BrickLink Discussion Forum

In Catalog, Leftoverbricks writes:

In Catalog, Hygrotus writes:

In Catalog, Leftoverbricks writes:

For insight information please look here: http://www.newelementary.com/2019/10/lego-store-build-minifigure-exclusive-bam.html

Questions:
How are these parts 'handled' by the inventory admins?
Since many of these parts do not yet occur in regular sets, what's the BL
policy here?
What should we know when uploading new parts from BaM?

TL;DR
BaM = Build a Minifigure, an option to build a minifig in an official LEGO brand
store. You can choose from a collection of heads, legs, torso's, hair and
minifig utensils. Some of them were never released before in official sets.

970c00pb1015 Hips and Legs with Purple and Black Bats and Pumpkins Pattern (BAM)
Parts: Minifigure, Legs, Decorated

973pb3678c01 (Inv) Torso Black Cat on Orange Moon Background and Bats Pattern (BAM) / Black Arms / Yellow Hands
Parts: Minifigure, Torso Assembly, Decor.

3626cpb2485 Minifigure, Head Pumpkin Jack O' Lantern with Yellow Outlines Pattern - Hollow Stud (BAM)
Parts: Minifigure, Head

[p=18746pb005]

26078pb003 Dog, Terrier with Black Eyes and Nose on Gray Background Pattern (BAM)
Parts: Animal, Land

When we know that part is only from that source a note is added.

Parts existing alredy in the catalog but in different color have just added images
of those inw colors to existing entries.

20592pb02 Minifigure, Hair Female Mid-Length Flipped Ends, Short Bangs, with Black Cat Ears Pattern
Parts: Minifigure, Hair {Bright Light Yellow}

28798pb01 Minifigure, Hair Female Pigtails High Bouncy, Hole on Top with Black Hair on Left Side and Black Tie on Right Side Pattern
Parts: Minifigure, Hair {Orange}

As I see two from that link don't have added images yet

36036 Lower Body, Skirt
Parts: Minifigure, Legs, Modified {White}

- white

970c00pb0495 Hips and Legs with Molded Dark Brown Lower Legs / Boots Pattern
Parts: Minifigure, Legs, Decorated {Dark Blue}

- Dark Blue

Strangely: the last four parts are not found when you click on the part number
link.

It is a known bug
https://www.bricklink.com/message.asp?ID=1162195

Author:

Leftoverbricks

Posted:

Nov 17, 2019 04:00

Subject:

Re: How does BL handle new BaM parts?

Viewed:

67 times

Topic:

In Catalog, Hygrotus writes:

In Catalog, Leftoverbricks writes:

970c00pb1015 Hips and Legs with Purple and Black Bats and Pumpkins Pattern (BAM)
Parts: Minifigure, Legs, Decorated

973pb3678c01 (Inv) Torso Black Cat on Orange Moon Background and Bats Pattern (BAM) / Black Arms / Yellow Hands
Parts: Minifigure, Torso Assembly, Decor.

3626cpb2485 Minifigure, Head Pumpkin Jack O' Lantern with Yellow Outlines Pattern - Hollow Stud (BAM)
Parts: Minifigure, Head

[p=18746pb005]

26078pb003 Dog, Terrier with Black Eyes and Nose on Gray Background Pattern (BAM)
Parts: Animal, Land

When we know that part is only from that source a note is added.

Parts existing alredy in the catalog but in different color have just added images
of those inw colors to existing entries.

20592pb02 Minifigure, Hair Female Mid-Length Flipped Ends, Short Bangs, with Black Cat Ears Pattern
Parts: Minifigure, Hair {Bright Light Yellow}

28798pb01 Minifigure, Hair Female Pigtails High Bouncy, Hole on Top with Black Hair on Left Side and Black Tie on Right Side Pattern
Parts: Minifigure, Hair {Orange}

As I see two from that link don't have added images yet

36036 Lower Body, Skirt
Parts: Minifigure, Legs, Modified {White}

- white

970c00pb0495 Hips and Legs with Molded Dark Brown Lower Legs / Boots Pattern
Parts: Minifigure, Legs, Decorated {Dark Blue}

- Dark Blue

Strangely: the last four parts are not found when you click on the part number
link.

Author:

Hygrotus

Posted:

Nov 16, 2019 11:58

Subject:

Re: How does BL handle new BaM parts?

Viewed:

176 times

Topic:

In Catalog, Leftoverbricks writes:

970c00pb1015 Hips and Legs with Purple and Black Bats and Pumpkins Pattern (BAM)
Parts: Minifigure, Legs, Decorated

973pb3678c01 (Inv) Torso Black Cat on Orange Moon Background and Bats Pattern (BAM) / Black Arms / Yellow Hands
Parts: Minifigure, Torso Assembly, Decor.

3626cpb2485 Minifigure, Head Pumpkin Jack O' Lantern with Yellow Outlines Pattern - Hollow Stud (BAM)
Parts: Minifigure, Head

[p=18746pb005]

26078pb003 Dog, Terrier with Black Eyes and Nose on Gray Background Pattern (BAM)
Parts: Animal, Land

When we know that part is only from that source a note is added.

Parts existing alredy in the catalog but in different color have just added images
of those inw colors to existing entries.

20592pb02 Minifigure, Hair Female Mid-Length Flipped Ends, Short Bangs, with Black Cat Ears Pattern
Parts: Minifigure, Hair {Bright Light Yellow}

28798pb01 Minifigure, Hair Female Pigtails High Bouncy, Hole on Top with Black Hair on Left Side and Black Tie on Right Side Pattern
Parts: Minifigure, Hair {Orange}

As I see two from that link don't have added images yet

36036 Lower Body, Skirt
Parts: Minifigure, Legs, Modified {White}

- white

970c00pb0495 Hips and Legs with Molded Dark Brown Lower Legs / Boots Pattern
Parts: Minifigure, Legs, Decorated {Dark Blue}

- Dark Blue

Author:

Leftoverbricks

Posted:

Nov 16, 2019 11:37

Subject:

How does BL handle new BaM parts?

Viewed:

310 times

Topic:

Status:

Open

Author:

Gdgourou

Posted:

Nov 16, 2019 08:56

Subject:

Re: Variant of Poe Dameron Helmet

Viewed:

39 times

Topic:

In Catalog, Huskers1236 writes:

In Catalog, Gdgourou writes:

Hello I found a 75102 X-Wing with Poe Dameron but the helmet is strange. The
visor in not a transparent yellow but an opaque dark part colored in bright yellow.

That head looks all sorts of fake too. Printing is bad even from that angle.

Hy Huskers1236 , i check and only the helmet don't have a Lego mark molded
into the plastic... strange for a complete set full of lego stamped parts execpt
this helemet.
Thanks for the answer. Gdgourou

Author:

Gdgourou

Posted:

Nov 16, 2019 08:53

Subject:

Re: Variant of Poe Dameron Helmet

Viewed:

36 times

Topic:

In Catalog, randyf writes:

In Catalog, Gdgourou writes:

Hello I found a 75102 X-Wing with Poe Dameron but the helmet is strange. The
visor in not a transparent yellow but an opaque dark part colored in bright yellow.

Check inside the helmet for the LEGO brand name or copyright mark molded into
the plastic. If neither are there, it is definitely a clone.

Cheers,
Randy

Hy Randy, i check and only the helmet d'ont have a Lego mark molded into
the plastic... strange
Despite thanks for the answer. Gdgourou

Author:

misbi

Posted:

Nov 16, 2019 02:16

Subject:

Re: BL search with Goatleg fail

Viewed:

52 times

Topic:

In Catalog, mfav writes:

http://v4ei.com/mini-fig-ure-outer/index.php

You can roll your own search interface in about 2 hours. Make it do whatever
you want.

Nice 👍

Author:

nickdanger

Posted:

Nov 16, 2019 00:33

Subject:

Re: Sticker question

Viewed:

38 times

Topic:

In Catalog, starbeanie writes:

Gstk117 Sticker Sheet, Star Wars Minifigure Sheet, Limited Edition
Gear: Sticker Sheet: Star Wars

In Catalog, nickdanger writes:

Hello, is this sticker in the catalog somewhere? I cannot seem to find it. It
was a Star Wars promo in 2010.

Thank you!

Author:

Huskers1236

Posted:

Nov 15, 2019 22:57

Subject:

Re: Variant of Poe Dameron Helmet

Viewed:

46 times

Topic:

In Catalog, Gdgourou writes:

Hello I found a 75102 X-Wing with Poe Dameron but the helmet is strange. The
visor in not a transparent yellow but an opaque dark part colored in bright yellow.

That head looks all sorts of fake too. Printing is bad even from that angle.

Author:

dcarmine

Posted:

Nov 15, 2019 21:18

Subject:

Re: BL search with Goatleg fail

Viewed:

50 times

Topic:

In Catalog, 62Bricks writes:

In Catalog, dcarmine writes:

I loved the Goatleg search, when it was not attached to BL.

I go to goatleg.com, pick "legs Assembly" and it takes me to BL with a frame
at the top where I can choose the colors to search. There is no box to type
"other descriptions" to help narrow the field (it used to, and it does for torsos).

This is what I get when I searched Black Hips and Black Legs. One item and it
has blue hips.

The old goatleg was soooooo much better!!!! I don't know what happened with
the integration with BL, but it is not the same. It was originally made by 62bircks.

Can anyone tell me what I am doing wrong? Because there are a TON of legs Black/Black.

I blame BL. To 62bricks, I thank you for helping me with your program. I really
loved the way it worked when it was stand alone.

Donna

Got it - The results are not actually wrong, it's just a matter of how the
parts are named. The search looks for the hips by color code, and looks for the
legs by the title. So the search is only going to bring up leg assemblies that
have hips in black and that contain "black legs" in the item name.

As it happens, this is the only assembly in the catalog that meets both those
terms. If you look at the result, that assembly does indeed come with black hips
(as well as blue ones, which is the version in the main photo).

I'll look into adding a keyword search back into the leg assembly search,
but in this case it would not have changed the result.

Thank you. I really appreciate your help with this. I'm also glad to hear
that it's not tied to BL.

Donna

Author:

mfav

Posted:

Nov 15, 2019 19:06

Subject:

Re: BL search with Goatleg fail

Viewed:

52 times

Topic:

http://v4ei.com/mini-fig-ure-outer/index.php

You can roll your own search interface in about 2 hours. Make it do whatever
you want.

Author:

62Bricks

Posted:

Nov 15, 2019 19:00

Subject:

Re: BL search with Goatleg fail

Viewed:

49 times

Topic:

In Catalog, dcarmine writes:

Author:

62Bricks

Posted:

Nov 15, 2019 18:54

Subject:

Re: BL search with Goatleg fail

Viewed:

42 times

Topic:

In Catalog, dcarmine writes:

Hi - Goatleg is not attached or affiliated with BL at all.

I'm not sure why the results for this are not right. But I'll look into
it!

Author:

dcarmine

Posted:

Nov 15, 2019 18:03

Subject:

BL search with Goatleg fail

Viewed:

153 times

Topic:

Status:

Open

Author:

randyf

Posted:

Nov 15, 2019 13:50

Subject:

Re: Variant of Poe Dameron Helmet

Viewed:

37 times

Topic:

In Catalog, Gdgourou writes:

Hello I found a 75102 X-Wing with Poe Dameron but the helmet is strange. The
visor in not a transparent yellow but an opaque dark part colored in bright yellow.

Check inside the helmet for the LEGO brand name or copyright mark molded into
the plastic. If neither are there, it is definitely a clone.

Cheers,
Randy

Author:

Gdgourou

Posted:

Nov 15, 2019 13:31

Subject:

Variant of Poe Dameron Helmet

Viewed:

89 times

Topic:

Status:

Open

Hello I found a 75102 X-Wing with Poe Dameron but the helmet is strange. The
visor in not a transparent yellow but an opaque dark part colored in bright yellow.

Author:

Hygrotus

Posted:

Nov 11, 2019 07:18

Subject:

Re: Missing two sets on the Star Wars USC list

Viewed:

87 times

Topic:

In Suggestions, iprice writes:

In Suggestions, Hygrotus writes:

In Suggestions, HHell writes:

Hi,
You are missing two sets on the Catalog: Sets: Star Wars: Ultimate Collector
Series

Set: 10188-1 Star Wars Ultimate Collector Series from 2008 year

Set: 10236-1 Star Wars Ultimate Collector Series from 2013 year

It will be nice to see all of the Star Wars USC sets.

Kind regards,
Pawel

They do not belong to UCS series as they are not marked as such on the boxes.
btw here you have message from LEGO which this person recived when asked about
it.
https://lego.fandom.com/wiki/Thread:288611
Both sets are cosider playsets.

The same situation is with 75222-1

That's a strange response from Lego, especially as the 75159 Deathstar IS
a UCS set, despite being nigh-on identical to 10188. 75159 is UCS even without
the plaque...

Damned Lego inconsistencies!!!

https://brickset.com/article/38044/what-is-the-master-builder-series
Even better they created "Master Builder Series" specially fo sets like 75222.
Didn't heard about any more sets in this series anymore

Sentence from linked article
"In fact, browsing through the Ultimate Collector Series in the Brickset database
reveals that LEGO has been somewhat careless with the UCS branding throughout
its history. "

Author:

iprice

Posted:

Nov 11, 2019 07:08

Subject:

Re: Missing two sets on the Star Wars USC list

Viewed:

44 times

Topic:

In Suggestions, Hygrotus writes:

In Suggestions, HHell writes:

That's a strange response from Lego, especially as the 75159 Deathstar IS
a UCS set, despite being nigh-on identical to 10188. 75159 is UCS even without
the plaque...

Damned Lego inconsistencies!!!

Author:

Hygrotus

Posted:

Nov 11, 2019 06:44

Subject:

Re: Missing two sets on the Star Wars USC list

Viewed:

60 times

Topic:

In Suggestions, HHell writes:

Author:

HHell

Posted:

Nov 11, 2019 06:28

Subject:

Missing two sets on the Star Wars USC list

Viewed:

112 times

Topic:

Status:

Open

Author:

popsicle

Posted:

Nov 10, 2019 13:34

Subject:

Re: Sticker question

Viewed:

60 times

Topic:

In Catalog, starbeanie writes:

Gstk117 Sticker Sheet, Star Wars Minifigure Sheet, Limited Edition
Gear: Sticker Sheet: Star Wars

In Catalog, nickdanger writes:

Hello, is this sticker in the catalog somewhere? I cannot seem to find it. It
was a Star Wars promo in 2010.

For those that don't know, Bret (starbeanie) is what I consider our resident
expert on Lego stickers. He long ago started specializing at it (don't know
if you still do, Bret) But I couldn't find this item either and thought about
asking you. Glad you showed-up here to answer both the OP's my curiosities.

-Thanks

Author:

starbeanie

Posted:

Nov 10, 2019 13:16

Subject:

Re: Sticker question

Viewed:

42 times

Topic:

Gstk117 Sticker Sheet, Star Wars Minifigure Sheet, Limited Edition
Gear: Sticker Sheet: Star Wars

In Catalog, nickdanger writes:

Hello, is this sticker in the catalog somewhere? I cannot seem to find it. It
was a Star Wars promo in 2010.

Author:

randyf

Posted:

Nov 10, 2019 11:29

Subject:

Re: New item to add, but unsure how to name it

Viewed:

40 times

Topic:

In Catalog, aladar123 writes:

Hi,

I found an item that is missing from the catalog. I attached the image of it.
It is a dark blue 47753 with a sticker on it. The sticker is from the set: 70730
https://www.bricklink.com/v2/catalog/catalogitem.page?P=70730stk01&
I checked the instructions for the part and the sticker is applied as needed.

I have a few questions:
- What is the best name to give to the part?
- How to find what is the part number to use? 47753pb???

Thanks,
Tamas

Give this message a try and see if it can help you figure it out:

https://www.bricklink.com/message.asp?ID=1085264

If you are still confused by the process, someone will be happy to explain further.

Cheers,
Randy

Author:

mokibricks

Posted:

Nov 10, 2019 05:19

Subject:

New item to add, but unsure how to name it

Viewed:

87 times

Topic:

Status:

Open

Author:

nickdanger

Posted:

Nov 9, 2019 23:48

Subject:

Sticker question

Viewed:

125 times

Topic:

Status:

Open

Hello, is this sticker in the catalog somewhere? I cannot seem to find it. It
was a Star Wars promo in 2010.

Author:

Adjour

Posted:

Nov 5, 2019 20:45

Subject:

Re: Sticky/ oily vintage wheels...trash?

Viewed:

32 times

Topic:

In Help, randyf writes:

In Help, Adjour writes:

Anyone know why this happens? I notice the also melt the bricks they are sitting
against, so I'm presuming some sort of chemical reaction.

The LEGO wheels are most likely made from styrene-butadiene rubber (SBR). To
process SBR, plasticizers are usually added to it to help with the flow of the
material into the molds (they literally make the SBR more plastic). These plasticizers
usually include some type of mineral oil derived from petroleum and some type
of ester (a type of chemical compound). Over time, these plasticizers can leach
out of the SBR under certain storage conditions. You are most likely seeing and
feeling mostly the mineral oil, but I would absolutely think that the ester is
also leaching out with the mineral oil. Why? Because esters can dissolve ABS.

Cheers,
Randy

Great to know, thank you Randy

Visually, they absolutely look like they are covered in mineral oil. These were
not commingled (they were in a set box/clean) so they are not covered in dirt,
the others I encounter were covered in *stuff*

I've run into various amounts of the tacky feel, so I would imagine that
is the second compound coming out in various amounts.

Author:

randyf

Posted:

Nov 5, 2019 19:24

Subject:

Re: Sticky/ oily vintage wheels...trash?

Viewed:

41 times

Topic:

In Help, Adjour writes:

Anyone know why this happens? I notice the also melt the bricks they are sitting
against, so I'm presuming some sort of chemical reaction.

Author:

axaday

Posted:

Nov 5, 2019 14:02

Subject:

Re: Sticky/ oily vintage wheels...trash?

Viewed:

40 times

Topic:

In Help, Adjour writes:

Anyone know why this happens? I notice the also melt the bricks they are sitting
against, so I'm presuming some sort of chemical reaction.

I'm guessing heat? I've run into this 3 times now one the lots also had
heat warped baseplates. I've never seen it on my own/original lego which
has never experienced a hot garage.

Are they trash? Can I clean them?

I just got some

2346 Tire 30 x 10.5 Offset Tread
Parts: Wheel, Tire & Tread

in light grey and was pretty stoked (only came in 3
sets) and they are awful gooey messes, I have more on the way and I don't
want it to be a total loss. The weird color on a common part is so neat in person.

Thanks everyone

Crystal

I often find it in old, old sealed sets. Sometimes the tire is ruined and sometimes
I don't think so. I think it can be fixed with armor-all, but I just sell
them as-is with a comment.

Author:

Adjour

Posted:

Nov 5, 2019 12:45

Subject:

Re: Sticky/ oily vintage wheels...trash?

Viewed:

33 times

Topic:

In Help, runner.caller writes:

In Help, Adjour writes:

2346 Tire 30 x 10.5 Offset Tread
Parts: Wheel, Tire & Tread

Weird! I've encountered oily tires before, but just assumed it was a coating
to help them pop out of the mold at the factory or a light coating to help guard
against dry rot.

I've seen the leaching before in my fishing tackle box when old plastic "twister
tails" would start to leach through the plastic baggies and even start to melt
the plastic in the utility box they were inside.

I didn't know this could happen to lego tires too!? Makes me nervous about
my stored childhood sets.

So too much air, and they dry out and get dry-rot, not enough, and they melt.

Nice....

I'll note that the tackle box spent many a thermal cycle in a garage, whereas
the lego temps have always been more stable.

Don't stress too much, I have TONS of old tires and I've only found this
buying lego from people who were obviously not collectors. I strongly suspect
some sort of really bad storage (decades in a hot cold hot cold garage or storage
unit (which are live ovens)

I think I'm going to toss these.

Author:

Adjour

Posted:

Nov 5, 2019 12:42

Subject:

Re: Sticky/ oily vintage wheels...trash?

Viewed:

34 times

Topic:

In Help, mfav writes:

In Help, Adjour writes:

Are they trash? Can I clean them?

https://ec.europa.eu/environment/aarhus/pdf/35/Annex_11_report_from_Lowell_Center.pdf

Page 15.

If they're SBS and the plasticizer is leaching from them, you probably ought
to handle them with nitrile gloves, double-plastic-bag them, and take them to
hazardous waste.

Honestly, I'm inclined to go this route, as I said in the OP, I've seen
whatever is "on" these tires MELT the neighboring bricks. My gut tells
me whatever is going on here is bad JuJu.

Author:

calebfishn

Posted:

Nov 5, 2019 12:32

Subject:

Re: Sticky/ oily vintage wheels...trash?

Viewed:

33 times

Topic:

In Help, runner.caller writes:

In Help, Adjour writes:

2346 Tire 30 x 10.5 Offset Tread
Parts: Wheel, Tire & Tread

Crystal

I don't think tackle box trouble has much to do with hot and cold temperature.
All of your soft plastic lures and worms seem to be a vinyl plastic that will
react strongly with styrene plastic. Fishing boxes of that material work well
for weights and hooks, and usually don't interact with the paint on your
jigs, bu they are trouble if they come into contact with . Good quality tackle
storage should not be that shiny clear styrene plastic.

Author:

runner.caller

Posted:

Nov 5, 2019 10:01

Subject:

Re: Sticky/ oily vintage wheels...trash?

Viewed:

46 times

Topic:

In Help, Adjour writes:

2346 Tire 30 x 10.5 Offset Tread
Parts: Wheel, Tire & Tread

Author:

mfav

Posted:

Nov 5, 2019 09:34

Subject:

Re: Sticky/ oily vintage wheels...trash?

Viewed:

62 times

Topic:

In Help, Adjour writes:

Are they trash? Can I clean them?

Author:

Turez

Posted:

Nov 5, 2019 05:59

Subject:

772 Brick 1 x 2 x 2 without Inside Axle Holde

Viewed:

114 times

Topic:

Status:

Open

Hello everyone,

772 Brick 1 x 2 x 2 without Inside Axle Holder or Stud Holder
Parts: Brick
Marked for Deletion

I came across this brick while checking the inventory of 7623
and I am wondering, does this part variant actually exist? I do not have it in
my collection and I also haven't found a photo showing the bottom (BL doesn't
have one too). Moreover, the quantities for sale are very low. I have asked four
sellers to check this variant. Two of them replied instantly and said their parts
are 3245b/c. One seller didn't answer but moved his parts to 3245b/c and
one seller didn't react at all. Based on that it is very likely that the
other parts for sale are also sorted incorrectly. But I don't know how to
go on with this thing now. How can one be sure that this variant actually does
not exist?

(Yes, there is a printed brick

772p01 Brick 1 x 2 x 2 without Bottom Tube with Window Pattern
Parts: Brick, Decorated

but I am talking about the plain variant.)

Regards
Jonas

Author:

popsicle

Posted:

Nov 5, 2019 01:24

Subject:

Re: Sticky/ oily vintage wheels...trash?

Viewed:

79 times

Topic:

In Help, popsicle writes:

In Help, Adjour writes:

I believe Lego uses Styrene-Butadiene Styrene (SBS rubber) for their tires. Pretty
much the same material used on your sneakers like vans or converse. The edging
around the bottom of the shoe, if you’ve ever had to clean them. Also used on
many of today’s automotive parts such as rubber molding, trim, etc.

Knowing this, you should be able to determine what products you could use to
clean and/or treat the tires, to stay stoked

Remembering the proclamations you made of placing me on your ignore list, if
you've actually done so, I guess this advise is for naught and I'm spinning
my wheels here

Maybe another can pass it on.

Author:

popsicle

Posted:

Nov 5, 2019 00:54

Subject:

Re: Sticky/ oily vintage wheels...trash?

Viewed:

83 times

Topic:

In Help, Adjour writes:

I just got some

2346 Tire 30 x 10.5 Offset Tread
Parts: Wheel, Tire & Tread

Author:

Adjour

Posted:

Nov 4, 2019 23:20

Subject:

Sticky/ oily vintage wheels...trash?

Viewed:

165 times

Topic:

Status:

Open

2346 Tire 30 x 10.5 Offset Tread
Parts: Wheel, Tire & Tread

Author:

emperorpenguini

Posted:

Oct 31, 2019 15:50

Subject:

Re: Bases, flats, platforms

Viewed:

64 times

Topic:

In Catalog, iprice writes:

In Catalog, emperorpenguini writes:

I don't have the correct word to get the catalog to search for large flat
pieces, 32x32 stud for example.
What does the cataolg refer to h=these as?

Thanks, Newby

Plates and

Thank you

Author:

iprice

Posted:

Oct 31, 2019 15:48

Subject:

Re: Bases, flats, platforms

Viewed:

52 times

Topic:

In Catalog, emperorpenguini writes:

I don't have the correct word to get the catalog to search for large flat
pieces, 32x32 stud for example.
What does the cataolg refer to h=these as?

Thanks, Newby

Plates and baseplates

Author:

emperorpenguini

Posted:

Oct 31, 2019 15:45

Subject:

Bases, flats, platforms

Viewed:

110 times

Topic:

Status:

Open

I don't have the correct word to get the catalog to search for large flat
pieces, 32x32 stud for example.
What does the cataolg refer to h=these as?

Thanks, Newby

Author:

Soviet

Posted:

Oct 30, 2019 14:44

Subject:

Re: 15400 shooter

Viewed:

73 times

Topic:

In Catalog, Thisoldtoyhouse writes:

does anyone know where to find the shooter 15400....used to be 15301....i cannot
find it in bricklink???

harry

15301c01 Projectile Launcher, 1 x 4 Spring Shooter with Light Bluish Gray Top
Parts: Projectile Launcher

Author:

Thisoldtoyhouse

Posted:

Oct 30, 2019 14:39

Subject:

15400 shooter

Viewed:

111 times

Topic:

Status:

Open

does anyone know where to find the shooter 15400....used to be 15301....i cannot
find it in bricklink???

harry

Author:

Admin_Russell

Posted:

Oct 28, 2019 12:14

Subject:

Re: assembled parts with stickers

Viewed:

50 times

Topic:

In Catalog, yorbrick writes:

This will save you from "running over" a Left / Right pair, e.g.

[p=BA84pb01L]
[p=BA84pb01R]

By the way, the stickered assemblies have to be renumbered in the near future
to get an extra 0.

Yes, that is correct. Good thing we didn't change them before when we added
BrickArms.

What does the BA here mean? Is it "brick assembly" or something similar?

Yes, "Brick Assembly"

Author:

Admin_Russell

Posted:

Oct 27, 2019 19:58

Subject:

Re: assembled parts with stickers

Viewed:

65 times

Topic:

In Catalog, Turez writes:

In Catalog, Lexesmom writes:

Ok I found the "sticker over assembly" group but my question is what is the process
to submit it, when I go to add or change then it asks for the part number and
it doesn't have one because its two parts together with a sticker so how
do I submit it for an add to the set?

Most of the time that will work, but the foolproof way to search is to check
for "BA92*".

This will save you from "running over" a Left / Right pair, e.g.

[p=BA84pb01L]
[p=BA84pb01R]

By the way, the stickered assemblies have to be renumbered in the near future
to get an extra 0.

Yes, that is correct. Good thing we didn't change them before when we added
BrickArms.

Author:

Turez

Posted:

Oct 27, 2019 17:17

Subject:

Re: assembled parts with stickers

Viewed:

52 times

Topic:

In Catalog, Lexesmom writes:

Wow just saw this, thanks for the info I would have never gotten all that on
my own. I assumed that admin would have to give it its own part number I didn't
realize I could do that for them. Maybe I should re submit it? I just submitted
the photo today.

I see you resubmitted the part with the correct number and name today.

[p=BA93pb01]

Now just submit your photo to that entry and it will be approved.

And you can delete your previous submission "61678-black" and your photo submitted
to part 61678 at
https://www.bricklink.com/myActivity.asp
or at the bottom of
https://www.bricklink.com/catalogAdd.asp

Author:

Lexesmom

Posted:

Oct 27, 2019 15:41

Subject:

Re: assembled parts with stickers

Viewed:

41 times

Topic:

In Catalog, Turez writes:

In Catalog, Lexesmom writes:

This is how I added a stickered assembly a few weeks ago:

First check if there already is an assembly like yours in the catalog by searching
for "assembly slopes".

Results: https://www.bricklink.com/catalogList.asp?q=assembly%20slopes

As you can see, there is no assembly consisting of two curved slopes 4x1. So
your assembly is a new one. Now check the first free number for assembled parts
with stickers. Open the "Sticker Over Assembly" category and sort by item number:
https://www.bricklink.com/catalogList.asp?pg=1&catString=582&itemBrand=1000&catType=P&v=1

The highest number is BA91pb01, so your part number would be BA92pb01.

To be sure this number is not used for a recent entry, check items pending approval:
https://www.bricklink.com/catalogList.asp?itemPend=Y

No results for "BA92pb01", so you can use this number.

For part name, I would suggest "Stickered Assembly 2 x 4 x 1 with Circled Number
9 Pattern (Sticker) - Set 8159 - 2 Slopes Curved 4 x 1 No Studs"
(I have used the name of similar part BA43pb02 as a template).

If exactly the same assembly (two curved slopes 4x1 in our example) is added
with another sticker later, that assembly will get number BA92pb02 etc. That
means "BAxx" stands for the speficic assembly and "pbxx" stands (as always) for
the sticker or imprint.

By the way, the stickered assemblies have to be renumbered in the near future
to get an extra 0.

Regards,
Jonas

Author:

Admin_Russell

Posted:

Oct 25, 2019 20:49

Subject:

Re: Set 11915 Nya Water Spider needs added

Viewed:

56 times

Topic:

In Catalog, POPS_BLOCK_SHOP writes:

When I look up 11915 in bricklink it does not come up. Anyone know why???

It doesn't appear to be added to the catalog yet. You can do this yourself
- just use this form:

https://www.bricklink.com/wantedCatalog.asp?catType=S

and model the new entry off of this one:

11909-1 (Inv) Parts for NINJAGO - Build Your Own Adventure (Books b15njo07 / b15njo07nl)
70 Parts, 1 Minifigure, 2015
Sets: NINJAGO: Rebooted

Author:

POPS_BLOCK_SHOP

Posted:

Oct 25, 2019 20:40

Subject:

Set 11915 Nya Water Spider needs added

Viewed:

71 times

Topic:

Status:

Open

When I look up 11915 in bricklink it does not come up. Anyone know why???

Author:

normann1974

Posted:

Oct 25, 2019 18:07

Subject:

Warped 2x4 plates?

Viewed:

115 times

Topic:

Status:

Open

These warped 2x4 plates have been showing up in some lots I've bought (I've
thrown out about 25 of these during the last couple of months).

They only ever warp in the pip end, and I've seen it only for black, and
never for any other types of plates.

Does anyone know of an explanation?

/Jan

Author:

Stellar

Posted:

Oct 25, 2019 11:25

Subject:

Re: Trying to add torso gets me 500 error

Viewed:

26 times

Topic:

Thanks for the reply but it was while creating the parts, you upload the picture
after you have already created the parts.

I just tried now and I got to create them correctly and it let me add the image
too.

973pb3703c01 (Inv) Torso LEGO World 2019 with Splash of Colors, Stars and Number 19 Pattern / White Arms / Yellow Hands
Parts: Minifigure, Torso Assembly, Decor.

973pb3703 Torso LEGO World 2019 with Splash of Colors, Stars and Number 19 Pattern
Parts: Minifigure, Torso

Thanks,
Sergio
Stellar Bricks

In Catalog, bje writes:

Reduce the size of your graphic - if it is too big you make BrickLink have 500
seizures

In Catalog, Stellar writes:

Hello,

I want to create an entry to this new torso and torso assembly.

I tried to add these 2 items:

973pb3703
Torso LEGO World The Netherlands 2019 with Number 19 Pattern
0.82g

973pb3703c01
Torso LEGO World The Netherlands 2019 with Number 19 Pattern / White Arms / Yellow
Hands
1.25g

But I keep getting error 500...

Could someone else try?

Thanks,
Sergio

Author:

bje

Posted:

Oct 25, 2019 09:33

Subject:

Re: Trying to add torso gets me 500 error

Viewed:

22 times

Topic:

Reduce the size of your graphic - if it is too big you make BrickLink have 500
seizures

In Catalog, Stellar writes:

Author:

Stellar

Posted:

Oct 25, 2019 09:24

Subject:

Trying to add torso gets me 500 error

Viewed:

48 times

Topic:

Status:

Open

Author:

Admin_Russell

Posted:

Oct 23, 2019 20:41

Subject:

Re: Upgrade for Forum / Message macro tags

Viewed:

87 times

Topic:

In Catalog, maxx3001 writes:

In Catalog, Admin_Russell writes:

We have tweaked the Forum / Message macro tags in the following ways:

Nice, but now the links to the parts don’t work.......

So, maybe not that usefull?

This bug has already been fixed but it isn't live yet. We are also adding
the color name to the macro tag.

Author:

Crafteewon

Posted:

Oct 21, 2019 00:38

Subject:

Re: sw0620 Tusken Raider

Viewed:

57 times

Topic:

In Catalog, AZbrickGUY writes:

Hey all,
Has anyone else ran into this? I have a sw0620 Tusken Raider mini but without
the markings on his shirt. He is super mint looking and doesn't look like
they have been removed. I will try to take a pic of him to show. So, has anyone
else ran into this one?? Thanks for any info.

I found that 2 of the 6 I have do not shown the markings on the front although
they both have them on the back.
They are not clones as they have lego stamps and I parted them out new from sets
myself. I parted them from two different sets. The battlepack and the speeder
so unsure which one they came from.

Author:

axaday

Posted:

Oct 19, 2019 19:05

Subject:

Re: Same sticker sheet listed multiple times

Viewed:

50 times

Topic:

Would your software still work if there were one entry with 5 alternate part
numbers?

n Catalog, Teup writes:

In Catalog, randyipp writes:

In Catalog Requests, Teup writes:

In Catalog Requests, randyipp writes:

Any reason there are 6 entries for the same sticker sheet? Can the name not
contain all the different sets it comes from?

[p=8777stk01]
[p=8778stk01]
[p=8779stk01]
[p=8780stk01]
[p=8799stk01]
[p=8800stk01]

I prefer it this way. It's a rare occurrence and changing it would save only
a few entries while making the entire sticker sheet database inconsistent.
I see how it can be a problem when you're looking to buy one, but I wonder
how often this really happens?

So are you saying it is preferable for the database but not for buying and selling.
This seems like the better solution?

Would you have 6 entries on your own webshop?

Well, buyers seem OK with puzzling around with minifigs buying them either whole
or in parts. That's also a situation where people are searching for two things
in parallel that come down to the same thing and it's much more common.
It would mess up my syncing software, for one thing. And I think generally item
names being adaptable depending on what is released next is not a good situation.
So yeah, if I can choose, I'd have multiple entries, but that's just
my opinion.

Author:

Cob

Posted:

Oct 19, 2019 17:38

Subject:

Re: sw0620 Tusken Raider

Viewed:

45 times

Topic:

In Catalog, AZbrickGUY writes:

If had to had guess, I say clone. Does it have LEGO printed on the neck?

Author:

Teup

Posted:

Oct 19, 2019 17:37

Subject:

Re: Same sticker sheet listed multiple times

Viewed:

40 times

Topic:

In Catalog, randyipp writes:

In Catalog Requests, Teup writes:

In Catalog Requests, randyipp writes:

So are you saying it is preferable for the database but not for buying and selling.
This seems like the better solution?

Would you have 6 entries on your own webshop?

Author:

AZbrickGUY

Posted:

Oct 19, 2019 12:14

Subject:

sw0620 Tusken Raider

Viewed:

104 times

Topic:

Status:

Open

Author:

randyipp

Posted:

Oct 18, 2019 22:33

Subject:

Re: Same sticker sheet listed multiple times

Viewed:

43 times

Topic:

In Catalog Requests, Teup writes:

In Catalog Requests, randyipp writes:

So are you saying it is preferable for the database but not for buying and selling.
This seems like the better solution?

Would you have 6 entries on your own webshop?

Author:

Teup

Posted:

Oct 18, 2019 18:31

Subject:

Re: Same sticker sheet listed multiple times

Viewed:

46 times

Topic:

In Catalog Requests, randyipp writes:

Author:

randyipp

Posted:

Oct 18, 2019 18:19

Subject:

Same sticker sheet listed multiple times

Viewed:

93 times

Topic:

Status:

Open

Author:

Turez

Posted:

Oct 18, 2019 13:02

Subject:

Re: assembled parts with stickers

Viewed:

59 times

Topic:

In Catalog, Lexesmom writes:

Regards,
Jonas

Author:

maxx3001

Posted:

Oct 17, 2019 12:41

Subject:

Re: Upgrade for Forum / Message macro tags

Viewed:

46 times

Topic:

In Catalog, Admin_Russell writes:

We have tweaked the Forum / Message macro tags in the following ways:

Nice, but now the links to the parts don’t work.......

So, maybe not that usefull?

Maxx

1) For parts, the color of the image may now be specified by adding a comma and
the BrickLink part number after the Item Number:

4085d Plate, Modified 1 x 1 with Open O Clip Thick (Vertical Grip)
Parts: Plate, Modified {Blue}

4085d Plate, Modified 1 x 1 with Open O Clip Thick (Vertical Grip)
Parts: Plate, Modified {Medium Blue}

4085d Plate, Modified 1 x 1 with Open O Clip Thick (Vertical Grip)
Parts: Plate, Modified {Dark Bluish Gray}

4085d Plate, Modified 1 x 1 with Open O Clip Thick (Vertical Grip)
Parts: Plate, Modified {Light Bluish Gray}

2) For sets, instructions and original boxes, the suffix is only needed when
it is not "-1":

493-1 (Inv) Space Command Center (Flatplate version)
161 Parts, 4 Minifigures, 1979
Sets: Space: Classic Space

493-3 (Inv) Space Command Center (Craterplate version)
145 Parts, 4 Minifigures, 1979
Sets: Space: Classic Space

Author:

crazylegoman

Posted:

Oct 17, 2019 10:51

Subject:

Re: Upgrade for Forum / Message macro tags

Viewed:

41 times

Topic:

I really like both of these upgrades. Thanks!

David

Author:

SylvainLS

Posted:

Oct 17, 2019 06:57

Subject:

Re: Upgrade for Forum / Message macro tags

Viewed:

45 times

Topic:

In Catalog, Admin_Russell writes:

We have tweaked the Forum / Message macro tags in the following ways:

1) For parts, the color of the image may now be specified by adding a comma and
the BrickLink part number after the Item Number:

4085d Plate, Modified 1 x 1 with Open O Clip Thick (Vertical Grip)
Parts: Plate, Modified {Blue}

4085d Plate, Modified 1 x 1 with Open O Clip Thick (Vertical Grip)
Parts: Plate, Modified {Medium Blue}

4085d Plate, Modified 1 x 1 with Open O Clip Thick (Vertical Grip)
Parts: Plate, Modified {Dark Bluish Gray}

4085d Plate, Modified 1 x 1 with Open O Clip Thick (Vertical Grip)
Parts: Plate, Modified {Light Bluish Gray}

Yeah!

2) For sets, instructions and original boxes, the suffix is only needed when
it is not "-1":

493-1 (Inv) Space Command Center (Flatplate version)
161 Parts, 4 Minifigures, 1979
Sets: Space: Classic Space

493-3 (Inv) Space Command Center (Craterplate version)
145 Parts, 4 Minifigures, 1979
Sets: Space: Classic Space

Yeah 2!

Author:

Hygrotus

Posted:

Oct 17, 2019 06:53

Subject:

Re: Upgrade for Forum / Message macro tags

Viewed:

44 times

Topic:

In Catalog, JusTiCe8 writes:

I have a hard time understanding the sentence, in fact, we should read "a comma
and the BL color number" and not "BL part number".

Still, a direct link to color codes would be welcome, I doubt anyone knows them
all perfectly.

In Catalog, Admin_Russell writes:

We have tweaked the Forum / Message macro tags in the following ways:

1) For parts, the color of the image may now be specified by adding a comma and
the BrickLink part number after the Item Number:

[ p=4085d,7 ]

[...]

Here you have direct link to colors it is easy to find,
and there you have id for them
https://www.bricklink.com/catalogColors.asp?utm_content=subnav

Author:

JusTiCe8

Posted:

Oct 17, 2019 06:39

Subject:

Re: Upgrade for Forum / Message macro tags

Viewed:

42 times

Topic:

[...]

Author:

axaday

Posted:

Oct 17, 2019 05:44

Subject:

Re: Upgrade for Forum / Message macro tags

Viewed:

40 times

Topic:

In Catalog, Admin_Russell writes:

We have tweaked the Forum / Message macro tags in the following ways:

1) For parts, the color of the image may now be specified by adding a comma and
the BrickLink part number after the Item Number:

4085d Plate, Modified 1 x 1 with Open O Clip Thick (Vertical Grip)
Parts: Plate, Modified {Blue}

4085d Plate, Modified 1 x 1 with Open O Clip Thick (Vertical Grip)
Parts: Plate, Modified {Medium Blue}

4085d Plate, Modified 1 x 1 with Open O Clip Thick (Vertical Grip)
Parts: Plate, Modified {Dark Bluish Gray}

4085d Plate, Modified 1 x 1 with Open O Clip Thick (Vertical Grip)
Parts: Plate, Modified {Light Bluish Gray}

2) For sets, instructions and original boxes, the suffix is only needed when
it is not "-1":

493-1 (Inv) Space Command Center (Flatplate version)
161 Parts, 4 Minifigures, 1979
Sets: Space: Classic Space

493-3 (Inv) Space Command Center (Craterplate version)
145 Parts, 4 Minifigures, 1979
Sets: Space: Classic Space

I like that.

Author:

Soviet

Posted:

Oct 17, 2019 05:06

Subject:

Re: Upgrade for Forum / Message macro tags

Viewed:

40 times

Topic:

In Catalog, Admin_Russell writes:

We have tweaked the Forum / Message macro tags in the following ways:

1) For parts, the color of the image may now be specified by adding a comma and
the BrickLink COLOR number after the Item Number:

Correction, and here is a link to the updated Help Page:

https://www.bricklink.com/help.asp?helpID=1147

Nice!

3010p01 Brick 1 x 4 with Smile Pattern
Parts: Brick, Decorated {Red}

Author:

Admin_Russell

Posted:

Oct 17, 2019 04:59

Subject:

Re: Upgrade for Forum / Message macro tags

Viewed:

71 times

Topic:

In Catalog, Admin_Russell writes:

Correction, and here is a link to the updated Help Page:

https://www.bricklink.com/help.asp?helpID=1147

Author:

Admin_Russell

Posted:

Oct 17, 2019 04:55

Subject:

Upgrade for Forum / Message macro tags

Viewed:

200 times

Topic:

Status:

Open

We have tweaked the Forum / Message macro tags in the following ways:

1) For parts, the color of the image may now be specified by adding a comma and
the BrickLink part number after the Item Number:

4085d Plate, Modified 1 x 1 with Open O Clip Thick (Vertical Grip)
Parts: Plate, Modified {Blue}

4085d Plate, Modified 1 x 1 with Open O Clip Thick (Vertical Grip)
Parts: Plate, Modified {Medium Blue}

4085d Plate, Modified 1 x 1 with Open O Clip Thick (Vertical Grip)
Parts: Plate, Modified {Dark Bluish Gray}

4085d Plate, Modified 1 x 1 with Open O Clip Thick (Vertical Grip)
Parts: Plate, Modified {Light Bluish Gray}

2) For sets, instructions and original boxes, the suffix is only needed when
it is not "-1":

493-1 (Inv) Space Command Center (Flatplate version)
161 Parts, 4 Minifigures, 1979
Sets: Space: Classic Space

493-3 (Inv) Space Command Center (Craterplate version)
145 Parts, 4 Minifigures, 1979
Sets: Space: Classic Space

Author:

Lexesmom

Posted:

Oct 16, 2019 15:23

Subject:

Re: assembled parts with stickers

Viewed:

48 times

Topic:

In Catalog, Lexesmom writes:

In Tiny Turbo set number 8159 there is a part that is not listed in the counter
parts that has two of part number 61678 together with a black sticker with the
circled number 6 on it. How do I add this to this set so I can add it to my
inventory? Thanks for any help.

Author:

Hygrotus

Posted:

Oct 16, 2019 09:24

Subject:

Re: assembled parts with stickers

Viewed:

51 times

Topic:

In Catalog, mikmo writes:

I thought they stopped accepting stickered assemblys a long time ago ?

Am i wrong here ?

Mikael / MikMo

First hear

https://www.bricklink.com/catalogListOld.asp?pg=1&q=stickered+over+assembly&catLike=W&sortBy=D&sortAsc=D&itemBrand=1000&v=1

It was a problem only when parts assembly was hold only by sticker, then they
weren't accepted now they are.

Author:

mikmo

Posted:

Oct 16, 2019 09:00

Subject:

Re: assembled parts with stickers

Viewed:

34 times

Topic:

I thought they stopped accepting stickered assemblys a long time ago ?

Am i wrong here ?

Mikael / MikMo

Author:

yorbrick

Posted:

Oct 16, 2019 04:41

Subject:

Re: Torso number

Viewed:

38 times

Topic:

In Catalog, grutto writes:

Can anyone help me with this torso.
What is huis BL numbr?

I don't know. But it looks in such a bad condition, I wouldn't bother
with it.

Author:

grutto

Posted:

Oct 15, 2019 21:32

Subject:

Torso number

Viewed:

89 times

Topic:

Status:

Open

Can anyone help me with this torso.
What is huis BL numbr?

Author:

fritsp

Posted:

Oct 15, 2019 15:59

Subject:

Re: assembled parts with stickers

Viewed:

40 times

Topic:

You know how to add normal parts?
Just the same, but in this category "sticker over assembly"
https://www.bricklink.com/catalogList.asp?catType=P&catID=582

Author:

Lexesmom

Posted:

Oct 15, 2019 14:12

Subject:

assembled parts with stickers

Viewed:

85 times

Topic:

Status:

Open

Author:

crazylegoman

Posted:

Oct 14, 2019 01:00

Subject:

Re: 1X1X3 brick & door compatibility question

Viewed:

49 times

Topic:

In Catalog, RecycledBrick writes:

It fits. The door swings freely

Thank you!

Author:

crazylegoman

Posted:

Oct 13, 2019 21:10

Subject:

1X1X3 brick & door compatibility question

Viewed:

83 times

Topic:

Status:

Open

I thought that this door

64390 Door 1 x 4 x 6 Round Top with Window and Keyhole, Reinforced Edge
Parts: Door

fit onto this modified brick

60583b Brick, Modified 1 x 1 x 3 with 2 Clips (Vertical Grip) - Hollow Stud
Parts: Brick, Modified

(either version of the 1X1X3 brick.)

The catalog pages for both the brick and the door list other parts that they
are compatible with. I thought that these 2 parts worked together, but from
what I see here, they do not. Perhaps the relationship just hasn't been
added yet? Can anyone tell me for sure if that door will fit into the clips
of that brick?

Thanks,
David

Author:

1977_mauro

Posted:

Oct 12, 2019 13:29

Subject:

Re: Change gear 853651 to 853654

Viewed:

28 times

Topic:

Dzieki serdeczne

Thank you again!

In Catalog Requests, Hygrotus writes:

In Catalog Requests, 1977_mauro writes:

Here is another and the last one:

853565

https://www.lego.com/de-de/product/lego-elves-emily-jones-diary-sketch-book-853565

Not in the catalogue as well...

and there it is

853565 Elves Emily Jones' Diary Sketch Book
Books: Activity Book: Elves

Author:

Hygrotus

Posted:

Oct 12, 2019 13:25

Subject:

Re: Change gear 853651 to 853654

Viewed:

21 times

Topic:

In Catalog Requests, 1977_mauro writes:

Here is another and the last one:

853565

https://www.lego.com/de-de/product/lego-elves-emily-jones-diary-sketch-book-853565

Not in the catalogue as well...

and there it is

853565 Elves Emily Jones' Diary Sketch Book
Books: Activity Book: Elves

Author:

1977_mauro

Posted:

Oct 12, 2019 13:13

Subject:

Re: Change gear 853651 to 853654

Viewed:

25 times

Topic:

Here is another and the last one:

853565

https://www.lego.com/de-de/product/lego-elves-emily-jones-diary-sketch-book-853565

Not in the catalogue as well...

In Catalog Requests, Hygrotus writes:

In Catalog Requests, 1977_mauro writes:

Thank you!

You're welcome

Thank you for this find.

Author:

Hygrotus

Posted:

Oct 12, 2019 13:07

Subject:

Re: Change gear 853651 to 853654

Viewed:

24 times

Topic:

In Catalog Requests, 1977_mauro writes:

Thank you!

You're welcome

Thank you for this find.

Author:

1977_mauro

Posted:

Oct 12, 2019 13:06

Subject:

Re: Change gear 853651 to 853654

Viewed:

28 times

Topic:

Thank you!

In Catalog Requests, Hygrotus writes:

Number which you gave link to 853654 has diffrent torso and it is not in our
catalog

Added to the catalog

853654 Elves Aira the Wind Elf Key Chain #2
Gear: Key Chain: Elves

old one stays with it number without any change

853561 Elves Aira the Wind Elf Key Chain #1
Gear: Key Chain: Elves

Author:

Hygrotus

Posted:

Oct 12, 2019 13:00

Subject:

Re: Change gear 853651 to 853654

Viewed:

27 times

Topic:

In Catalog Requests, Hygrotus writes:

Number which you gave link to 853654 has diffrent torso and it is not in our
catalog

Added to the catalog

853654 Elves Aira the Wind Elf Key Chain #2
Gear: Key Chain: Elves

old one stays with it number without any change

853561 Elves Aira the Wind Elf Key Chain #1
Gear: Key Chain: Elves

Author:

Hygrotus

Posted:

Oct 12, 2019 12:52

Subject:

Re: Change gear 853651 to 853654

Viewed:

27 times

Topic:

In Catalog Requests, Hygrotus writes:

In Catalog Requests, 1977_mauro writes:

Hi,

the Elves Aira the Wind Elf Key Chain had the number 853654:

https://www.lego.com/de-lu/product/lego-elves-aira-the-wind-elf-keyring-853654

853651 is occupied by a Batman set:

https://www.lego.com/en-gb/product/the-lego-batman-movie-accessory-set-853651

Thanks,
Mauro

Number for Aira key chain is correct

853561 Elves Aira the Wind Elf Key Chain #1
Gear: Key Chain: Elves

and it differs from Batman set

853651-1 (Inv) Gotham City Police Department Pack blister pack
19 Parts, 3 Minifigures, 2017
Sets: Super Heroes: The LEGO Batman Movie

853561

853651

here you have this key chain in LEGo shop with the same number which we have
in the catalog
https://www.lego.com/pl-pl/product/lego-elves-aira-the-wind-elf-key-chain-853561
853561

Number which you gave link to 853654 has diffrent torso and it is not in our
catalog

Author:

Hygrotus

Posted:

Oct 12, 2019 12:48

Subject:

Re: Change gear 853651 to 853654

Viewed:

33 times

Topic:

In Catalog Requests, 1977_mauro writes:

Number for Aira key chain is correct

853561 Elves Aira the Wind Elf Key Chain #1
Gear: Key Chain: Elves

and it differs from Batman set

853651-1 (Inv) Gotham City Police Department Pack blister pack
19 Parts, 3 Minifigures, 2017
Sets: Super Heroes: The LEGO Batman Movie

853561

853651

Author:

1977_mauro

Posted:

Oct 12, 2019 12:27

Subject:

Change gear 853651 to 853654

Viewed:

60 times

Topic:

Status:

Open

Author:

axaday

Posted:

Oct 11, 2019 20:10

Subject:

Re: Undetermined 3183

Viewed:

53 times

Topic:

http://v4ei.com/brickref/3183a-vs-3183c.php

In LEGO, mfav writes:

That'll get it. Thanks!

Author:

mfav

Posted:

Oct 11, 2019 20:02

Subject:

Re: Undetermined 3183

Viewed:

49 times

Topic:

http://v4ei.com/brickref/3183a-vs-3183c.php

Author:

SylvainLS

Posted:

Oct 11, 2019 18:01

Subject:

Re: Undetermined 3183

Viewed:

51 times

Topic:

In LEGO, axaday writes:

3183 Plate, Modified 1 x 4 with Tow Ball Socket (Undetermined Type)
Parts: Plate, Modified

I have this in a set and I want to determine it, but I'm a little lost.
It has the 4 slots, but I can't tell from the limited pics the long and short
socket. Can someone help?

The four I have are the same length but as one has two slots and the others 4,
I guess they are all “long.”
The length is a bit more than a stud: you can’t put a brick in front of the socket
and aligned on studs. (You can put a plate because the slots are high enough
for the tiny “bit more.”)

Oh, if you have

3730 Plate, Modified 2 x 2 with Tow Ball Socket, Short, 4 Slots
Parts: Plate, Modified

those are shorter, by around 1mm.

Author:

axaday

Posted:

Oct 11, 2019 17:35

Subject:

Undetermined 3183

Viewed:

138 times

Topic:

Status:

Open

3183 Plate, Modified 1 x 4 with Tow Ball Socket (Undetermined Type)
Parts: Plate, Modified

I have this in a set and I want to determine it, but I'm a little lost.
It has the 4 slots, but I can't tell from the limited pics the long and short
socket. Can someone help?

Author:

popsicle

Posted:

Oct 11, 2019 12:50

Subject:

Re: Comics

Viewed:

71 times

Topic:

In General, mfav writes:

I keep getting asked for these, so...

http://v4ei.com/mini-fig-ure-outer/comics/index.php

Sorry for the late response, Mark.

I do truly enjoy your comic creations, they're superb satire. You sir, have
a gift, no doubt!

For the life of me, though, I don't understand this comic strip?

I see clearly Russell with his hair-on-fire, but don't get the storyline
or understand whom the others are? To be completely honest, I feel kinda stupid,
if it's a given for others!

-Cory

Author:

tons_of_bricks

Posted:

Oct 11, 2019 06:23

Subject:

Re: 49699 a Panel?!

Viewed:

50 times

Topic:

In Catalog, DeLuca writes:

In Catalog, Teup writes:

So it's a door/window/panel/technic/vehicle/slope/arch/brick modified/cylinder..
I think this part just broke the catalog

What about a new category: “Technic, Brick, Modified”?
This would include Parts (49699) and (30528), along with (2991), (2991b), (2989),
(85943), (18975), (92715), and (61185c01).

49699 Panel 1 x 6 x 4 1/3 with Window and 4 Pin Holes
Parts: Panel

30528 Arch 1 x 8 x 6 (Portal)
Parts: Arch

2991 Technic, Brick 1 x 2 - 1 x 2 Angled with Bumper Holder
Parts: Technic, Brick

2991b Technic, Brick 1 x 2 - 1 x 2 Angled with Bumper Holder, Open Front
Parts: Technic, Brick

2989 Technic, Brick 1 x 4 with Bumper Holder
Parts: Technic, Brick

85943 Technic, Brick 1 x 2 with Hole and Dual Liftarm Extensions
Parts: Technic, Brick

18975 Technic, Brick 2 x 4 x 1 1/3 with Pin Holes and 2 x 2 Cutout
Parts: Technic, Brick

92715 Technic, Brick 4 x 16 (Conveyor Belt Frame)
Parts: Technic, Brick

61185c01 Projectile Launcher, 2 x 4 with 5 Studs, Axle Hole and Pin Lever
Parts: Projectile Launcher

We actually have that in our organization method. All the technic bricks that
say "brick modified" along with the ones you've shown here. That would make
sense to break into a new category on BL.

Author:

Teup

Posted:

Oct 11, 2019 05:07

Subject:

Re: 49699 a Panel?!

Viewed:

41 times

Topic:

In Catalog, DeLuca writes:

In Catalog, Teup writes:

Also, it doesn't make much sense to call this part a cylinder:

49949 Cylinder 6 x 10 x 4 1/3 with Open Sides and Pin Holes
Parts: Cylinder

When its own counterpart that fits into it is a Slope:

45411 Slope, Curved 6 x 8 x 2 Double
Parts: Slope, Curved

This actually makes a bit more sense, since Part (45411)'s original
counterpart is Part (45410), which is also classified as a Curved Slope. Both
Parts (45411) and (45410) could also be reclassified as Cylinders, though. 😐

45411 Slope, Curved 6 x 8 x 2 Double
Parts: Slope, Curved

45410 Slope, Curved 6 x 8 x 2 Inverted Double
Parts: Slope, Curved

Ok, yes, I can see why those should stick together.

Random idea: Changing Vehicle Base into Vehicle Base & Roof. Move all these parts
there, together with those car roofs that are currently in wedge but aren't
really that wedgy

Author:

TorontoLego

Posted:

Oct 11, 2019 02:09

Subject:

Re: Adding a Power Adapter

Viewed:

25 times

Topic:

Yes, North American pins.

Should I just list it as 9833 or would the Catalog be improved by adding it as
a different item. I don't have the packaging, just the plug.

In Catalog, BricksThatStick writes:

In Catalog, TorontoLego writes:

Which category? Any other specifics for a listing like this?

Anyone know what set it comes from?

I don't know specifically about these but it looks the same as the attached
pic from set 9833

The US/Canada listing on BL shows a different design (although it is the same
spec)

9833-2 (Inv) AC Adapter, 120V - 10V Transformer
1 Part, 2000
Sets: MINDSTORMS: NXT

But yours does look like the UK version of 9833 but I assume yours has the US/Canada
pins

9833-3 (Inv) AC Adapter, 230V - 10V Transformer Type G Plug (British)
1 Part, 2006
Sets: MINDSTORMS: NXT

Could just be an updated design?

Author:

DeLuca

Posted:

Oct 11, 2019 01:24

Subject:

Re: 49699 a Panel?!

Viewed:

36 times

Topic:

In Catalog, Teup writes:

Also, it doesn't make much sense to call this part a cylinder:

49949 Cylinder 6 x 10 x 4 1/3 with Open Sides and Pin Holes
Parts: Cylinder

When its own counterpart that fits into it is a Slope:

45411 Slope, Curved 6 x 8 x 2 Double
Parts: Slope, Curved

45410 Slope, Curved 6 x 8 x 2 Inverted Double
Parts: Slope, Curved

Author:

DeLuca

Posted:

Oct 10, 2019 16:52

Subject:

Re: 49699 a Panel?!

Viewed:

36 times

Topic:

In Catalog, DeLuca writes:

In Catalog, Teup writes:

So it's a door/window/panel/technic/vehicle/slope/arch/brick modified/cylinder..
I think this part just broke the catalog

What about a new category: “Technic, Brick, Modified”?
This would include Parts (49699) and (30528), along with (2991), (2991b), (2989),
(85943), (18975), (92715), and (61185c01).

49699 Panel 1 x 6 x 4 1/3 with Window and 4 Pin Holes
Parts: Panel

30528 Arch 1 x 8 x 6 (Portal)
Parts: Arch

2991 Technic, Brick 1 x 2 - 1 x 2 Angled with Bumper Holder
Parts: Technic, Brick

2991b Technic, Brick 1 x 2 - 1 x 2 Angled with Bumper Holder, Open Front
Parts: Technic, Brick

2989 Technic, Brick 1 x 4 with Bumper Holder
Parts: Technic, Brick

85943 Technic, Brick 1 x 2 with Hole and Dual Liftarm Extensions
Parts: Technic, Brick

18975 Technic, Brick 2 x 4 x 1 1/3 with Pin Holes and 2 x 2 Cutout
Parts: Technic, Brick

92715 Technic, Brick 4 x 16 (Conveyor Belt Frame)
Parts: Technic, Brick

61185c01 Projectile Launcher, 2 x 4 with 5 Studs, Axle Hole and Pin Lever
Parts: Projectile Launcher

Actually, Part (61185c01) should be moved to “Projectile Launcher”: https://www.bricklink.com/catalogList.asp?searchMethod=searchBoth&q=&itemBrand=1000&catType=&itemYear=&catID=992&catLike=W

61185c01 Projectile Launcher, 2 x 4 with 5 Studs, Axle Hole and Pin Lever
Parts: Projectile Launcher

Author:

DeLuca

Posted:

Oct 10, 2019 16:45

Subject:

Re: 49699 a Panel?!

Viewed:

27 times

Topic: