
Trying to export my inventory into an xML file.
The download option offers XML as a format, but when the file saves, it is a
.txt file.
I cannot use TXT files with other sites so I need to know if there is a way to
truly pull my inventory as XML.
thanks
|
XML is not a file type, it just refers to a way to structure data in plain text.
It only means that item data is placed in between tags with pointy brackets.
A file in XML formatting can have any kind of extension: txt, xls, html, ...
If you need another extension, you can just rename the file. If that doesn't
work, then probably you need something else than an XML formatted file. What
do you need it for?
|
|
Author: | Brick_a_mind | Posted: | Sep 2, 2019 18:25 | Subject: | Re: Color Identification | Viewed: | 25 times | Topic: | Colors | |
| So, I should list it as copper that has darkened over time? |
|
Author: | DeLuca | Posted: | Sep 2, 2019 18:16 | Subject: | Re: Color Identification | Viewed: | 34 times | Topic: | Colors | |
| In Colors, antiquer88 writes:
| I need some help identifying the color of the Bionicle mask on the right. It
is part #32573. It came in a large lot of used Bionicle parts, so I don't
know what set it came from originally. Supposedly, it only comes in Black, Blue,
Dark Gray, Light Gray, Lime, Medium Blue, Orange, Tan, Yellow, Copper, and Pearl
Light Gray.
As you can see, this is not any of those colors. I have photographed it with
a copper part next to it, so you can see that it is not copper. The closest
I can figure is that this is chrome pink, but there is nothing chrome about it.
It is more like a pearl dark pink color.
What color do you think it is?
I appreciate your help.
Stan.
|
The set in which this part appears (bilmasks-1) was released in 2001, while the
Exo-Force robots were first released in 2006. Colours (particularly Pearl-type)
tend to change somewhat over time, and the description for set (bilmasks-1) specifies
that the colour is dark Copper:
|
|
Author: | Brick_a_mind | Posted: | Sep 2, 2019 18:03 | Subject: | Color Identification | Viewed: | 111 times | Topic: | Colors | Status: | Open | |
| I need some help identifying the color of the Bionicle mask on the right. It
is part #32573. It came in a large lot of used Bionicle parts, so I don't
know what set it came from originally. Supposedly, it only comes in Black, Blue,
Dark Gray, Light Gray, Lime, Medium Blue, Orange, Tan, Yellow, Copper, and Pearl
Light Gray.
As you can see, this is not any of those colors. I have photographed it with
a copper part next to it, so you can see that it is not copper. The closest
I can figure is that this is chrome pink, but there is nothing chrome about it.
It is more like a pearl dark pink color.
What color do you think it is?
I appreciate your help.
Stan.
|
|
|
Author: | Jallington59 | Posted: | Sep 2, 2019 17:34 | Subject: | download as XML actually saves as a TXT file | Viewed: | 39 times | Topic: | Inventories | Status: | Open | |
| Hi,
Trying to export my inventory into an xML file.
The download option offers XML as a format, but when the file saves, it is a
.txt file.
I cannot use TXT files with other sites so I need to know if there is a way to
truly pull my inventory as XML.
thanks
|
Author: | axaday | Posted: | Sep 2, 2019 17:31 | Subject: | Inventory Change Request for Set 3142-1 | Viewed: | 21 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 1 Part {Blue to Violet} scl062 Scala, Clothes Female Pants with Two Pockets
Comments from Submitter:
Randy suspected, I confirm
|
Author: | samsam2 | Posted: | Sep 2, 2019 16:59 | Subject: | Inventory Change Request for Set 70009-1 | Viewed: | 21 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 61678pb119 White Slope, Curved 4 x 1 No Studs with 4 Large Scratches Pattern 3 (Sticker) - Set 70009 (Counterpart)
* Add 1 Part 61678pb118 White Slope, Curved 4 x 1 No Studs with 4 Large Scratches Pattern 2 (Sticker) - Set 70009 (Counterpart)
|
Author: | bricks_canada | Posted: | Sep 2, 2019 16:36 | Subject: | Inventory Change Request for Set 5973-1 | Viewed: | 19 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 2 Part 2431pb151 Black Tile 1 x 4 with Gray Circles and Rectangles Pattern (Sticker) - Set 5973 (Counterpart)
Comments from Submitter:
this part with the sticker is of quantity: 2
|
|
Author: | Turez | Posted: | Sep 2, 2019 15:29 | Subject: | Re: Inventory Change Request for Set 6273-1 | Viewed: | 33 times | Topic: | Inventories Requests | |
| In Inventories Requests, neoleg writes:
| Please make changes to the following inventory:
* Change 1 Part Brown {4738a Container, Treasure Chest Bottom - Slots in Back to 4738b Container, Treasure Chest Bottom - No Slots in Back}
* Change 1 Part Brown {4739a Container, Treasure Chest Lid - Thick Hinge to 4739b Container, Treasure Chest Lid - Thin Hinge}
* Change 1 Part Brown {4738ac01 Container, Treasure Chest Bottom - Slots in Back with Same Color Container, Treasure Chest Lid - Thick Hinge (4738a / 4739a) to 4738bc01 Container, Treasure Chest Bottom - No Slots in Back with Same Color Container, Treasure Chest Lid - Thin Hinge (4738b / 4739b)} (Counterpart)
Comments from Submitter:
My set actually contains the old style (B) treasure chest with no back slots and thin hinge. Confirmed by actual inventory and product photos on box/instructions. (Are there alternate versions?)
|
Hi,
I am very sure that this set came with the "a" variant for two reasons:
1. Set 6273 was produced between 1991 and 1993. Set 6260 was produced between
1989 and 1991 and that set already had the "a" variant (link below).
2. A few years ago, the user 1977_mauro changed the inventory of 6273 and many
other old sets based on sealed set contents (he added extra parts or string lenghts,
for example). As we can see, he has not changed the treasure chest in the inventory
of set 6273 but he has changed it in other inventories. I am sure he would have
also changed it here if he had found the "b" type in his copy.
All in all, the "a" type should stay here but the "b" type can be added as an
alternate if you confirm that you have found it in a sealed set.
Regards,
Jonas
http://www.brickshelf.com/cgi-bin/gallery.cgi?i=5646959
https://www.bricklink.com/catalogInvChangeItem.asp?nID=72474&nDate=12%2F2%2F2012&viewType=E&viewStatus=A&chgUserID=148415&viewDate=Y
https://www.bricklink.com/message.asp?ID=1116713
https://www.bricklink.com/catalogInvChangeItem.asp?itemType=S&itemNo=6273-1&viewDate=Y&viewStatus=1
|
|
Author: | axaday | Posted: | Sep 2, 2019 15:09 | Subject: | Inventory Change Request for Set 3142-1 | Viewed: | 15 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part x23pb04 (Not Applicable) Scala Cloth Pillow Small with Blue and Multicolor Stripe Sides Pattern
* Add 1 Part x23pb05 (Not Applicable) Scala Cloth Pillow Small with Orange and Dark Pink Sides
* Delete 1 Part x23 Blue Scala Cloth Pillow Small
* Delete 1 Part x23 Purple Scala Cloth Pillow Small
* Add 1 Part bb972 Light Turquoise Scala Handle for Wicker Basket
* Add 1 Part 33081 Light Turquoise Scala Utensil Wicker Basket
* Add 1 Part 3142stk03 (Not Applicable) Sticker for Set 3142 - Sheet 3 (22272/4125337)
* Add 1 Part 3142stk02 (Not Applicable) Sticker for Set 3142, Mirrored - Sheet 2 (71503/4107189)
|
|
Author: | axaday | Posted: | Sep 2, 2019 15:03 | Subject: | Inventory Change Request for Set 5845-1 | Viewed: | 15 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 4073 Trans-Red Plate, Round 1 x 1 Straight Side (Extra)
Comments from Submitter:
There was an extra in my sealed set.
|
Author: | axaday | Posted: | Sep 2, 2019 14:23 | Subject: | Inventory Change Request for Set 3142-1 | Viewed: | 20 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 1 Part {Light Turquoise to Dark Turquoise} 4865 Panel 1 x 2 x 1
* Change 1 Part {Dark Pink to Light Purple} ScalaShowerStan Scala Shower Stand / Lamp Post
Comments from Submitter:
More changes to come
|
Author: | Leinorbert | Posted: | Sep 2, 2019 14:07 | Subject: | Inventory Change Request for Set 75105-1 | Viewed: | 19 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 3039pb125 Black Slope 45 2 x 2 with SW Millennium Falcon Control Panel Pattern (Sticker) - Set 75105 (Counterpart)
|
|
Author: | randyf | Posted: | Sep 2, 2019 13:58 | Subject: | Re: Inventory Change Request for Set 70723-1 | Viewed: | 21 times | Topic: | Inventories Requests | |
| In Inventories Requests, Brixalotl writes:
| In Inventories Requests, randyf writes:
| In Inventories Requests, Brixalotl writes:
| Please make changes to the following inventory:
* Add 1 Part 17114 Dark Brown Technic, Brick Modified 2 x 2 with Balls with Holes and Axle Hole (Alternate) (match ID 4)
* Add 2 Part 21459 Pearl Gold Minifigure, Weapon Sword, Shamshir/Katana (Square Guard) with Capped Pommel and Holes in Crossguard and Blade (Alternate) (match ID 5)
* Change 1 Part Dark Brown 57908 Technic, Brick Modified 2 x 2 with Balls {match ID 0 to 4}
* Change 2 Part Pearl Gold 30173b Minifigure, Weapon Sword, Shamshir/Katana (Square Guard) with Uncapped Pommel and Hole in Hilt {match ID 0 to 5}
Comments from Submitter:
found variants during part out, thanks
|
Did you have an extra pearl gold katana in your set?
Thanks,
Randy
|
Yes, the extra part quantities matched the current inventory
|
Thank you. I updated the inventory to contain the alternate extra.
Cheers,
Randy
|
|
Author: | randyf | Posted: | Sep 2, 2019 13:45 | Subject: | Re: Inventory Change Request for Set 70722-1 | Viewed: | 19 times | Topic: | Inventories Requests | |
| In Inventories Requests, Brixalotl writes:
| In Inventories Requests, randyf writes:
| In Inventories Requests, Brixalotl writes:
| Please make changes to the following inventory:
* Add 2 Part 21459 Pearl Gold Minifigure, Weapon Sword, Shamshir/Katana (Square Guard) with Capped Pommel and Holes in Crossguard and Blade (Alternate) (match ID 1)
* Change 2 Part Pearl Gold 30173b Minifigure, Weapon Sword, Shamshir/Katana (Square Guard) with Uncapped Pommel and Hole in Hilt {match ID 0 to 1}
Comments from Submitter:
found variant during part out, thanks
|
Did you have an extra pearl gold katana in your set?
Thanks,
Randy
|
Yes, the extra quantities matches the current inventory.
|
Thank you. I updated the inventory to contain the alternate extra.
Cheers,
Randy
|
|
Author: | Brixalotl | Posted: | Sep 2, 2019 13:11 | Subject: | Re: Inventory Change Request for Set 70723-1 | Viewed: | 18 times | Topic: | Inventories Requests | |
| In Inventories Requests, randyf writes:
| In Inventories Requests, Brixalotl writes:
| Please make changes to the following inventory:
* Add 1 Part 17114 Dark Brown Technic, Brick Modified 2 x 2 with Balls with Holes and Axle Hole (Alternate) (match ID 4)
* Add 2 Part 21459 Pearl Gold Minifigure, Weapon Sword, Shamshir/Katana (Square Guard) with Capped Pommel and Holes in Crossguard and Blade (Alternate) (match ID 5)
* Change 1 Part Dark Brown 57908 Technic, Brick Modified 2 x 2 with Balls {match ID 0 to 4}
* Change 2 Part Pearl Gold 30173b Minifigure, Weapon Sword, Shamshir/Katana (Square Guard) with Uncapped Pommel and Hole in Hilt {match ID 0 to 5}
Comments from Submitter:
found variants during part out, thanks
|
Did you have an extra pearl gold katana in your set?
Thanks,
Randy
|
Yes, the extra part quantities matched the current inventory
|
|
Author: | Brixalotl | Posted: | Sep 2, 2019 13:10 | Subject: | Re: Inventory Change Request for Set 70722-1 | Viewed: | 16 times | Topic: | Inventories Requests | |
| In Inventories Requests, randyf writes:
| In Inventories Requests, Brixalotl writes:
| Please make changes to the following inventory:
* Add 2 Part 21459 Pearl Gold Minifigure, Weapon Sword, Shamshir/Katana (Square Guard) with Capped Pommel and Holes in Crossguard and Blade (Alternate) (match ID 1)
* Change 2 Part Pearl Gold 30173b Minifigure, Weapon Sword, Shamshir/Katana (Square Guard) with Uncapped Pommel and Hole in Hilt {match ID 0 to 1}
Comments from Submitter:
found variant during part out, thanks
|
Did you have an extra pearl gold katana in your set?
Thanks,
Randy
|
Yes, the extra quantities matches the current inventory.
|
|
Author: | randyf | Posted: | Sep 2, 2019 12:29 | Subject: | Re: Inventory Change Request for Set 70722-1 | Viewed: | 16 times | Topic: | Inventories Requests | |
| In Inventories Requests, Brixalotl writes:
| Please make changes to the following inventory:
* Add 2 Part 21459 Pearl Gold Minifigure, Weapon Sword, Shamshir/Katana (Square Guard) with Capped Pommel and Holes in Crossguard and Blade (Alternate) (match ID 1)
* Change 2 Part Pearl Gold 30173b Minifigure, Weapon Sword, Shamshir/Katana (Square Guard) with Uncapped Pommel and Hole in Hilt {match ID 0 to 1}
Comments from Submitter:
found variant during part out, thanks
|
Did you have an extra pearl gold katana in your set?
Thanks,
Randy
|
|
Author: | randyf | Posted: | Sep 2, 2019 12:28 | Subject: | Re: Inventory Change Request for Set 70723-1 | Viewed: | 16 times | Topic: | Inventories Requests | |
| In Inventories Requests, Brixalotl writes:
| Please make changes to the following inventory:
* Add 1 Part 17114 Dark Brown Technic, Brick Modified 2 x 2 with Balls with Holes and Axle Hole (Alternate) (match ID 4)
* Add 2 Part 21459 Pearl Gold Minifigure, Weapon Sword, Shamshir/Katana (Square Guard) with Capped Pommel and Holes in Crossguard and Blade (Alternate) (match ID 5)
* Change 1 Part Dark Brown 57908 Technic, Brick Modified 2 x 2 with Balls {match ID 0 to 4}
* Change 2 Part Pearl Gold 30173b Minifigure, Weapon Sword, Shamshir/Katana (Square Guard) with Uncapped Pommel and Hole in Hilt {match ID 0 to 5}
Comments from Submitter:
found variants during part out, thanks
|
Did you have an extra pearl gold katana in your set?
Thanks,
Randy
|
|
Author: | yorbrick | Posted: | Sep 2, 2019 06:45 | Subject: | Re: Elements Exclusive to BaM | Viewed: | 57 times | Topic: | Catalog | |
| In Catalog, constructibles writes:
| Just to add to the never-ending "identify this part" questions, it's now
been semi-officially confirmed that LEGO has created exclusive elements for the
BaM (Build a Minifgure) bins in LBR stores. I'm sure this will give more
people headaches for authenticating parts, since they will not appear in any
inventories. Looks interesting though, and I hope they keep introducing new
elements.
|
It looks like there are other exclsuive parts that are going to cause some confusion.
These pics are on eurobricks. Look at the vampire torso, very similar to Lord
Vampyre's but a different colour waistcoat and tie. So a BAM exclusive that
will probably be confused with an existing one.
The spiderwoman - look at the large spider print, it used to be located lower
and was printed across the torso and dress. So that's another two parts very
similar to existing ones from sets but exclusive to BAM.
|
|
|
Author: | axaday | Posted: | Sep 2, 2019 00:25 | Subject: | Re: Inventory Change Request for Set 3142-1 | Viewed: | 21 times | Topic: | Inventories Requests | |
| In Inventories Requests, axaday writes:
| Please make changes to the following inventory:
* Add 1 Part 3062b Brown Brick, Round 1 x 1 Open Stud
* Add 1 Part 4073 Black Plate, Round 1 x 1 Straight Side (Extra)
* Add 1 Part 4592c02 Red Lever Small Base with Black Lever (Extra)
* Add 1 Part 4073 Trans-Clear Plate, Round 1 x 1 Straight Side (Extra)
* Add 1 Part 4073 Trans-Yellow Plate, Round 1 x 1 Straight Side (Extra)
* Add 1 Part sc004 Trans-Red Scala, Clothes Sunglasses (Extra)
* Delete 1 Part 33267a White Scala Support Tall, Type 1 (connector locating hole on smooth side) - 25.5 Studs Long
* Delete 3 Part 3003 Yellow Brick 2 x 2
* Add 1 Part 30145 Yellow Brick 2 x 2 x 3
* Add 1 Part 3069b Dark Turquoise Tile 1 x 2 with Groove
* Add 1 Part x16 Yellow Scala Utensil Hairbrush
* Add 4 Part x151 Yellow Rubber Band Extra Small (Square Cross Section)
* Add 1 Part x151 Yellow Rubber Band Extra Small (Square Cross Section) (Extra)
* Change {2 to 1} Part Black 3062b Brick, Round 1 x 1 Open Stud
* Change 1 Part Light Turquoise 33081c01 Scala Utensil Wicker Basket with Handle {Regular to Counterpart}
Comments from Submitter:
I will also need to create two sticker sheets to fix this inventory.
Original inventory didn't have extras, mistook a brown piece for another black one, added a large piece that I don't have and isn't in the instructions, included 3 2x2 bricks in place of one tall 2x2 brick, and omitted several pieces that were present and in the instructions. I am moving the basket to counterpart because I will be inventorying it. The basket and handle came in separate bags in the set.
|
|
|
|
Author: | axaday | Posted: | Sep 2, 2019 00:23 | Subject: | Inventory Change Request for Set 3142-1 | Viewed: | 22 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 3062b Brown Brick, Round 1 x 1 Open Stud
* Add 1 Part 4073 Black Plate, Round 1 x 1 Straight Side (Extra)
* Add 1 Part 4592c02 Red Lever Small Base with Black Lever (Extra)
* Add 1 Part 4073 Trans-Clear Plate, Round 1 x 1 Straight Side (Extra)
* Add 1 Part 4073 Trans-Yellow Plate, Round 1 x 1 Straight Side (Extra)
* Add 1 Part sc004 Trans-Red Scala, Clothes Sunglasses (Extra)
* Delete 1 Part 33267a White Scala Support Tall, Type 1 (connector locating hole on smooth side) - 25.5 Studs Long
* Delete 3 Part 3003 Yellow Brick 2 x 2
* Add 1 Part 30145 Yellow Brick 2 x 2 x 3
* Add 1 Part 3069b Dark Turquoise Tile 1 x 2 with Groove
* Add 1 Part x16 Yellow Scala Utensil Hairbrush
* Add 4 Part x151 Yellow Rubber Band Extra Small (Square Cross Section)
* Add 1 Part x151 Yellow Rubber Band Extra Small (Square Cross Section) (Extra)
* Change {2 to 1} Part Black 3062b Brick, Round 1 x 1 Open Stud
* Change 1 Part Light Turquoise 33081c01 Scala Utensil Wicker Basket with Handle {Regular to Counterpart}
Comments from Submitter:
I will also need to create two sticker sheets to fix this inventory.
Original inventory didn't have extras, mistook a brown piece for another black one, added a large piece that I don't have and isn't in the instructions, included 3 2x2 bricks in place of one tall 2x2 brick, and omitted several pieces that were present and in the instructions. I am moving the basket to counterpart because I will be inventorying it. The basket and handle came in separate bags in the set.
|
|
|