Discussion Forum: Catalog(Post New Message)
Redisplay Messages: Compact | Brief | All | Full      Show Messages: All | Without Replies

View Thread Re: Hose, Rigid 3mm D. length difference - Brickitty (6437)
[...] I'm sorry, those numbers should read either "2 to 3 millimeters" or "0.2 to 0.3 centimeters." My bad.
(46 months ago, Jul 14, 2020, to Catalog)
View Thread Hose, Rigid 3mm D. length difference - Brickitty (6437)
I just went through over 200 used and new parts from the category Hose, Rigid 3mm D. (75c03 up to 75c28), and I measured all of them with a ruler. I found that, for both [...]
(46 months ago, Jul 14, 2020, to Catalog)
View Thread Re: Key chain 853992 - Admin_Russell
[...] The interesting thing about that post is that those are actually NOT what I would consider to be in the same category as the new Satin colors. I know I said that at the [...]
(46 months ago, Jul 14, 2020, to Catalog)
View Thread Re: Chrome silver Roborider wheels - Cob (3563)
[...] There was a shop who would chrome parts, maybe it is a custom chrome job.
(46 months ago, Jul 14, 2020, to Catalog)
View Thread Re: Key chain 853992 - Turez (43)
[...] You are probably right. I think I was confused by that other discussion where nobody mentioned that the black brick might be chrome and not satin/opal/whatever. Request [...]
(46 months ago, Jul 14, 2020, to Catalog)
View Thread Re: Key chain 853992 - Hygrotus (869)
[...] Chrome black is also this container on the outside (Part 29632c07pb01) look at the note I think this brick is chrome black
(46 months ago, Jul 14, 2020, to Catalog)
View Thread Re: Key chain 853992 - Turez (43)
[...] To be honest, I have no idea. :D When submitting the new key chains, I just tried to follow what was said here: (URL) There isn't any other part in Satin Black in [...]
(46 months ago, Jul 14, 2020, to Catalog)
View Thread Key chain 853992 - WoutR (919)
I just noticed this key chain in the catalog. The current name is " 2 x 4 Brick - Satin Black Key Chain". Should that not be "2 x 4 Brick - Chrome Black Key Chain"? Or am I [...]
(46 months ago, Jul 14, 2020, to Catalog)
View Thread Chrome silver Roborider wheels - Schredder (3655)
Hi all, yesterday i recovered my roborider wheel collection from early this century and decided to sell it. In the meantime i know about the metallic gold ones (from e. [...]
(46 months ago, Jul 14, 2020, to Catalog)
View Thread Re: 973pb0303 torso in yellow? - Primicia (85)
[...] Thanks!
(46 months ago, Jul 13, 2020, to Catalog)
View Thread Re: 973pb0303 torso in yellow? - Primicia (85)
[...] Thanks!
(46 months ago, Jul 13, 2020, to Catalog)
View Thread Re: 973pb0303 torso in yellow? - Cob (3563)
[...] (Part 973pb0488c01)
(46 months ago, Jul 13, 2020, to Catalog)
View Thread Re: 973pb0303 torso in yellow? - FantasyBricks (331)
[...] Is this what you are looking for? (Part 973pb0488c01)
(46 months ago, Jul 13, 2020, to Catalog)
View Thread 973pb0303 torso in yellow? - Primicia (85)
Hi I just found this minifigure. But I can only find 973pb0303 in orange. So how can I add this color?
(46 months ago, Jul 13, 2020, to Catalog)
View Thread Re: 75939 - axaday (7301)
[...] Excellent. I WILL want to get some of those baby Dinos at some point, but I think I can wait for clearance.
(46 months ago, Jul 12, 2020, to Catalog)
View Thread Re: 75939 - Soviet (337)
[...] Alright, I'll do it. I recently got the parting-out ich and it looks pretty interesting.
(46 months ago, Jul 12, 2020, to Catalog)
View Thread Re: 75939 - axaday (7301)
[...] I'm sorry if I seemed to imply it, but I am not planning to do the set at this time. I have all I need on my plate at the moment.
(46 months ago, Jul 12, 2020, to Catalog)
View Thread Re: 75939 - randyf (442)
[...] They have communicated that they are not going to do the inventory. I will free it up for you.
(46 months ago, Jul 12, 2020, to Catalog)
View Thread Re: 75939 - axaday (7301)
[...] I bought the other sets to inventory them, but at the time this one was reserved by someone else. It isn't clear now whether they decided not to do it or their reservation [...]
(46 months ago, Jul 12, 2020, to Catalog)
View Thread Re: 75939 - jennnifer (3531)
[...] BrickLink inventories are and have always been submitted by BrickLink members. [...] I seriously doubt LEGO is generating wealth from this little site. [...] We [...]
(46 months ago, Jul 12, 2020, to Catalog)
View Thread 75939 - skikyssing (1636)
Hi, The inventory of the 75939 has been added on june first. but we can not still part out the set. I guess Lego do not care about getting fees from Bricklink... Lego should hire [...]
(46 months ago, Jul 12, 2020, to Catalog)
View Thread Re: With and without groove in one set - primadeluxe (433)
All of them are with groove. I made a change request as you asked. In Catalog, randyf writes: [...]
(46 months ago, Jul 12, 2020, to Catalog)
View Thread Re: How to combine parts into a new c01 entry? - StormChaser (565)
[...] When we're redoing the catalog guidelines we'll take this into consideration. I'm not opposed to these entries on principle, just for the potential they [...]
(46 months ago, Jul 12, 2020, to Catalog)
View Thread Re: How to combine parts into a new c01 entry? - axaday (7301)
[...] I assume you are being facetious, but yeah. I would add them as counterparts in the set also. I think it is an item that people will be interested in buying and they [...]
(46 months ago, Jul 11, 2020, to Catalog)
View Thread Re: How to combine parts into a new c01 entry? - StormChaser (565)
[...] Would I be accurate in assessing your comments to say that you support the addition of combined tray/lid catalog entries for Dots sorting containers?
(46 months ago, Jul 11, 2020, to Catalog)
View Thread Re: How to combine parts into a new c01 entry? - axaday (7301)
[...] I don't think I have received a Dots set in a box yet. No problem there. [...] There is only one way to put a Dots lid with a Dots tray, unless you count rotations. [...]
(46 months ago, Jul 11, 2020, to Catalog)
View Thread Re: NEX117 missing his legs - Pippysblocks (4738)
No probs Stormchaser, I'll do this in the morning, I'll add a picture for the armor too as it doesn't have one for dark blue. Just wasn't sure on the correct [...]
(46 months ago, Jul 11, 2020, to Catalog)
View Thread Re: NEX117 missing his legs - randyf (442)
[...] [...] +1 I can't stand incomplete inventories and try to avoid them at all costs. Some inevitably get through for things like gear items, but there really is no [...]
(46 months ago, Jul 11, 2020, to Catalog)
View Thread Re: How to combine parts into a new c01 entry? - StormChaser (565)
[...] That's a fair question. The reason is that the BrickLink catalog is very inconsistent. It's difficult to know if an item will be approved or not and we get [...]
(46 months ago, Jul 11, 2020, to Catalog)
View Thread Re: How to combine parts into a new c01 entry? - Stellar (3479)
[...] Maybe you can sell this in: (URL)
(46 months ago, Jul 11, 2020, to Catalog)
View Thread Re: NEX117 missing his legs - axaday (7301)
[...] Torsos are added with no pics all the time for people who submit assemblies only. The torso assembly gets inventoried with a part that really only has a ghost in the [...]
(46 months ago, Jul 11, 2020, to Catalog)
View Thread Re: How to combine parts into a new c01 entry? - Leftoverbricks (2224)
[...] Why? When you look at reviews of Dots sets the boxes are very positively received and have potential resale value. Going the historically ‘correct’ procedure that similar [...]
(46 months ago, Jul 11, 2020, to Catalog)
View Thread Re: construction vehicles - StormChaser (565)
[...] Honestly, we were just being silly. You're welcome to request category changes to any set in the catalog with this form: (URL) The category definitions are here: [...]
(46 months ago, Jul 11, 2020, to Catalog)
View Thread construction vehicles - TiceRex (2)
As far as I remember I have asked it already a few years ago, but I can't find any trace now. The sets 31014 and 31041 consist equally 64 parts, the size and proportions [...]
(46 months ago, Jul 11, 2020, to Catalog)
View Thread Re: NEX117 missing his legs - StormChaser (565)
[...] Other than reading through all inventory notes, no. We discussed it at the time administratively and decided that a partial inventory was preferable to no inventory [...]
(46 months ago, Jul 11, 2020, to Catalog)
View Thread Re: How to combine parts into a new c01 entry? - axaday (7301)
[...] The procedural answer to your question is that you would add 907957c01 to the catalog as a new item and then inventory it with both of the pieces. But don't do it [...]
(46 months ago, Jul 11, 2020, to Catalog)
View Thread Re: NEX117 missing his legs - axaday (7301)
[...] The process at the time was that he showed up in the list of minifigs that needed to be inventoried. Now he still needs to be inventoried, but he doesn't show up [...]
(46 months ago, Jul 11, 2020, to Catalog)
View Thread Re: NEX117 missing his legs - axaday (7301)
[...] Now he is rare.
(46 months ago, Jul 11, 2020, to Catalog)
View Thread Re: How to combine parts into a new c01 entry? - StormChaser (565)
[...] I don't think this is something that would be approved. No other tray/bucket/base and lid combinations are in the catalog as combined entries that I'm aware [...]
(46 months ago, Jul 11, 2020, to Catalog)
View Thread Re: NEX117 missing his legs - StormChaser (565)
[...] The legs simply need to be added to the catalog and then to the figure inventory. It's essentially the same process now as it was then. Pippyblocks, submit the legs [...]
(46 months ago, Jul 11, 2020, to Catalog)
View Thread How to combine parts into a new c01 entry? - Leftoverbricks (2224)
I'ld like to see a new entry in the catalog for the combination of these: (Gear 901956) and (Gear 901957) When I'm correct in those cases a new part number is required [...]
(46 months ago, Jul 11, 2020, to Catalog)
View Thread Re: NEX117 missing his legs - axaday (7301)
[...] I wish that hadn't been done. It would have been a lot easier to fix at the time than it is now.
(46 months ago, Jul 11, 2020, to Catalog)
View Thread NEX117 missing his legs - Pippysblocks (4738)
Just about to part out some (Minifigure nex117) and I realise he appears to a bit legless. How do these get added to the catalog? Many thanks,
(46 months ago, Jul 11, 2020, to Catalog)
View Thread Re: Are there sets with seperate Parts Lists or.. - peterab (526)
[...] I've seen pictures of a wooden box set from the 60's that had a printed parts list. Of course because of the age these are rare. If I remember correctly it was [...]
(46 months ago, Jul 11, 2020, to Catalog)
View Thread Re: With and without groove in one set - primadeluxe (433)
Submitted the changes for the red 44301. I shall have a look at the black 44301 and 44302. In Catalog, randyf writes: [...]
(46 months ago, Jul 11, 2020, to Catalog)
View Thread Re: With and without groove in one set - randyf (442)
[...] Yes, that is correct. Could you also check and change the undetermined black hinge plates in the set? (Part 44301,11) (Part 44302,11) Cheers, Randy
(46 months ago, Jul 11, 2020, to Catalog)
View Thread Re: With and without groove in one set - SylvainLS (46)
[...] Yep.
(46 months ago, Jul 11, 2020, to Catalog)
View Thread Re: With and without groove in one set - primadeluxe (433)
OK, thanks to you all. So if I read it right, I should submit two red 44301a as regular and two red 44301b as alternate and delete the two red 44301? In Catalog, paulvdb writes: [...]
(46 months ago, Jul 11, 2020, to Catalog)
View Thread Re: With and without groove in one set - paulvdb (7139)
[...] As others already mentioned, this is common with some part variants if borh were in production at the same time. In such a case one of the variants should be in the inventory [...]
(46 months ago, Jul 10, 2020, to Catalog)
View Thread Re: With and without groove in one set - SylvainLS (46)
[...] Yep.  And BL’s inventories shouldn’t be read as “you either get N of this variant or N of that one” but as “you N parts total, either of this or that variant.” So each [...]
(46 months ago, Jul 10, 2020, to Catalog)
View Thread Re: With and without groove in one set - Brickitty (6437)
[...] Yes, it's normal. I just opened hundreds of sealed sets from 2015-2017 and another few dozen individual sealed bags from 2005-2018. Not only is it normal to have [...]
(46 months ago, Jul 10, 2020, to Catalog)
View Thread Re: With and without groove in one set - BricksThatStick (6351)
[...] A sealed set sounds like a strong case to remove the undetermined type and add what you actually found as regular and alternate parts :)
(46 months ago, Jul 10, 2020, to Catalog)
View Thread With and without groove in one set - primadeluxe (433)
In a sealed set 4203 I found the red 44301 with and without groove. Is it normal to have different variations of one part in one set? Should it be noted or is the Undetermined [...]
(46 months ago, Jul 10, 2020, to Catalog)
View Thread Re: 3001oldb Blue - Stuart9 (1015)
Sadly neither do I anymore. In Catalog, WoutR writes: [...]
(46 months ago, Jul 9, 2020, to Catalog)
View Thread Re: 3001oldb Blue - WoutR (919)
[...] I would love to see an inventory for x1447c01 in the catalog, but I don't have the parts to add them. And we also need a catalog entry for the Duplo pull cart with [...]
(46 months ago, Jul 9, 2020, to Catalog)
View Thread 3001oldb Blue - Stuart9 (1015)
This must have been discussed before but I don't remember anything and I can't find any postings. Sets 501-3 and 042-1 don't have an inventory list for the vehicle [...]
(46 months ago, Jul 9, 2020, to Catalog)
View Thread Re: Collecting the parts catalog - WoutR (919)
[...] That is one of the lists I started with. There are more than 42... But I am STILL missing one of those! I can't believe how difficult it is to find number 31! [...]
(46 months ago, Jul 9, 2020, to Catalog)
View Thread Re: Collecting the parts catalog - antant7 (627)
[...] Sometimes if feels like my girlfriend is actively trying to do exactly that! We get a new lot in, she does the rough sorting and assembly of any interesting sets she [...]
(46 months ago, Jul 9, 2020, to Catalog)
View Thread Re: Collecting the parts catalog - SylvainLS (46)
[...] There’s an onlive live tour (part 3 was today) (URL) Not sure if they will make them available for download sometime. Anyway, I’d say you’re right on your assesment: [...]
(46 months ago, Jul 9, 2020, to Catalog)
View Thread Re: Collecting the parts catalog - yorbrick (1181)
[...] There is a historical section which covers the history of the company and the development of products, from wooden toys (and barns) through to more modern day [...]
(46 months ago, Jul 9, 2020, to Catalog)
View Thread Re: Collecting the parts catalog - StormChaser (565)
[...] I've never visited, but from reviews I've read and pictures I've seen this facility does not match the definition of a true LEGO museum in the way we've [...]
(46 months ago, Jul 9, 2020, to Catalog)
View Thread Re: Collecting the parts catalog - yorbrick (1181)
[...] There is the LEGO HOUSE in Billund that documents the history of both the company and the product.
(46 months ago, Jul 9, 2020, to Catalog)
View Thread Re: Collecting the parts catalog - StormChaser (565)
[...] Not so. It would be nice to have official approval, of course, but a museum could open and operate just fine without it. It just couldn't advertise itself as a [...]
(46 months ago, Jul 9, 2020, to Catalog)
View Thread Re: Collecting the parts catalog - leggodtshop (3861)
[...] Do you intent all the parts known to BrickLink? Or all the parts that exist? E.g. the 3001 brick comes in 3 major differences on BrickLink, but if you count all the (technical) [...]
(46 months ago, Jul 9, 2020, to Catalog)
View Thread Re: Collecting the parts catalog - gunga (2379)
A LEGO museum would be a fantastic idea. Dedicated to the history of the bricks with the parts collection being the highlight. Similar places already exist that highlight specific [...]
(46 months ago, Jul 9, 2020, to Catalog)
View Thread Re: Are there sets with seperate Parts Lists or.. - leggodtshop (3861)
[...] I mean parts lists on paper, like instructions, that come in the box... :)
(46 months ago, Jul 9, 2020, to Catalog)
View Thread Re: Brick 3001oldpb03 with LUFTHANSA - BricksThatStick (6351)
[...] Just submit a catalog request - I have just done this one. Thanks for spotting it. [...]
(46 months ago, Jul 9, 2020, to Catalog)
View Thread Re: Brick 3001oldpb03 with LUFTHANSA - primadeluxe (433)
Yeah, I thought so! But just checking as I am affraid to replace the stickers and damage them. The bricks who are not according to the instructions and I remember, are indeed [...]
(46 months ago, Jul 9, 2020, to Catalog)
View Thread Re: Brick 3001oldpb03 with LUFTHANSA - BricksThatStick (6351)
[...] Stickered parts should only be accepted if they are exactly as show in the instructions. So in this case it would need to be as a special assembly I'm afraid. In [...]
(46 months ago, Jul 9, 2020, to Catalog)
View Thread Brick 3001oldpb03 with LUFTHANSA - primadeluxe (433)
I have one brick 3001oldpb03 with on both sides a LUFTHANSA stickers from set 1560, but according to the instructions the stickers had to be on two bricks 3001oldpb03. Is it [...]
(46 months ago, Jul 9, 2020, to Catalog)
View Thread Are there sets with seperate Parts Lists or.. - leggodtshop (3861)
Are there LEGO sets with seperate Parts Lists or Inventory Lists? The Catalog defines packaging and instructions and other books etc. I would like to know if there are also parts [...]
(46 months ago, Jul 9, 2020, to Catalog)
View Thread Re: Collecting the parts catalog - SylvainLS (46)
[...] A bit like for the eradication of diseases like malaria or tuberculosis, or to end of world hunger, or to attain global world peace… ;):P
(46 months ago, Jul 9, 2020, to Catalog)
View Thread Re: Collecting the parts catalog - StormChaser (565)
[...] Not really a long-term project, just one that someone would have to throw some $$ at (it would be a permanently ongoing project, of course). Basically what you're [...]
(46 months ago, Jul 8, 2020, to Catalog)
View Thread Re: Collecting the parts catalog - gunga (2379)
Such a collection would be an invaluable tool for the hobby, to be sure. While 1 person probably couldn't do it, dozens of people could. Just an idea - Bricklink recruits [...]
(46 months ago, Jul 8, 2020, to Catalog)
View Thread Re: Collecting the parts catalog - Andrsv (2832)
[...] I'm trying, I've spent almost €20.000 so far :) But only got 13.000 lots so far. And I have duplicates as I distinguish new and used parts :) This store [...]
(46 months ago, Jul 8, 2020, to Catalog)
View Thread Re: Collecting the parts catalog - SylvainLS (46)
[...] Guh, it’s obvious now you say it ;):D [...] And including composites. Like wheel + tyre or torso + arms + hands. So it’s still both including too many parts and [...]
(46 months ago, Jul 8, 2020, to Catalog)
View Thread Re: Collecting the parts catalog - hpoort (410)
[...] That shows the PCC list is far from complete and includes many duplicates (variants not distinguished by Bricklink). The easier answer finally came to me: it [...]
(46 months ago, Jul 8, 2020, to Catalog)
View Thread Re: Collecting the parts catalog - SylvainLS (46)
[...] As of a few minutes ago, there were 52,433 PCC for parts in the catalogue. But 17,695 have a “p” in their ID. That generally means they are decorated but some are just [...]
(46 months ago, Jul 7, 2020, to Catalog)
View Thread Re: Collecting the parts catalog - hpoort (410)
[...] With over 60.000 parts in the catalog (14.969 without pattern, (URL) it is a challenge indeed. Some shops come a long way: (URL) (But you can't really trust [...]
(46 months ago, Jul 7, 2020, to Catalog)
View Thread Re: Collecting the parts catalog - WoutR (919)
[...] I have almost all the decorated 2x4 bricks. That is challenging enough. Collecting the catalog would be Awesome, but I don't have the time and money to even make [...]
(46 months ago, Jul 7, 2020, to Catalog)
View Thread Re: Collecting the parts catalog - yorbrick (1181)
[...] Do you mean including printed parts and printed minifigure parts? As then it becomes almost a collection of all minifigures too. I think they look better as minifigures [...]
(46 months ago, Jul 7, 2020, to Catalog)
View Thread Re: Collecting the parts catalog - iprice (1245)
[...] It would be a never-ending and very expensive hobby, that's for sure!
(46 months ago, Jul 7, 2020, to Catalog)
View Thread Collecting the parts catalog - gunga (2379)
Just a random thought that came to me while sorting pieces... Has anyone tried to collect, and complete, the parts catalog? In other words, collecting every part in every know [...]
(46 months ago, Jul 6, 2020, to Catalog)
View Thread Re: But they’re the same! - StormChaser (565)
[...] Please see this message: (URL) Yes, the Cars items do need to be addressed.
(46 months ago, Jul 6, 2020, to Catalog)
View Thread But they’re the same! - BulbaNerd4000 (4)
I noticed that the Cars 3 cars are classified as minifigures. The older ones for 1 and 2 in 2011 are built in pretty much the same way, but are not minifigs. How does this make [...]
(46 months ago, Jul 6, 2020, to Catalog)
View Thread Re: Smooth Slopes - primadeluxe (433)
Also there are slopes which have a smooth variation which are not in the catalog, like 3045. Besides that, where is the end? I could easely point out slopes with 'very rough' [...]
(46 months ago, Jul 6, 2020, to Catalog)
View Thread Re: Smooth Slopes - howdyhamster (60)
[...] You are correct that I haven't seen a rough one. Having recently organized my collection, I would actually prefer for the catalog to be simplified a bit, as some [...]
(46 months ago, Jul 6, 2020, to Catalog)
View Thread Re: Smooth Slopes - Admin_Russell
[...] Yes, there is a whole set of those with very nice photos on BrickLink that show the smoothness of the surface. But the question would be, does it make a difference when [...]
(46 months ago, Jul 6, 2020, to Catalog)
View Thread Re: Sprues - Adjour (2448)
[...] Again, no skin in this game, was just making conversation. I'm always surprised how seriously some of this catalog stuff is taken by people. I know I personally [...]
(46 months ago, Jul 6, 2020, to Catalog)
View Thread Re: Smooth Slopes - howdyhamster (60)
[...] The McDonald's 30474 slopes I have are definitely smooth with a printed pattern over the smooth surface. (Part 30474pb03)
(46 months ago, Jul 5, 2020, to Catalog)
View Thread Re: Smooth Slopes - normann1974 (2291)
[...] And of course, as someone else wrote: This slope without print also exists in a smooth version (or it always comes as smooth, I'm not sure about that). It [...]
(46 months ago, Jul 5, 2020, to Catalog)
View Thread Re: Smooth Slopes - normann1974 (2291)
[...] In fact, the slope in question is (Part 3678ap01). I just checked it again. It's smooth and shiny. No sign of texture at all. /Jan
(46 months ago, Jul 5, 2020, to Catalog)
View Thread Re: Smooth Slopes - normann1974 (2291)
[...] I have my doubts if these actually exist, and if they do, that they are identified correctly in current inventories. I have only ever seen one slope with a smooth and [...]
(46 months ago, Jul 5, 2020, to Catalog)
View Thread Re: Smooth Slopes - bricks2you (12916)
I vote yes In Catalog, StormChaser writes: [...]
(46 months ago, Jul 5, 2020, to Catalog)
View Thread Re: Smooth Slopes - Brickitty (6437)
[...] Yes, please get rid of the entries for smooth slopes. They're the only entries in the catalog that I heartily dislike, so much so that I've actually ranted to [...]
(46 months ago, Jul 4, 2020, to Catalog)
View Thread Re: listing board games - BellaFux (138)
Thanks so much! Found them!! In Catalog, Stuart9 writes: [...]
(46 months ago, Jul 4, 2020, to Catalog)
View Thread Re: listing board games - cycbuild (827)
[...] (Gear G3856) (Gear G3841) (Gear 3843)
(46 months ago, Jul 4, 2020, to Catalog)
View Thread Re: listing board games - Stuart9 (1015)
They are listed under gear, then games. In Catalog, BellaFux writes: [...]
(46 months ago, Jul 4, 2020, to Catalog)
View Thread listing board games - BellaFux (138)
Hello, not sure if this is the correct forum, but I would like to know how I can list my LEgo board games for sale. 3856 Ninjago Board Game 3841 Minotaurus Board Game 3843 [...]
(46 months ago, Jul 4, 2020, to Catalog)
View Thread Re: Smooth Slopes - edk (9164)
[...] That's the one
(46 months ago, Jul 4, 2020, to Catalog)

Next Page: 5 More | 10 More | 25 More | 50 More | 100 More