Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies| Author: | Emperor_Penguin  | | Posted: | Jan 12, 2019 14:00 | | Subject: | Lego 2018 Employee parts | | Viewed: | 239 times | | Topic: | Inventories | | Status: | Open | |
|
| Hi, here's the part list for set 4002018-1 if someone would like to add the
pieces.
Looks like the only new pieces are the Figure Torsos and Santa's printed
face piece.
The set also comes with 4 instruction booklets. I also have a photo of the figures
someone if someone could add them to the catalog.
(There are 7 photos total)
Thanks
|
|
 |
| Author: | FreeStorm | | Posted: | Jan 10, 2019 17:45 | | Subject: | Wrong Decorated panel for set 6361-1 | | Viewed: | 105 times | | Topic: | Inventories | | Status: | Open | |
|
| Hello,
Something is wrong with inventory of set
My stickers do not correspond to catalog sticker sheet
is it multiple version? I have the same number 190145 on my stickers
As you can see at the attached picture (this picture is not from my set) the
stickers is the same as this part.
The Arrow is "Left Pattern" on both parts.
If we say the stickers is only attached on "Panel 1 x 4 x 3"
Do need I add a new part:
"Panel 1 x 4 x 3 with Box and Arrow Left Pattern (Sticker) - Set 6361"
Or we modify
- To remove note (both parts are the same on set 6361-1)
- To change set on part name
PS: I hope you can understand what I have in my mind 
-Fred
|
|
|
| Author: | bb1302345 | | Posted: | Jan 7, 2019 11:48 | | Subject: | 5804 Belville witch's cottage | | Viewed: | 57 times | | Topic: | Inventories | | Status: | Open | |
|
| Dear community,
The inventory list at bricklink for 5804 (Belville witch's cottage) states
the inclusion of 1 trans-red plate, round 1x1 straight side (4037). However when
reading the instructions, it seems that 2 could be included: 1 at the top of
the yellow bottle and 1 underneath the skeleton head inside the globe. However,
this is difficult to see. Can anyone help here?
Thanks,
Pieter
|
|
| Author: | Tenne | | Posted: | Jan 6, 2019 15:30 | | Subject: | Missing piece in set 6246 | | Viewed: | 94 times | | Topic: | Inventories | | Status: | Open | |
|
| Hi BrickLink,
the partlist of set 6246-1 (LegoCrocodile Cage) is missing a part.
Part thats missing: 4498 (LegoMinifigure, Arrow Quiver with Two Arrows).
I own two of the sets and controlled the instructions.
Best Regards
Thomas
|
| Author: | silver | | Posted: | Jan 5, 2019 02:24 | | Subject: | Pop-Up Party Bus (70828-1) | | Viewed: | 116 times | | Topic: | Inventories | | Status: | Open | |
|
| Part 92593 (Plate, Modified 1 x 4 with 2 studs) in Coral should
be changed to the newer mold type 41740. The catalog page for 92593 shows
one known appearance.
|
| Author: | StoreToys4Boys | | Posted: | Jan 1, 2019 19:18 | | Subject: | Just add 5000 parts and now they disapear ? | | Viewed: | 138 times | | Topic: | Inventories | | Status: | Open | |
|
| I just part out 5000 parts and now they disapear.
I just use part out function from a set and it did add all the parts and price
to my inventory.
I just reload my store page to see 308,386 parts but 2 minutes later its back
to 302,722 and all the new part are not there anymore.They are not in stockroom
they are just not there.
Anybody else ever got that problem?
|
|
| Author: | normivey | | Posted: | Dec 30, 2018 23:27 | | Subject: | Parts not showing on set inventory pages? | | Viewed: | 60 times | | Topic: | Inventories | | Status: | Open | |
|
| I've come cross a couple of discrepancies with different sets today. Parts
that are identified as being part of a set from the parts page did not show up
in the set's inventory page. Two examples:
The parts page for 15444 Brick, Modified 1 x 1 x 2 with Square Hole indicates
that it is included in set 70808 Super Cycle Chase, but when I look at the inventory
for that set, it's not listed.
The parts page for 15429 Cat Tail indicates that it is included in set 41067,
but it is not listed on the inventory page for that set.
Is this only happening to me, or are others seeing the same discrepancies?
|
|
| Author: | POPS_BLOCK_SHOP | | Posted: | Dec 29, 2018 20:30 | | Subject: | BrickLink Store Video Update | | Viewed: | 103 times | | Topic: | Inventories | | Status: | Open | |
|
| We are finally growing at a more desired pace! Feel free to follow along for
the ride!
Bricklink Store Overview
https://youtu.be/arFXJncQ7RU
|
| Author: | agulus | | Posted: | Dec 27, 2018 12:16 | | Subject: | 3862 - "mixed" parts | | Viewed: | 59 times | | Topic: | Inventories | | Status: | Open | |
|
| I just bought new sealed: [Gear=3862]
and I found out that there were "mixed" 2 types of one part:
2 parts (tan):
8 parts (tan):
instead of 10 of one type only.
I think that putting a note for the sellers to be careful
about that "mix" in the Game would be helpful.
Agnes
|
| Author: | runner.caller | | Posted: | Dec 15, 2018 11:35 | | Subject: | Extra Sticker set in Indoraptor Rampage | | Viewed: | 51 times | | Topic: | Inventories | | Status: | Open | |
|
| I got 2 sticker sets (75930stk01) in set 75930-1.
Anyone else experience this?
|
|
| Author: | mockingbird | | Posted: | Dec 8, 2018 05:42 | | Subject: | set 10205 extra parts question | | Viewed: | 43 times | | Topic: | Inventories | | Status: | Open | |
|
| As far as I can see (maybe I overlooked something):
In the regular section of the inventory there are parts that are not used in
the main model (and the instructions or box do not show any secondary model):
1x black brick 1x2
2x black plate 1x1 clip horizontal
2x black slope inverted 75 2x1x3
1x black tile 1x4
But then in the extra parts section of set 10205 are 2x black panel 1x2x3 (2362b).
Shouldn't these two panels also be moved to the regular section?
Or should all these parts be moved to the 'extra' section as the secondary
model is not in the instructions?
|
|
| Author: | xxxzanka | | Posted: | Dec 4, 2018 15:53 | | Subject: | 42082 extra items | | Viewed: | 76 times | | Topic: | Inventories | | Status: | Open | |
|
| It seems to me one trans clear 1x1 plate is missing as extra parts (I have 3
in step 8 bags, 2 used in step 8).
Giancarlo
|
|
| Author: | Stuart9 | | Posted: | Dec 2, 2018 10:02 | | Subject: | Just a note for inventory admin | | Viewed: | 104 times | | Topic: | Inventories | | Status: | Open | |
|
| Total list of differences/confirmations found in my 7586-1
White 92950 x 2 not 3455 x 2
Trans light blue 60581 x 1 not 4215b x 1
Orange 4532 x 2 not 4532a x 2
Trans neon orange 6126b x 1 not 6126 x 1
White 60581 x 1 not 4215b x 1
Bright pink 4589b x 1 not 4589 x 1
Trans orange 4589b x 5 not 4589 x 5
White 3684c x 2 not 3684a x 2
3626c x 1 not 3626b x 1 ( already discussed )
3626c x 2, 3626b x 2 not 3626b x 4 ( already discussed )
Also found what is already listed as alternative :
Light blue grey 4599b x 1
White 60032 x 1
Found :
White 44728 x 1 is the 92411/21712 version
Undetermined item
2453 x 4, mine are 2453a x 4
Hope this is of use, even if it is just to be noted.
Beside the heads there is at least one listed above that doesn't fit existing
listed usage dates.
Happy to provide photo's if required.
|
|
| Author: | SurplusParts | | Posted: | Nov 26, 2018 05:22 | | Subject: | Inventory for 10764 | | Viewed: | 37 times | | Topic: | Inventories | | Status: | Open | |
|
| Hi there,
I was just wondering what happened with the inventory for 10764, Juniors City
Central Airport.
I bought a couple of them a few weeks ago and I was going to do the inventory
for it. Then I saw that the inventory was pending approval so I pulled the sets
apart and put some in my store and left some aside for another day.
Now it is back to N/A.
Obviously it needs to be inventoried??
Cheers
Douglas
|
|
| Author: | bb327324 | | Posted: | Nov 12, 2018 14:13 | | Subject: | Differences between two Winter Toy Shop | | Viewed: | 75 times | | Topic: | Inventories | | Status: | Open | |
|
| Hi everyone,
There are two (retired) sets for the Winter Toy Shop set, 10199 and 10249. I
get that one was released in '09 and the other in 2015, and there seems to
be a few bricks more in the second one. But looking at pictures I really can't
seem to pinpoint the differences.
Does anyone know off the top? I just want to know if it's worth the price
difference on the market.
Thanks!
|
| Author: | mwright5 | | Posted: | Nov 11, 2018 18:36 | | Subject: | Metalbeard Parts list | | Viewed: | 93 times | | Topic: | Inventories | | Status: | Open | |
|
| Anyone have a list for Metalbeard? Specifically, the one from Metalbeard's
Seacow.
Thank You
|
| Author: | LordSkylark | | Posted: | Nov 9, 2018 10:54 | | Subject: | Key chain inventorying? | | Viewed: | 55 times | | Topic: | Inventories | | Status: | Open | |
|
| I think I forgot about posting this in my previous list...
What about inventorying key chains and magnets that normally do not come apart?
There are some rare parts that are ONLY included in these and it would be good
to know how to get certain parts.
Andrew
|
|
| Author: | XXXPHOENIX | | Posted: | Nov 8, 2018 18:04 | | Subject: | 1064-1 from 1981 finally inventoried :) | | Viewed: | 85 times | | Topic: | Inventories | | Status: | Open | |
|
| Hello Vintage Lego Collectors!
I have just inventoried the elusive 1064-1 set from 1981
I got this superRARE set from a Swedish guy in 2017.
This Dacta set, according to him, was given for free to pediatric departments.
That's why so few survived.
The set is composed by a box, 6 cardboards instructions, 396 bricks&parts and
6 minifigures
There are 6x different instructions, 1 for each miniset included in the box.
Each instruction is printed on cardboard and also depicts a visual inventory
of each miniset.
I am very proud that now ALL Vintage Dacta Town sets have been inventoried!!!
Federico - ITALY
|
|
| Author: | SylvainLS | | Posted: | Nov 4, 2018 09:42 | | Subject: | Inventories pending approval | | Viewed: | 86 times | | Topic: | Inventories | | Status: | Open | |
|
| Is there a way to see an inventory which is “pending approval” (when you’re not
the submitter)?
Or at least a way to know why it’s pending?
I can’t find either….
|
| Author: | paolocolombo | | Posted: | Nov 4, 2018 03:30 | | Subject: | Set 1636-1 - Small Bucket | | Viewed: | 77 times | | Topic: | Inventories | | Status: | Open | |
|
| An item is missing in the inventory of set 1636-1:
Dark Gray
Part 6007] Human Tool, Brick Separator
Parts: Accessory, Human Tool: 6007
|
|
|
| Author: | Golbsbricks | | Posted: | Nov 1, 2018 12:22 | | Subject: | 32526pb001 Red not an option | | Viewed: | 74 times | | Topic: | Inventories | | Status: | Open | |
|
| Firstly, I have no idea how to properly report this stuff. Any direction on how
to do so would be welcomed as I would like to help with reporting these things
when they come up. anywho...
Price guide only appears for green with option for red, however the red variant
shows as an option in the one set it appears in:
Red variant shown in set inventory that gives price guide AND green variant.
I'm not sure if this is a duplicate page issue or the price doesn't
show for pieces that have no sales, which it should imo, because otherwise at
first glance it looks like the piece does not exist in the catalog.
|
|
| Author: | WhiteVanMan | | Posted: | Oct 31, 2018 15:56 | | Subject: | Set 9395-1 | | Viewed: | 40 times | | Topic: | Inventories | | Status: | Open | |
|
| Hi all.
I'm currently adding counterparts to the catalogue for this set
I didn't have the complete set when it arrived at my home, and upon dismantling
, I found that none of the stickered panels and other parts were not in the catalogue,
and so I've started to add them.
I'm stuck on 1 part.
It's the LBG 1x9 lift arms that have a stickered anti-slip tread pattern.
I can see one in the main image as above, and it seems to be on a WHITE 1x9 lift
arm, (underneath the driver's door) but there are no White 1x9 arms listed
within the set's inventory.
Can anyone verify whether this is indeed the case?
Also, if anyone has the whole set, can you let me know how many of the stickers
were applied to the appropriate lift arms and what colour they were, as the sticker
sheet is showing 6 of the anti-slip treads, and there are 5 of the LBG lift arms
within the inventory.
Regards,
Paul
|
|
| Author: | _djm | | Posted: | Oct 28, 2018 18:19 | | Subject: | This item has already been reserved by member | | Viewed: | 145 times | | Topic: | Inventories | | Status: | Open | |
|
| I'm trying to add the inventory for I'm trying to do this via
the page https://www.bricklink.com/catalogInvAdd.asp?viewType=G.
When I attempt to reserve it, I get an error message "This item has already been
reserved by member".
However, when I look at the "Items Reserved to be Inventoried" page (https://www.bricklink.com/catalogList.asp?invRes=Y),
it is not list as being reserved.
Given it does not appear to be reserved, can anyone suggest what might be the
issue?
Regards,
David
|
|
| Author: | tonnic | | Posted: | Oct 20, 2018 12:29 | | Subject: | Alternate parts are awful. | | Viewed: | 164 times | | Topic: | Inventories | | Status: | Open | |
|
| I have 2 Lego education sets, 9348 and 9349.
In both sets the males have head 3626bpb0628 (head with black eyebrows) instead
of 3626bpb0121 (head with brown eyebrows).
In both sets the heads are not even with different eyebrows but also with stud
recessed instead of blocked open stud with triangle.
There is a note below the 22 minifigs of set 9348 regarding the two possible
different heads, not with the set 9349.
Also only a note below the list of 22 minifigs, NOT with the individual minifigs.
Eventhough the minifigs of set 9348 have a note regarding the black instead of
brown eyebrows I think this would not be enough, it does not show on a picture
or with the minifig inventory.
So it is very rudimentary in my opinion.
Although I have the minifigs in hands I do not have the possibility anymore to
upload the right minifigs due to the use of an iPad. Bricklink needs a code below
the minifig and parts, this cannot be done with an iPad.
Bricklink cadmin can make a note below set 9349 like with set 9348 but I think
this is not the real Bricklinkway.
If customers do not read the line below the 22 minifigs they might believe they
received the wrong minifig because inventory does not show the alternate head
and because the note regarding the different heads/eyebrows do not show at the
minifigure itself.
What can be done with this isue due to the lack of a laptop/computer?
https://www.bricklink.com/v2/catalog/catalogitem.page?P=3626bpb0121&idColor=3#T=C&C=3
And
https://www.bricklink.com/v2/search.page?q=3626bpb0121#T=A
https://www.bricklink.com/catalogItemInv.asp?S=9348-1&viewItemType=M
and
https://www.bricklink.com/catalogItemInv.asp?S=9349-1&viewItemType=M
|
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|
USA, Massachusetts
)
)
)
)
)
)
)
Switzerland, Vaud
Germany, Bayern
Netherlands, Noord-Brabant
Italy, Emilia-Romagna
United Kingdom, England
Australia, Victoria
Canada, Quebec
France, Nouvelle-Aquitaine
New Zealand, Auckland
