Discussion Forum: Messages by Brickwilbo (1534)
Redisplay Messages: Compact | Brief | All | Full      Show Messages: All | Without Replies

 Author: Brickwilbo View Messages Posted By Brickwilbo
 Posted: Nov 23, 2020 08:25
 Subject: Re: TBT - Shipping Costs - Byer chancel option
 Viewed: 42 times
 Topic: Suggestions
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Suggestions, bricksinbins writes:
  In Suggestions, Brickwilbo writes:
  In Suggestions, GunnyGunsman writes:
  Good evening,

very rarely there are differences about how much a shipping could cost, especially
when stores use the TBT quote function. Right now I had the problem, communication
was not possible at all, no response.

Why shouldn´t a byer have the option to chancel an order, right after he received
a shipping calculation he is not ready to pay? No one has to be upset, all sorted.
After the chancellation no review is needed as well IMHO. Negative review will
result in a negitve one from the other part as well.

Or even the next step: Every store has to offer at least some fixed shipment
calculations for the countries they ship to. Quotes should only be an extra option.

Just my 2 cents. I feel sad about such an outcome.


Gunny

Unexpected high shipping fee is a valid buyer reason for cancelation. https://www.bricklink.com/help.asp?helpID=79

To be specific. Unexpected high shipping fee is not one of the reasons listed.
"Shipping fee too high" is not the same thing. Too high according to what? You
might think it's too high but the Postal service does not.
Point is, the wording should be changed.

If the Seller provided a shipping fee that was too high (not clearly stated in
T&C), then it's higher compared to what's stated in the T&C of the store.
 Author: Brickwilbo View Messages Posted By Brickwilbo
 Posted: Nov 22, 2020 16:59
 Subject: Re: TBT - Shipping Costs - Byer chancel option
 Viewed: 46 times
 Topic: Suggestions
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Suggestions, GunnyGunsman writes:
  Good evening,

very rarely there are differences about how much a shipping could cost, especially
when stores use the TBT quote function. Right now I had the problem, communication
was not possible at all, no response.

Why shouldn´t a byer have the option to chancel an order, right after he received
a shipping calculation he is not ready to pay? No one has to be upset, all sorted.
After the chancellation no review is needed as well IMHO. Negative review will
result in a negitve one from the other part as well.

Or even the next step: Every store has to offer at least some fixed shipment
calculations for the countries they ship to. Quotes should only be an extra option.

Just my 2 cents. I feel sad about such an outcome.


Gunny

Unexpected high shipping fee is a valid buyer reason for cancelation. https://www.bricklink.com/help.asp?helpID=79
 Author: Brickwilbo View Messages Posted By Brickwilbo
 Posted: Nov 19, 2020 07:24
 Subject: Re: Filter Seller location: European Union
 Viewed: 35 times
 Topic: Suggestions
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Suggestions, trollfar404 writes:
  Hello,

When filtering seller location to European Union, UK is still visable.

Here in Sweden there is an extra fee for orders from countries outside EU, and
that fee applies for orders from UK. The fee is a minimum of 75 SEK and up to
125 SEK depending on the cost of the order.

Luckily I did look this up before making any order from UK, but it might be good
to fix the filtering system and remove UK from the EU list.

Have a good day!

I've moved this to Suggestions.
 Author: Brickwilbo View Messages Posted By Brickwilbo
 Posted: Nov 8, 2020 05:33
 Subject: Re: Dates
 Viewed: 36 times
 Topic: Suggestions
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Suggestions, jamesvickery writes:
  I personally think it would be a great idea to have a little green dot next to
your name if a member is currently active. As a seller , this would help with
messaging and such . and as a buyer it would mean invoicing could be done much
faster. Maybe even a last logged in date. What do you guys think?

Correction for my other post.
It was unintentionally removed with the new TOS
https://www.bricklink.com/messageThread.asp?ID=261141&nID=1169749
https://www.bricklink.com/message.asp?ID=1170025
 Author: Brickwilbo View Messages Posted By Brickwilbo
 Posted: Nov 1, 2020 03:02
 Subject: Re: We have a new Catalog Administrator!
 Viewed: 41 times
 Topic: Catalog
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Catalog, Admin_Russell writes:
  Hello everyone,

Today we have graduated our Catalog Associate BricksThatStick to the Catalog
Admin position! This will give him privileges on both sides of the catalog system
(catalog and inventories) and he is now the second member of our team to reach
this status.

Please join me in congratulating him on this achievement.

https://www.bricklink.com/memberAdmins.asp

Congratulations.
 Author: Brickwilbo View Messages Posted By Brickwilbo
 Posted: Nov 1, 2020 02:58
 Subject: Re: Order of listings
 Viewed: 40 times
 Topic: Suggestions
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Suggestions, chrism3 writes:
  When listing catalogue items by number, the list appears by color, but the colors
appear in no discernable order. It would save a lot of searching time if they
appeared in alphabetical order, the same as they do in inventories. Is this possible?

Maybe it's here: https://www.bricklink.com/catalogOptions.asp?viewFrom=P
 Author: Brickwilbo View Messages Posted By Brickwilbo
 Posted: Oct 27, 2020 02:34
 Subject: Re: Simultaneous Payment
 Viewed: 36 times
 Topic: Suggestions
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Suggestions, Beretbox writes:
  Hello, My name is Praise. I have tried to buy LEGOs through BRICKLINK,
but it is so difficult and tedious because unlike many other sites with CARTS,
such as:
-Amazon
-Ebay
-Wish
etc.....
BRICKLINK makes it to where you have to buy from each seller separately
instead of a BUY BUTTON like other online stores that allows you to enter
your payment information only once, even if you buy from all around the world.

Also, there needs to be a confirmation from the seller after shipping and handling
(S&H) have been added so you're not hit with a crazy price (such as $13.25
for a 80 cent piece) that forces you to pay a higher amount than the buyer "bargained"
for.

Unfortunately my small hobby store can't be compared to Amazon, Ebay or Wish.
I would Wish it was.😉

Try to learn the Wantlist features to buy from the fewest stores possible to
save on shipping costs.
Always read the store Terms and Splash for shipping costs.
You cou can move to the next store if it doesn't have clear shipping costs
or use the Request a Quote feature.

You'll discover how easy it can be to buy from sellers on a smaller platform
as Bricklink instead of a multi billion Amazon, Ebay or Wish.
 Author: Brickwilbo View Messages Posted By Brickwilbo
 Posted: Oct 18, 2020 13:32
 Subject: Re: Inventory being deleted by BL unfairly?
 Viewed: 67 times
 Topic: Inventories
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Inventories, chetzler writes:
  I'm just highlighting the inconsistencies, not only between different parts
of the site, but even here in the forum. Does anyone care about that? Do you
care? Depending on who you are and when you post, you can sometimes get away
with some vile stuff.
I see that the thread in the second link I posted still remains unmoderated.

Actually it was moderated: https://www.bricklink.com/message.asp?ID=1225917

  
In Inventories, Brickwilbo writes:
  In Inventories, chetzler writes:
  Sorry, maybe you missed the memo, but, by administrative edict, that rule is
no longer in effect.

See the precedent here:
https://www.bricklink.com/message.asp?ID=1224882

and note the many instances since then, especially below, where it has not enforced.
https://www.bricklink.com/message.asp?ID=1225864

The first message is from Admin regarding feedback.

For Discussions moderators, please note:
These rules are enforced by Discussions Moderators who have the final say
on what is appropriate to maintain a positive and friendly atmosphere in the
forum

Below the page: https://www.bricklink.com/help.asp?helpID=126

Have great day.
  

In Inventories, Brickwilbo writes:
  Saved and edited your post.
Rule #4
Posts should not include foul language, lewd, or other offensive content,
or links to such content. This includes replacing offensive words with alternate
letters or characters, pornography, or any kind of racial/prejudicial content.

https://www.bricklink.com/help.asp?helpID=126

In Inventories, dreambuilder71 writes:
  (snipped) BRICKLINK???!!! I just got an email with 11 figs that they just deleted
from my inventory, and some were listed as used and they were full figs with
things like "some yellowing in torso."! Someone want to tell me what is going
on please??? Did this happen just because I posted this question today?

I will not list figs as parts because FIG PARTS RARELY SELL!!!

WE NEED TO DEFINE MINIFIGS AS COMPLETE, OR INCOMPLETE LIKE SETS!

Is the community of people who helped build Bricklink, like myself, now pushed
aside and not heard in order to make OUR site better? Or is it now fully TLG
property and we have no say?




In Inventories, dreambuilder71 writes:
  So I find that each time I listed a minifig that was brand new, but missing a
part like an accessory that was in the picture of the fig, like a shoulder piece
or cape, BL in the next day or so would remove it. We can't list figs as
new but incomplete or complete because BL never was set up like that. So BL
deleted my fig post saying it was against the rules but of course no explanation.
Do we really have to list a brand new fig as used, or as parts when it's
missing something like a cape or skirt???

When it gets deleted so quickly, does that mean that another member reported
it quickly to admins to get it removed? Someone said it's the new BL algorithm
that did it automatically, but that can't be true because I see other sellers
figs that are missing parts but still listed as new. So am I being singled out
by someone following me and reporting anything I do just to be a jerk?

Thanks in advance.
James
 Author: Brickwilbo View Messages Posted By Brickwilbo
 Posted: Oct 18, 2020 08:16
 Subject: Re: Inventory being deleted by BL unfairly?
 Viewed: 54 times
 Topic: Inventories
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Inventories, chetzler writes:
  Sorry, maybe you missed the memo, but, by administrative edict, that rule is
no longer in effect.

See the precedent here:
https://www.bricklink.com/message.asp?ID=1224882

and note the many instances since then, especially below, where it has not enforced.
https://www.bricklink.com/message.asp?ID=1225864

The first message is from Admin regarding feedback.

For Discussions moderators, please note:
These rules are enforced by Discussions Moderators who have the final say
on what is appropriate to maintain a positive and friendly atmosphere in the
forum

Below the page: https://www.bricklink.com/help.asp?helpID=126

Have great day.
  

In Inventories, Brickwilbo writes:
  Saved and edited your post.
Rule #4
Posts should not include foul language, lewd, or other offensive content,
or links to such content. This includes replacing offensive words with alternate
letters or characters, pornography, or any kind of racial/prejudicial content.

https://www.bricklink.com/help.asp?helpID=126

In Inventories, dreambuilder71 writes:
  (snipped) BRICKLINK???!!! I just got an email with 11 figs that they just deleted
from my inventory, and some were listed as used and they were full figs with
things like "some yellowing in torso."! Someone want to tell me what is going
on please??? Did this happen just because I posted this question today?

I will not list figs as parts because FIG PARTS RARELY SELL!!!

WE NEED TO DEFINE MINIFIGS AS COMPLETE, OR INCOMPLETE LIKE SETS!

Is the community of people who helped build Bricklink, like myself, now pushed
aside and not heard in order to make OUR site better? Or is it now fully TLG
property and we have no say?




In Inventories, dreambuilder71 writes:
  So I find that each time I listed a minifig that was brand new, but missing a
part like an accessory that was in the picture of the fig, like a shoulder piece
or cape, BL in the next day or so would remove it. We can't list figs as
new but incomplete or complete because BL never was set up like that. So BL
deleted my fig post saying it was against the rules but of course no explanation.
Do we really have to list a brand new fig as used, or as parts when it's
missing something like a cape or skirt???

When it gets deleted so quickly, does that mean that another member reported
it quickly to admins to get it removed? Someone said it's the new BL algorithm
that did it automatically, but that can't be true because I see other sellers
figs that are missing parts but still listed as new. So am I being singled out
by someone following me and reporting anything I do just to be a jerk?

Thanks in advance.
James
 Author: Brickwilbo View Messages Posted By Brickwilbo
 Posted: Oct 18, 2020 04:57
 Subject: Re: Inventory being deleted by BL unfairly?
 Viewed: 63 times
 Topic: Inventories
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
Saved your post:

  
  In Inventories, dreambuilder71 writes:
(snipped) BRICKLINK???!!! I just got an email with 11 figs that they just deleted
from my inventory, and some were listed as used and they were full figs with
things like "some yellowing in torso."! Someone want to tell me what is going
on please??? Did this happen just because I posted this question today?

I will not list figs as parts because FIG PARTS RARELY SELL!!!

WE NEED TO DEFINE MINIFIGS AS COMPLETE, OR INCOMPLETE LIKE SETS!

Is the community of people who helped build Bricklink, like myself, now pushed
aside and not heard in order to make OUR site better? Or is it now fully TLG
property and we have no say?




  In Inventories, dreambuilder71 writes:
So I find that each time I listed a minifig that was brand new, but missing a
part like an accessory that was in the picture of the fig, like a shoulder piece
or cape, BL in the next day or so would remove it. We can't list figs as
new but incomplete or complete because BL never was set up like that. So BL
deleted my fig post saying it was against the rules but of course no explanation.
Do we really have to list a brand new fig as used, or as parts when it's
missing something like a cape or skirt???

When it gets deleted so quickly, does that mean that another member reported
it quickly to admins to get it removed? Someone said it's the new BL algorithm
that did it automatically, but that can't be true because I see other sellers
figs that are missing parts but still listed as new. So am I being singled out
by someone following me and reporting anything I do just to be a jerk?

Thanks in advance.
James


In Inventories, kzinti writes:
Some of the first, mostly the last. It's their sandbox now.
 Author: Brickwilbo View Messages Posted By Brickwilbo
 Posted: Oct 18, 2020 04:52
 Subject: Re: Inventory being deleted by BL unfairly?
 Viewed: 61 times
 Topic: Inventories
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
Saved and edited your post.
Rule #4
Posts should not include foul language, lewd, or other offensive content,
or links to such content. This includes replacing offensive words with alternate
letters or characters, pornography, or any kind of racial/prejudicial content.

https://www.bricklink.com/help.asp?helpID=126

In Inventories, dreambuilder71 writes:
  (snipped) BRICKLINK???!!! I just got an email with 11 figs that they just deleted
from my inventory, and some were listed as used and they were full figs with
things like "some yellowing in torso."! Someone want to tell me what is going
on please??? Did this happen just because I posted this question today?

I will not list figs as parts because FIG PARTS RARELY SELL!!!

WE NEED TO DEFINE MINIFIGS AS COMPLETE, OR INCOMPLETE LIKE SETS!

Is the community of people who helped build Bricklink, like myself, now pushed
aside and not heard in order to make OUR site better? Or is it now fully TLG
property and we have no say?




In Inventories, dreambuilder71 writes:
  So I find that each time I listed a minifig that was brand new, but missing a
part like an accessory that was in the picture of the fig, like a shoulder piece
or cape, BL in the next day or so would remove it. We can't list figs as
new but incomplete or complete because BL never was set up like that. So BL
deleted my fig post saying it was against the rules but of course no explanation.
Do we really have to list a brand new fig as used, or as parts when it's
missing something like a cape or skirt???

When it gets deleted so quickly, does that mean that another member reported
it quickly to admins to get it removed? Someone said it's the new BL algorithm
that did it automatically, but that can't be true because I see other sellers
figs that are missing parts but still listed as new. So am I being singled out
by someone following me and reporting anything I do just to be a jerk?

Thanks in advance.
James
 Author: Brickwilbo View Messages Posted By Brickwilbo
 Posted: Oct 1, 2020 06:00
 Subject: Re: Compulsory message before negative/neutral fb
 Viewed: 37 times
 Topic: Suggestions
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Suggestions, Shintaku writes:
  This is something that crossed my mind reading the forum.

What if you have to leave a message to the counterpart BEFORE leaving a non positive?

Like: "I am leaving this negative feedback, the counterpart may reply to this
message within XX days before the feedback becomes effective".

If I am a seller, I may want to contact a rushy buyer who is leaving me a negative
for an order that had a bad outcome before warning me about that. This way I
can offer refunds, coupons, reshipping or whatever, and the buyer may be discouraged
from leaving me bad feedback.

If I am buyer, I may want to contact a rushy seller who is leaving me a negative
without even contacting me, and I may want to settle things in order to avoid
the feedback.

I have received sometimes rushy feedbacks that underwent all the feedback removeal
procedure... this may have been just spared if the person was aware that I had
in my intentions to settle things.

The feedback page encourages to resolve issues before leaving feedback:

Please try to resolve any disputes before posting a complaint. Feedback must
not be used to communicate with your trading partner or ask them a question
 Author: Brickwilbo View Messages Posted By Brickwilbo
 Posted: Sep 23, 2020 12:17
 Subject: Re: Personal inventory price
 Viewed: 28 times
 Topic: Suggestions
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Suggestions, Wicked.Bricks writes:
  Is there something on here or could there be, a way that we can keep track
of the sets we own and what the current new value is along with the current used
value is and what the totals are?? Something like what BrickEconomy has.

Brickset.com
Rebrickable.com
 Author: Brickwilbo View Messages Posted By Brickwilbo
 Posted: Sep 22, 2020 06:24
 Subject: Re: Remember the old chat rooms?
 Viewed: 62 times
 Topic: Suggestions
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Suggestions, fab_track writes:
  I don't know if this will ever happen but I would love to see that chat rooms
return. They really helped me out when I was new and other as well. It was
also nice to make friends and talk Lego with others to get ideas and tips on
projects. I would hope that admin and the new owner of BL may see that chat
was an addition to the site. It was not the cause of BL 1.0's downfall so
it really makes no sence to take it out

Bump.

Can the voting be re-activated?
 Author: Brickwilbo View Messages Posted By Brickwilbo
 Posted: Sep 22, 2020 06:20
 Subject: Re: Bring back Chat...please!!
 Viewed: 32 times
 Topic: Suggestions
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Suggestions, SKotK writes:
  Just another vote to bring the Chat function back to this site. I really miss
being able to converse with my fellow BrickLinkians in real-time...

/quit BRING BACK CHAT (seriously)!

--SKot

Bump.

Can the voting be re-activated?
 Author: Brickwilbo View Messages Posted By Brickwilbo
 Posted: Sep 11, 2020 13:48
 Subject: Re: Enable 'Inventory' (For Non-Sellers)
 Viewed: 44 times
 Topic: Suggestions
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Suggestions, Osensnolf writes:
  I have no interest in selling bricks but I want to keep track of full and partial
sets that I have. I think the Inventory feature will work well for that.

Can this be enabled for those of us who want to use it for ourselves and not
to sell to others?

Thanks
Steve

Websites as Rebrickable.com and brickset or the Brickstock program have these
features.
You can always upgrade your account to seller and keep the store closed.
 Author: Brickwilbo View Messages Posted By Brickwilbo
 Posted: Aug 31, 2020 04:28
 Subject: Re: Seller Location Default
 Viewed: 52 times
 Topic: Suggestions
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Suggestions, wasp_sting writes:
  It would so much improve the searching/buying experience if the seller's
location (under the 'More options' drop-down) could be saved as a default
preference. It really bugs me to have to change it with each part I'm costing.
Anyone else agree?

Unless I'm overlooking a setting, in which case, please illuminate me

Select the country or region here:
https://www.bricklink.com/wantedSettings.asp?viewFrom=P
https://www.bricklink.com/priceGuideSettings.asp?viewFrom=P
 Author: Brickwilbo View Messages Posted By Brickwilbo
 Posted: Aug 24, 2020 11:44
 Subject: Re: personal inventory
 Viewed: 25 times
 Topic: Inventories
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Inventories, griecke writes:
  Can I make an inventory of my parts on bricklink and keep it and print it for
my reference?

If not do you have a link to one that works well.

Gary

Other options are Rebrickable.com or the Brickstock program.
 Author: Brickwilbo View Messages Posted By Brickwilbo
 Posted: Aug 17, 2020 04:18
 Subject: Re: Can inventory putonhere without being a seler
 Viewed: 36 times
 Topic: Suggestions
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Suggestions, KitBane writes:
  There should be a way to put your inventory into BrickLink without being a seller
so that it’s easier to part out sets for wanted lists

If I’m missing something please direct me to the page

It's possible to part out a set into a Wantlist without being a seller.

You can upgrade your account to seller without opening the store.
Or keep track of your personal inventory on Rebrickable.com.
 Author: Brickwilbo View Messages Posted By Brickwilbo
 Posted: Aug 16, 2020 16:27
 Subject: Re: Possible to search how many parts u bought
 Viewed: 21 times
 Topic: Suggestions
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Suggestions, Dragunov2 writes:
  In Suggestions, Dragunov2 writes:
  In Suggestions, Brickwilbo writes:
  In Suggestions, Dragunov2 writes:
  Hi,

I want the possibility to see how many parts I already bought from a certain
item.

Cheers,

Already exist: https://www.bricklink.com/orderSearch.asp?a=p

thx, but it doesn't work very well

https://www.bricklink.com/orderExcel.asp?orderType=placed
 Author: Brickwilbo View Messages Posted By Brickwilbo
 Posted: Aug 16, 2020 13:33
 Subject: Re: Possible to search how many parts u bought
 Viewed: 41 times
 Topic: Suggestions
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Suggestions, Dragunov2 writes:
  Hi,

I want the possibility to see how many parts I already bought from a certain
item.

Cheers,

Already exist: https://www.bricklink.com/orderSearch.asp?a=p
 Author: Brickwilbo View Messages Posted By Brickwilbo
 Posted: Jul 30, 2020 10:40
 Subject: Re: Pictures
 Viewed: 22 times
 Topic: Inventories
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Inventories, pete_brick writes:
  Hello

Is it possible to insert my own pictures of a item in my inventory?

Yes, click 'I use my own picture' .

  
Can pictures only be added through "Add" function?

Can pictures be sent with messages?

Only as link.
https://www.bricklink.com/v2/myimages_modal.page?CKEditor=splash-editor-6013&CKEditorFuncNum=1&langCode=nl

  
Thanks, peter
 Author: Brickwilbo View Messages Posted By Brickwilbo
 Posted: Jul 23, 2020 12:43
 Subject: Re: Organization of Wanted list
 Viewed: 32 times
 Topic: Suggestions
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Suggestions, paalrise writes:
  Hi,

with over 100 Wanted Lists, I would like the chance to organize my Wanted Lists.
Perhaps something like superlists or categories, for instance;

- active (buying)
- save for later

Or the possibility to name them yourself

This is already possible.

  
Just my 2 cents.

Reach out if you want to discuss this more


PS! Keep up the good work


Kind Regards, Pål R
 Author: Brickwilbo View Messages Posted By Brickwilbo
 Posted: Jul 10, 2020 05:27
 Subject: Re: Am I right and everyone else wrong?
 Viewed: 48 times
 Topic: Colors
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Colors, Superbar writes:
  Ok so you guys have more experience of this than me so I'm going to take
your word that the tile is dark red. My issue then is what does Dark red look
like to Reddish Brown and what does reddish brown look like to Brown. All the
parts I sell are used parts so its likely a lot of brown could exist so going
on that basis I was assuming everything with a reddish tint was reddish brown
and I don't have any dark red, if I'm incorrect on this then I have a
major inventory reshuffle to do.

Check this page:
https://www.bricklink.com/catalogColors.asp?v=2&itemType=P&itemNo=

  
In Colors, Brickwilbo writes:
  In Colors, pitz8008 writes:
  In Colors, iprice writes:
  In Colors, Superbar writes:
  For further clarity, another image showing the plates are definitely Brown and
the tile is reddish brown

In Colors, pitz8008 writes:
  In Colors, BasKrie writes:
  In Colors, randyf writes:
  In Colors, Superbar writes:
  Hi,

So I'd like someone to have a look at this and see if I am going mad please.
Have a look at the first picture without looking at the second you will see both
parts stuck together look identical in colour. Both are brown. Now look at the
second picture the same part Plate 1x1 with the design on that side of it is
listed only as reddish brown and never as brown. Should this not be listed as
brown?

Kind regards

Barry


The 2x2 tile looks like dark red to me and the plates reddish brown when next
to it.

Do you actually have any old brown bricks/plates to put the "others"?

TBF the plates do look brown in the first two photos. But lighting and images
can make something look very different.


Tile looks dark red to me.

+1
 Author: Brickwilbo View Messages Posted By Brickwilbo
 Posted: Jul 10, 2020 05:16
 Subject: Re: Am I right and everyone else wrong?
 Viewed: 40 times
 Topic: Colors
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Colors, pitz8008 writes:
  In Colors, iprice writes:
  In Colors, Superbar writes:
  For further clarity, another image showing the plates are definitely Brown and
the tile is reddish brown

In Colors, pitz8008 writes:
  In Colors, BasKrie writes:
  In Colors, randyf writes:
  In Colors, Superbar writes:
  Hi,

So I'd like someone to have a look at this and see if I am going mad please.
Have a look at the first picture without looking at the second you will see both
parts stuck together look identical in colour. Both are brown. Now look at the
second picture the same part Plate 1x1 with the design on that side of it is
listed only as reddish brown and never as brown. Should this not be listed as
brown?

Kind regards

Barry


The 2x2 tile looks like dark red to me and the plates reddish brown when next
to it.

Do you actually have any old brown bricks/plates to put the "others"?

TBF the plates do look brown in the first two photos. But lighting and images
can make something look very different.


Tile looks dark red to me.

+1
 Author: Brickwilbo View Messages Posted By Brickwilbo
 Posted: Jun 23, 2020 18:15
 Subject: Re: Report post button
 Viewed: 22 times
 Topic: Suggestions
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Suggestions, Rick_S. writes:
  In Suggestions, Brickwilbo writes:
  In Suggestions, Rick_S. writes:
  In Suggestions, randyf writes:
  In Suggestions, Rick_S. writes:

  curious how many of those mods are still active moderating?

All of them are.

are they? when a couple scam reported posts are still up most of the day after
being reported it just tells me there is not a good spread of mods to cover all
time zones.

Thank you for reporting.
There were two scam posts reported around 5 at night, in my timezone.
Both were canceled immediately after I woke up. 😉

figured it was you that removed them, in fact feels like you are the only moderator
working.

You can be assured that all active moderators are working together.
It's visible below the canceled post who canceled it.
 Author: Brickwilbo View Messages Posted By Brickwilbo
 Posted: Jun 23, 2020 18:05
 Subject: Re: Report post button
 Viewed: 21 times
 Topic: Suggestions
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Suggestions, Rick_S. writes:
  In Suggestions, randyf writes:
  In Suggestions, Rick_S. writes:

  curious how many of those mods are still active moderating?

All of them are.

are they? when a couple scam reported posts are still up most of the day after
being reported it just tells me there is not a good spread of mods to cover all
time zones.

Thank you for reporting.
There were two scam posts reported around 5 at night, in my timezone.
Both were canceled immediately after I woke up. 😉
 Author: Brickwilbo View Messages Posted By Brickwilbo
 Posted: Jun 23, 2020 13:36
 Subject: Re: Report post button
 Viewed: 28 times
 Topic: Suggestions
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Suggestions, Rick_S. writes:
  In Suggestions, Brickwilbo writes:
  In Suggestions, Rick_S. writes:
  In Suggestions, Rick_S. writes:
  In Suggestions, Brickwilbo writes:
  In Suggestions, Rick_S. writes:
  I feel we should get a report post button added since trying to find that page
is very not user friendly.

This was suggested before.

The Problem Center is below the page. Click forum, then enter the message number.

yeah but a bit redundant when you have to go thru 3 clicks just to get tot the
report post section.

sorry make that 4 clicks before you get to the page where you give the post number
and reason.

Yes, it's a lot of clicks and copy/paste. Not easy on a mobile phone.

while a simple report post button on the post itself would make it so much easier


It would probably also lead to accidentally clicked reports.
I prefer a more visible button with two-step verification to report a message.
 Author: Brickwilbo View Messages Posted By Brickwilbo
 Posted: Jun 23, 2020 03:24
 Subject: Re: Report post button
 Viewed: 29 times
 Topic: Suggestions
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Suggestions, Rick_S. writes:
  In Suggestions, Rick_S. writes:
  In Suggestions, Brickwilbo writes:
  In Suggestions, Rick_S. writes:
  I feel we should get a report post button added since trying to find that page
is very not user friendly.

This was suggested before.

The Problem Center is below the page. Click forum, then enter the message number.

yeah but a bit redundant when you have to go thru 3 clicks just to get tot the
report post section.

sorry make that 4 clicks before you get to the page where you give the post number
and reason.

Yes, it's a lot of clicks and copy/paste. Not easy on a mobile phone.
 Author: Brickwilbo View Messages Posted By Brickwilbo
 Posted: Jun 23, 2020 01:31
 Subject: Re: Report post button
 Viewed: 51 times
 Topic: Suggestions
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Suggestions, Rick_S. writes:
  I feel we should get a report post button added since trying to find that page
is very not user friendly.

This was suggested before.

The Problem Center is below the page. Click forum, then enter the message number.
 
 Author: Brickwilbo View Messages Posted By Brickwilbo
 Posted: Jun 21, 2020 08:18
 Subject: Re: incoming orders to inventory load
 Viewed: 38 times
 Topic: Suggestions
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Suggestions, fobya71 writes:
  It would be wonderful to have a function to load an incoming order into the personal
inventory, as it is done for partout.
Actually the loading of parts shall be done manually...


I think it would be a good function for both the re-sellers and the users that
want to simply use the inventory function.

It's possible to download orders and upload the xml file to your inventory.
 Author: Brickwilbo View Messages Posted By Brickwilbo
 Posted: Jun 16, 2020 01:37
 Subject: Re: Buyer Inventory
 Viewed: 39 times
 Topic: Suggestions
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Suggestions, ChildofAthena23 writes:
  It would be really useful if there was an inventory system implemented for buyers
not just sellers. That way if I buy a set for parts I can simply come on here
and add those parts to my inventory and then any wish list I have containing
those parts would be updated accordingly.

You can upgrade to seller and keep your store closed.

Or keep inventory on Rebrickable.com or with Brickstock.
 Author: Brickwilbo View Messages Posted By Brickwilbo
 Posted: Jun 11, 2020 13:49
 Subject: Re: Search for Wanted Parts in My Inventory
 Viewed: 15 times
 Topic: Suggestions
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Suggestions, CrispyBassist writes:
  Hello!

I'm finding it could be useful to be able to search my store inventory for
parts from my wanted lists, or for them to come up when I go to buy from my wanted
list. I would assume my the auto buy thing searches my store as well, but considers
the cost of the pieces. Maybe it could be improved to show parts from my store
as free for me (I have a buyer/seller account, rather than separate ones).

Thanks!
Matt

On your My Inventory page you can click in the Search option for Items in a Wantlist.
 Author: Brickwilbo View Messages Posted By Brickwilbo
 Posted: Jun 11, 2020 08:47
 Subject: Re: Bricklink Gift Cards
 Viewed: 39 times
 Topic: Suggestions
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Suggestions, captaincofresi writes:
  I would really welcome a Bricklink Gift Card, e.g. for 5, 10, 20, 50 euro. Since
that would be a perfect gift for me as a AFOL Lego designer. So a gift card that
anyone can buy directly online from the main Bricklink page, without needing
a membership or login. Because the people gifting, are mostly not Lego fans themself.

Bricklink consists of thousands of stores.
Who should hold the funds for the card?
 Author: Brickwilbo View Messages Posted By Brickwilbo
 Posted: Jun 4, 2020 05:52
 Subject: Re: We have a new Catalog Administrator!
 Viewed: 48 times
 Topic: Catalog
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
Congratulations.


In Catalog, Admin_Russell writes:
  Hello everyone,

I have some long-awaited news for you! We have created a new Catalog Admin position
which has privileges on both sides of the system, the catalog and inventories.
This is a culmination of about 3 years of work, and we are so proud of our first
ever member to take this position, Hygrotus.

He has steadily worked his way up to this level from his years of being an outstanding
and reliable contributor, to a special class of contributor known as an Inventories
Verifier, to one year experience as an Inv Admin, and then most recently about
14 months as a Catalog Associate. We are pleased that he has stuck with the program
and now is going to forge ahead.

We are combining the two "halves" of the system for many reasons, but the main
one being efficiency. If only one admin is available on a given weekend, for
example, we can take care of contributions on both sides, which are often dependent
on each other.

We will retain the Catalog Associate and Inv Admin positions for the purpose
of training new Catalog Admins. They will be considered transitory positions.

For more info on the Community Expert Program, please see this post:

https://www.bricklink.com/message.asp?ID=1196395

You may also visit our Community Expert Program page:

https://www.bricklink.com/memberAdmins.asp

and also read a few FAQs in the Help Center:

https://www.bricklink.com/help.asp?helpID=974
 Author: Brickwilbo View Messages Posted By Brickwilbo
 Posted: May 26, 2020 01:30
 Subject: Re: Comments during instant Checkout
 Viewed: 31 times
 Topic: Suggestions
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Suggestions, BHamBricks writes:
  I recently decided to add instant checkout to my store. I received my first
ever neutral feedback because I didn't include a note as requested in the
buyer's comment section. My suggestion is to add the buyer's comments
section on the sellers invoice (like it always has been on the invoice when an
invoice was requested). There is no buyer's comments section on the email
I receive notifying me that an order has been placed. In this instance, this
caused an unpleasant experience for the buyer.

In the order confirmation email under the shipping method is a 'Comments
from Buyer:' section. Below it are the items of the order.

The Comments from Buyer are also visible below the items on the orders details
page.
 Author: Brickwilbo View Messages Posted By Brickwilbo
 Posted: May 25, 2020 12:51
 Subject: Re: Cross matching wanted list and parts from set
 Viewed: 21 times
 Topic: Inventories
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Inventories, Bricksonbricks7 writes:
  Hello!

I wanted to see if anyone had any advice when it came to putting together incomplete
sets with the parts that you already have on your inventory? I'm looking
to cross match items on my wanted list, and the parts from a specific set but
every time I do that, all items that are on my wanted list appear instead.

Thank you in advance!

On your My Inventory page, on the right under search options, enter the set number
at Search items from set # and check Items on my Wantlist.
 Author: Brickwilbo View Messages Posted By Brickwilbo
 Posted: May 16, 2020 17:54
 Subject: Re: Add Zelle to payment offsite methods
 Viewed: 49 times
 Topic: Suggestions
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Suggestions, Heartbricker writes:
  We've been using Zelle, which is a Wells Fargo payment method to send/receive
money.
I believe it's only available in the USA but it is a payment method powered
by one of the largest banks in the US- Would it be possible to add this as an
offsite payment method? It is not currently showing on the long list of payment
method that we'd be able to add to our payment profiles as a seller.
Thanks for considering.

It's been suggested before:
https://www.bricklink.com/message.asp?ID=1104097
 Author: Brickwilbo View Messages Posted By Brickwilbo
 Posted: May 14, 2020 06:54
 Subject: Re: Auto messages for shipping options
 Viewed: 30 times
 Topic: Suggestions
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Suggestions, CaseyAF writes:
  Hi there,

It would be really good if in the sellers store shipping settings page we could
add in a automated message. For example I have a shipping option which is 'I'm
still shopping' it would be good if when someone selected this option it
automatically sent them a message like 'thanks for your order, please message
us withing 7 days to say you have completed your order so we may invoice you'.
It would save a lot of time from having to write them out for each individual
order. Even better would be if this whole shipping option was avaliable for all
sellers to select and turn on instead of making a shipping option and having
to put in prices (in which mine is 0 until the order is done then worked out
manually).

I think if you add a instant checkout shipping method without instant payment
a customized invoice can be send by using the HTML tags.
 Author: Brickwilbo View Messages Posted By Brickwilbo
 Posted: May 14, 2020 06:50
 Subject: Re: Option to update all stock prices
 Viewed: 38 times
 Topic: Suggestions
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Suggestions, CaseyAF writes:
  Hi there,

Is it possible to have a feature added to a sellers inventory in which everything
or selected catagorys can be update all at once to average pricing like on the
price guide? You can put sales on and increase and reduce prices by a certain
percent but not all items in that catagory will have gone up or down the same
amount so being able to put everything to this average pricing would be handy.

Some sellers use the Brickstock program for it.
 Author: Brickwilbo View Messages Posted By Brickwilbo
 Posted: May 12, 2020 15:40
 Subject: Re: Suggestion for Wanted Lists
 Viewed: 29 times
 Topic: Suggestions
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Suggestions, coreyschaaf writes:
  This may not have been an issue previously, but due to COVID-19, I am weary of
buying from international sellers as a result of reduced flights to and from
certain countries. I say that because through no fault of the seller, 5 of my
orders have been delayed by 2 months now. I still have no idea when / if I will
receive them.

The sellers I've dealt with have all been great (even with a language barrier)
but as a purchaser moving forward, I think it would make sense to see feedback
based on geographic location.

For example, if I'm a US buyer and I want to make a purchase from a store,
I've been finding that I go to the feedback, click on the person who left
the feedback and see where they are located. Doing that is entirely manual and
cumbersome. It would be so much easier to filter the feedback from a specific
location and I can see the most recent orders and feedback from that person by
on location. If they have plenty of US buyers, I can make an educated decision
about parcels still being shipped and reliability of those orders making it to
their destination.

Maybe others won't find that helpful, but as someone from the US that has
not received 5 of their orders, seems like a great way to find feedback from
others in my same area to make me feel more confident in buying from overseas
sellers.

Even after COVID - I think that feature makes a lot of sense.

You can turn on 'Show Country Flags in Feedback Profiles' here:
https://www.bricklink.com/feedbackSettings.asp?viewFrom=P
 Author: Brickwilbo View Messages Posted By Brickwilbo
 Posted: May 7, 2020 12:22
 Subject: Re: Items missing from Inventory after been added
 Viewed: 29 times
 Topic: Inventories
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Inventories, Superbar writes:
  Hi all,

I know I definitely added some particular items to my inventory some days ago
but now they seem to be missing?! Is it possible that if someone adds them to
their cart they are removed from my inventory even if they didn't buy them?
and is there any way to check this?

Kind regards

Bar

No items are removed from the inventory when in a cart.
Maybe the items are in a stockroom or you have a filter on.
 Author: Brickwilbo View Messages Posted By Brickwilbo
 Posted: May 6, 2020 16:57
 Subject: Re: Request to remove items from order...
 Viewed: 35 times
 Topic: Suggestions
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Suggestions, Gaston.La.Brick writes:
  The functionality to request to remove items from an order, generates an email
to the buyer with this request.
Email is fine!
However, the action that the buyer needs to take (accept or reject, I guess)
is not in that email! It's absolutely unclear where the buyer can accept
this change!
In short: put a functioning link in that email that points to the action(s) that
need to be taken please. I still haven't found where to accept the request.

https://www.bricklink.com/retractOrderItem.asp
 Author: Brickwilbo View Messages Posted By Brickwilbo
 Posted: May 3, 2020 07:14
 Subject: Re: Please add new Forum Topic
 Viewed: 34 times
 Topic: Suggestions
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Suggestions, calsbricks writes:
  To save the almost constant threads that come up in the forum for things like
dealing with shipping to , as well as sales history as well as .... Please add
a new topic to the forum for Knowledgebase items.

That way Brickwilbo and others can refer people to the knowledgebase area for
their answers - it will save a lot of time and effort on everyone's part.

The Help tab should return to the top of the page.
 Author: Brickwilbo View Messages Posted By Brickwilbo
 Posted: May 3, 2020 06:59
 Subject: Re: Please add new Forum Topic
 Viewed: 35 times
 Topic: Suggestions
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Suggestions, SylvainLS writes:
  In Suggestions, calsbricks writes:
  To save the almost constant threads that come up in the forum for things like
dealing with shipping to , as well as sales history as well as .... Please add
a new topic to the forum for Knowledgebase items.

That way Brickwilbo and others can refer people to the knowledgebase area for
their answers - it will save a lot of time and effort on everyone's part.

I’d say most of the answers should be in the help pages….
(Brickwilbo points to them when they are. The rest of the time, we copy-paste….)

😉
 Author: Brickwilbo View Messages Posted By Brickwilbo
 Posted: Apr 30, 2020 01:20
 Subject: Re: Organize Want List
 Viewed: 25 times
 Topic: Suggestions
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Suggestions, burghbricks writes:
  If it's feasible, it'd be nice to be able to organize your want lists
into custom categories. For example, I'd like to be able to have categories
for MOCs, Restoration, and so on. That way I could quickly find lists without
having to change the order or toggle categories to hide them what I don't
immediately need.

I name my Wantlists for their intended porpose.
 Author: Brickwilbo View Messages Posted By Brickwilbo
 Posted: Apr 25, 2020 06:32
 Subject: Re: Stock Room Versus Sellable inventory
 Viewed: 31 times
 Topic: Inventories
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Inventories, LEGO_ROB_2020 writes:
  I have entered a couple of "Inventory" Items but have designated them as "Stock
Room". I can't figure out how to get back to the stockroom list to edit it.

On top of the Categories on the My Inventory page you can click on different
viewing option.
Click on By Availability.
 Author: Brickwilbo View Messages Posted By Brickwilbo
 Posted: Apr 23, 2020 14:43
 Subject: Re: Wanted list on inventory?
 Viewed: 23 times
 Topic: Inventories
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Inventories, Bricksonbricks7 writes:
  Hi all!

I'm trying to reconstruct a set and I was wondering if there's a way
to check my wanted list on my own inventory? I see that I can view all items
in my wanted list on my inventory, but I just need to check ONE specific wanted
list. Is there a way to do this?

Collapse the extra search options on the right of the My Inventory page.
Click Items on my Wantlist.
 Author: Brickwilbo View Messages Posted By Brickwilbo
 Posted: Apr 20, 2020 14:16
 Subject: Re: Order Item Removal Request
 Viewed: 33 times
 Topic: Suggestions
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Suggestions, atkk writes:
  Hello,
Can a link for "Order Item Removal Request" please be added to the page for when
a seller view's an order, so that it can be found much easier.
Thanks
Andre

Already suggested.😉
Vote here: https://www.bricklink.com/message.asp?ID=1050359
 Author: Brickwilbo View Messages Posted By Brickwilbo
 Posted: Apr 20, 2020 02:21
 Subject: Re: A few more Preference options
 Viewed: 45 times
 Topic: Suggestions
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Suggestions, JWBDolphins writes:
  Here are a couple Preference options I'm suggesting be considered.

First, when I open one of my Wanted Lists, it Always defaults to 25 items per
page. Most of my Wanted Lists are larger than that and I have to Change the
default size every time (so that I can see everything on 1 screen). With internet
speeds the way they are today, 100 items pop up quickly. I would like to see
the number of items per page be an option that is remembered. (In fact, in general
I would like to see number of items per page be a preference saved across Bricklink.)

Yes. It has been suggested before.

  
Secondly, along these lines, I would like to see a few more preferences saved
when I select a part. Specifically, a lot of times I have to click "More Options"
and I always have to select "Seller Location". I would like to see both of those
as saved options so I don't have to select them every time I bring up a new
part.

You can select location:
https://www.bricklink.com/wantedSettings.asp?viewFrom=P

  
Thanks for your consideration!

Next Page: 5 More | 10 More | 25 More | 50 More | 100 More