BrickLink Discussion Forum

In Inventories Requests, Hygrotus writes:

In Inventories Requests, normann1974 writes:

Official instructions from lego.com.

We have now after this change 323 parts in inventory. There is a possibility
that we still could have one part too many. Parts count on box 322.

P.S. According to offcial Lego intrnet inventory should be 323 parts https://brickset.com/sets/8283-1/Telehandler,
then we have it correct now.

Also, I can confirm all other counts (including extras) for this.

/Jan

Author:

Hygrotus

Posted:

Dec 13, 2018 13:58

Subject:

Re: Inventory Change Request for Set 8283-1

Viewed:

18 times

Topic:

In Inventories Requests, Hygrotus writes:

In Inventories Requests, normann1974 writes:

Official instructions from lego.com.

We have now after this change 323 parts in inventory. There is a possibility
that we still could have one part too many. Parts count on box 322.

P.S. According to offcial Lego intrnet inventory should be 323 parts https://brickset.com/sets/8283-1/Telehandler,
then we have it correct now.

Author:

Hygrotus

Posted:

Dec 13, 2018 13:53

Subject:

Re: Inventory Change Request for Set 8283-1

Viewed:

19 times

Topic:

In Inventories Requests, normann1974 writes:

Official instructions from lego.com.

We have now after this change 323 parts in inventory. There is a possibility
that we still could have one part too many. Parts count on box 322.

Author:

TakeAbricK

Posted:

Dec 13, 2018 13:19

Subject:

Inventory Change Request for Set 801-2

Viewed:

11 times

Topic:

Status:

Open

Please make changes to the following inventory:

801-2 (Inv) Extra Bricks Blue
62 Parts, 1986
Sets: Universal Building Set: Supplemental

* Add 12 Part 3003old Blue Brick 2 x 2 without Inside Supports (Alternate) (match ID 2)
* Change 12 Part Blue 3003 Brick 2 x 2 {match ID 0 to 2}

Comments from Submitter:
Source: Sealed Set Contents

3001
3002old
3003old

Diana

Author:

mjwest83

Posted:

Dec 13, 2018 13:18

Subject:

Inventory Change Request for Set 71043-1

Viewed:

16 times

Topic:

Status:

Open

Please make changes to the following inventory:

71043-1 (Inv) Hogwarts Castle
5975 Parts, 28 Minifigures, 2018
Sets: Harry Potter: Sculptures

* Add 1 Part spa0029 (Not Applicable) Mini Hungarian Horntail - Set 71043 (Counterpart)
* Add 1 Part spa0030 (Not Applicable) Mini Hagrid's Hut - Set 71043 (Counterpart)
* Add 1 Part spa0031 (Not Applicable) Mini Whomping Willow - Set 71043 (Counterpart)

Author:

FreeStorm

Posted:

Dec 13, 2018 13:02

Subject:

Inventory Change Request for Set 5198-1

Viewed:

14 times

Topic:

Status:

Open

Please make changes to the following inventory:

5198-1 (Inv) Small Plates, Disks and Cones
48 Parts, 1989
Sets: Service Packs

* Delete 4 Part 4073 Trans-Clear Plate, Round 1 x 1 Straight Side
* Add 2 Part 4073c01 Trans-Clear Plate, Round 1 x 1, 2 on Sprue
* Delete 4 Part 4073 Trans-Green Plate, Round 1 x 1 Straight Side
* Add 2 Part 4073c01 Trans-Green Plate, Round 1 x 1, 2 on Sprue
* Delete 4 Part 4073 Trans-Red Plate, Round 1 x 1 Straight Side
* Add 2 Part 4073c01 Trans-Red Plate, Round 1 x 1, 2 on Sprue
* Delete 4 Part 4073 Trans-Yellow Plate, Round 1 x 1 Straight Side
* Add 2 Part 4073c01 Trans-Yellow Plate, Round 1 x 1, 2 on Sprue

Comments from Submitter:
Source:
https://www.toysperiod.com/img/cache/cd/800x600/d4e4o5g414m4r5g5m444a4f446o2o4c4z5o4p59406u203446323y3y2r2x2y2u2b4w2t294v2t2t2n2b4p4o5l2a4u264x3x254p2.jpg

Author:

mjwest83

Posted:

Dec 13, 2018 13:00

Subject:

Inventory Change Request for Set 75953-1

Viewed:

12 times

Topic:

Status:

Open

Please make changes to the following inventory:

75953-1 (Inv) Hogwarts Whomping Willow
729 Parts, 6 Minifigures, 2018
Sets: Harry Potter: Chamber of Secrets

* Add 1 Part spa0027 (Not Applicable) Ford Anglia - Set 75953 (Counterpart)
* Add 1 Part spa0028 (Not Applicable) Whomping Willow - Set 75953 (Counterpart)

Author:

mjwest83

Posted:

Dec 13, 2018 12:59

Subject:

Inventory Change Request for Set 4841-1

Viewed:

12 times

Topic:

Status:

Open

Please make changes to the following inventory:

4841-1 (Inv) Hogwarts Express (3rd edition)
626 Parts, 5 Minifigures, 2010
Sets: Harry Potter

* Add 1 Part spa0026 (Not Applicable) Ford Anglia - Set 4841 (Counterpart)

Author:

mjwest83

Posted:

Dec 13, 2018 12:58

Subject:

Inventory Change Request for Set 75954-1

Viewed:

9 times

Topic:

Status:

Open

Please make changes to the following inventory:

75954-1 (Inv) Hogwarts Great Hall
835 Parts, 10 Minifigures, 2018
Sets: Harry Potter: Sorcerer's Stone

* Add 1 Part basilisk02 (Not Applicable) Basilisk - Set 75954 (Counterpart)
* Add 1 Part fawkes01 (Not Applicable) Fawkes - Set 75954 (Counterpart)

Author:

FreeStorm

Posted:

Dec 13, 2018 12:50

Subject:

Re: Inventory Change Request for Set 8714-1

Viewed:

27 times

Topic:

No, not difficult to implement; just slightly difficult to get the right minifigs
into the catalog quickly. For now, I will add an inventory note to the set stating
that the other two figures should be without helmets, and I will see if I can
get some cheap figures for the fixes.

Cheers,
Randy

Sorry to disturb this post.
but I don't understand something:

On this link (unboxing of 8714) you can see the minifigs are pre-build (or mounted?).
http://www.brickshelf.com/cgi-bin/gallery.cgi?f=268806

The helmets are not on the minifigs.
http://www.brickshelf.com/gallery/Rober-to/Technic/8714/8714b.jpg
http://www.brickshelf.com/gallery/Rober-to/Technic/8714/8714a.jpg

Same for set 8640:
http://www.brickshelf.com/cgi-bin/gallery.cgi?f=285129
or set 8620:
http://www.brickshelf.com/cgi-bin/gallery.cgi?f=490149

Author:

normann1974

Posted:

Dec 13, 2018 12:41

Subject:

Re: Inventory Change Request for Set 8283-1

Viewed:

24 times

Topic:

Official instructions from lego.com.

Author:

normann1974

Posted:

Dec 13, 2018 12:41

Subject:

Inventory Change Request for Set 8283-1

Viewed:

27 times

Topic:

Status:

Open

Please make changes to the following inventory:

8283-1 (Inv) Telehandler (Front End Loader)
323 Parts, 2006
Sets: Technic: Model: Construction

* Change {25 to 23} Part Light Bluish Gray 4265c Technic Bush 1/2 Smooth

Comments from Submitter:
There are only 23 of this part (and two extra) in this set (confirmed in my MISB-based set that was never mixed with other bricks). Please see count in instructions (image will follow).

Author:

TakeAbricK

Posted:

Dec 13, 2018 11:58

Subject:

Inventory Change Request for Set 805-1

Viewed:

23 times

Topic:

Status:

Open

Please make changes to the following inventory:

805-1 (Inv) Extra Bricks Gray
62 Parts, 1986
Sets: Universal Building Set: Supplemental

* Add 12 Part 3003old Light Gray Brick 2 x 2 without Inside Supports (Alternate) (match ID 2)
* Change 12 Part Light Gray 3003 Brick 2 x 2 {match ID 0 to 2}

Comments from Submitter:
Source: Sealed Set Contents

3001
3002old
3003old

Diana

Author:

therobo

Posted:

Dec 13, 2018 11:56

Subject:

Re: Inventory Change Request for Minifig sw534

Viewed:

27 times

Topic:

In Inventories Requests, Hygrotus writes:

In Inventories Requests, therobo writes:

In Inventories Requests, Hygrotus writes:

In Inventories Requests, samsam2 writes:

Please make changes to the following inventory: [M=sw534]

* Change 1 Part Red {553pb016 Brick, Round 2 x 2 Dome Top with Silver Pattern (R4-P17 / Astromech Droid)) to 553pb023 Brick, Round 2 x 2 Dome Top with Silver Band around Dome Pattern (R4-P17)}

Comments from Submitter:
dome top is with silver band version. Existing image of 553pb016 (should not have silver band) in red shows the silver band. Silver band version is part 553pb023

Sorry for long waiting, but I wanted to study this problem, which looked like
easy one on the first sight.
Good catch, I didn't notice it when I was submiting new replacment image
for red

553pb016 Brick, Round 2 x 2 Dome Top with Silver Pattern (R4-P17)
Parts: Brick, Round, Decorated

I didn't do inventory for [m=sw534], so somebody else used part 553pb016
in its inventory submission and then I submited only new image to replace one
being for this part in red color submited before by inventory submitter of this
minifg and didn't compare them in that time (as I remember it was 2014

).

I created 553pb016 and 553pb023 for different astomechs which I inventoried:
[m=sw456] and [m=sw706]

So you excellently noticed that dome for sw534 has silver stripe, I appreciate
this.
I this post I attached comparison images of all three astromech.

But I think we should create completely new unique dome for this particualr droid.
Why? Look at the droid indicator on dome in sw534 is lime but in sw706 having
part 553pb023 is blue

This is difference in pattern printing recognized in similar parts in catalog:

553pb017a Brick, Round 2 x 2 Dome Top with Red Dots, Small Receptor and Dark Blue Pattern (R2-D2)
Parts: Brick, Round, Decorated

553pb017b Brick, Round 2 x 2 Dome Top with Lavender Dots, Small Receptor and Dark Blue Pattern (R2-D2)
Parts: Brick, Round, Decorated

So summarizing
- photo of dome for sw534 is correct
- dome for sw534 is classified under wrong entry
- sw534 has unique pattern printing which should have own catalog entry.

Here it is:

553pb034 Brick, Round 2 x 2 Dome Top with Silver Band Around Dome, Lime Dot Pattern (Astromech Droid)
Parts: Brick, Round, Decorated

I changed now inventory sw534 no longer has 553pb016, can be Xref moved from
red 553pb016 to this new one?

Author:

axaday

Posted:

Dec 13, 2018 11:56

Subject:

Re: Inventory Change Request for Set 8714-1

Viewed:

21 times

Topic:

In Inventories Requests, randyf writes:

In Inventories Requests, axaday writes:

In Inventories Requests, Hygrotus writes:

In Inventories Requests, randyf writes:

In Inventories Requests, axaday writes:

Please make changes to the following inventory:

8714-1 (Inv) The LEGO TECHNIC Team
3 Minifigures, 1993
Sets: Technic: Supplemental

Since this set does not have instructions, we must look to the box to show us
what the figure should be inventoried as. Unfortunately, the box is also inconclusive
in this case as it shows the figure without the helmet on the front of the box
and with the helmet on the back of the box.

This is a tough call. I would like them to all be consistent in this set, so
let's look a little further.

There are nine complete figures in total shown on the box (three with the black
arms, three with the blue arms, and three with the red arms). Of those nine,
only three of them are shown with the helmets (one with the black arms and two
with the red arms). Therefore, the blue-armed figure should definitely not have
a helmet. (Helmets: 0; No Helmets: 1)

That leaves the black-armed figure and the red-armed figure. The black-armed
figure has two images without helmet and one with helmet. Looking at the score
shows that the black-armed figure should also not have a helmet. (Helmets: 0;
No Helmets: 2)

Finally, the red-armed figure has two images with helmet and one without helmet.
Looking at the score for this one shows that the red-armed figure should have
a helmet. (Helmets: 1, No Helmets: 2)

Since the "No Helmets" win by one point, my decision is to go with all figures
in the set with no helmets for consistency.

What do you think, Marek?

Cheers,
Randy

Agree to this

It will be difficult to implement.

I've been looking around too.

Author:

randyf

Posted:

Dec 13, 2018 11:45

Subject:

Re: Please approve LEGO Movie 2 30620 Polybag

Viewed:

38 times

Topic:

In Catalog, rapar writes:

Hello,

Can you please approve The Lego Movie 2: 30620 Star-Stuck Emmet Polybag? I have
some in my hands. This polybag can already be purchased in Poland.

If you need more information please let me know.

Thank you!

Nice polybag! It depicts a great little scene from the movie, and I love the
sand green tiles! I have a feeling this polybag will not get released over here
in the States.

Cheers,
Randy

Author:

randyf

Posted:

Dec 13, 2018 11:34

Subject:

Re: Inventory Change Request for Set 8714-1

Viewed:

22 times

Topic:

In Inventories Requests, axaday writes:

In Inventories Requests, Hygrotus writes:

In Inventories Requests, randyf writes:

In Inventories Requests, axaday writes:

Please make changes to the following inventory:

8714-1 (Inv) The LEGO TECHNIC Team
3 Minifigures, 1993
Sets: Technic: Supplemental

Agree to this

It will be difficult to implement.

Author:

Hygrotus

Posted:

Dec 13, 2018 11:19

Subject:

Re: Inventory Change Request for Minifig sw534

Viewed:

11 times

Topic:

In Inventories Requests, therobo writes:

In Inventories Requests, Hygrotus writes:

In Inventories Requests, samsam2 writes:

Sorry for long waiting, but I wanted to study this problem, which looked like
easy one on the first sight.
Good catch, I didn't notice it when I was submiting new replacment image
for red

553pb016 Brick, Round 2 x 2 Dome Top with Silver Pattern (R4-P17)
Parts: Brick, Round, Decorated

).

I created 553pb016 and 553pb023 for different astomechs which I inventoried:
[m=sw456] and [m=sw706]

This is difference in pattern printing recognized in similar parts in catalog:

553pb017a Brick, Round 2 x 2 Dome Top with Red Dots, Small Receptor and Dark Blue Pattern (R2-D2)
Parts: Brick, Round, Decorated

553pb017b Brick, Round 2 x 2 Dome Top with Lavender Dots, Small Receptor and Dark Blue Pattern (R2-D2)
Parts: Brick, Round, Decorated

So summarizing
- photo of dome for sw534 is correct
- dome for sw534 is classified under wrong entry
- sw534 has unique pattern printing which should have own catalog entry.

Here it is:

553pb034 Brick, Round 2 x 2 Dome Top with Silver Band Around Dome, Lime Dot Pattern (Astromech Droid)
Parts: Brick, Round, Decorated

I changed now inventory sw534 no longer has 553pb016, can be Xref moved from
red 553pb016 to this new one?

Author:

Hygrotus

Posted:

Dec 13, 2018 11:11

Subject:

Re: Inventory Change Request for Minifig sw534

Viewed:

16 times

Topic:

In Inventories Requests, samsam2 writes:

Everything now was sorted and corrected
https://www.bricklink.com/message.asp?ID=1119541
as this droid can't have 553pb023 in the inventory but completly new dome
was created 553pb034 for it I have to reject your request. But thank you for
finding this mistake and notifying us.

Author:

Hygrotus

Posted:

Dec 13, 2018 11:03

Subject:

Inventory Change Request for Minifig sw534

Viewed:

32 times

Topic:

Status:

Open

Please make changes to the following inventory: [M=sw534]

* Change 1 Part Red {553pb016 Brick, Round 2 x 2 Dome Top with Silver Pattern (R4-P17 / Astromech Droid)) to 553pb034 Brick, Round 2 x 2 Dome Top with Silver Band around Dome, Lime Dot Pattern (Astromech Droid)}

Comments from Submitter:
This droid has unique dome printig, new entry was crated for it.
https://www.bricklink.com/message.asp?ID=1119518

Author:

Hygrotus

Posted:

Dec 13, 2018 11:00

Subject:

Re: Inventory Change Request for Minifig sw534

Viewed:

18 times

Topic:

In Inventories Requests, therobo writes:

In Inventories Requests, Hygrotus writes:

In Inventories Requests, samsam2 writes:

Sorry for long waiting, but I wanted to study this problem, which looked like
easy one on the first sight.
Good catch, I didn't notice it when I was submiting new replacment image
for red

553pb016 Brick, Round 2 x 2 Dome Top with Silver Pattern (R4-P17)
Parts: Brick, Round, Decorated

).

I created 553pb016 and 553pb023 for different astomechs which I inventoried:
[m=sw456] and [m=sw706]

This is difference in pattern printing recognized in similar parts in catalog:

553pb017a Brick, Round 2 x 2 Dome Top with Red Dots, Small Receptor and Dark Blue Pattern (R2-D2)
Parts: Brick, Round, Decorated

553pb017b Brick, Round 2 x 2 Dome Top with Lavender Dots, Small Receptor and Dark Blue Pattern (R2-D2)
Parts: Brick, Round, Decorated

So summarizing
- photo of dome for sw534 is correct
- dome for sw534 is classified under wrong entry
- sw534 has unique pattern printing which should have own catalog entry.

Here it is:

553pb034 Brick, Round 2 x 2 Dome Top with Silver Band Around Dome, Lime Dot Pattern (Astromech Droid)
Parts: Brick, Round, Decorated

Thanks

Author:

therobo

Posted:

Dec 13, 2018 10:57

Subject:

Re: Inventory Change Request for Minifig sw534

Viewed:

30 times

Topic:

In Inventories Requests, Hygrotus writes:

In Inventories Requests, samsam2 writes:

Sorry for long waiting, but I wanted to study this problem, which looked like
easy one on the first sight.
Good catch, I didn't notice it when I was submiting new replacment image
for red

553pb016 Brick, Round 2 x 2 Dome Top with Silver Pattern (R4-P17)
Parts: Brick, Round, Decorated

).

I created 553pb016 and 553pb023 for different astomechs which I inventoried:
[m=sw456] and [m=sw706]

This is difference in pattern printing recognized in similar parts in catalog:

553pb017a Brick, Round 2 x 2 Dome Top with Red Dots, Small Receptor and Dark Blue Pattern (R2-D2)
Parts: Brick, Round, Decorated

553pb017b Brick, Round 2 x 2 Dome Top with Lavender Dots, Small Receptor and Dark Blue Pattern (R2-D2)
Parts: Brick, Round, Decorated

So summarizing
- photo of dome for sw534 is correct
- dome for sw534 is classified under wrong entry
- sw534 has unique pattern printing which should have own catalog entry.

Here it is:

553pb034 Brick, Round 2 x 2 Dome Top with Silver Band Around Dome, Lime Dot Pattern (Astromech Droid)
Parts: Brick, Round, Decorated

I will correct then everything, thank you once again for finding this

Cheers
Marek

Author:

Hygrotus

Posted:

Dec 13, 2018 08:04

Subject:

Re: Inventory Change Request for Set 10194-1

Viewed:

20 times

Topic:

In Inventories Requests, Hygrotus writes:

In Inventories Requests, Teutsch writes:

Please make changes to the following inventory:

10194-1 (Inv) Emerald Night
1072 Parts, 3 Minifigures, 2009
Sets: Train: RC Train

* Add 1 Part 44375b Black Dish 6 x 6 Inverted (Radar) - Solid Studs (match ID 2)

Comments from Submitter:
I built my Emerald Night a month ago, MISB Set which I bought myself from Lego-Online-Store several years ago in Germany. The Set contains definately another version - my black dish has not any hollow studs, it has solid studs, so there is an alternate version of this set! If needed, I can send pictures of the LOT, Train itself, seals on packaging to locate the lego-factory my set got produced.

Please attach then pictures of your finding.
The only one which I fould with solid stud on this part is in this review:
https://youtu.be/b02yVGIH2xM?t=352
made by Australian Lego Fan, his speed build were always very good and usful
for checking variants he do them mostly from sealed set content (I trust his
reviews), but unluckily this one is older one from him so there isn't showed
box unpacking and bags unpacking

P.S.
I want to be here very carful for this variant here because when I was looking
for some more proofs I found many builds of lepin counterfeit showed on youtube
and in them this dish is with soild studs

Author:

Hygrotus

Posted:

Dec 13, 2018 08:03

Subject:

Re: Inventory Change Request for Set 10194-1

Viewed:

20 times

Topic:

In Inventories Requests, Teutsch writes:

Please make changes to the following inventory:

10194-1 (Inv) Emerald Night
1072 Parts, 3 Minifigures, 2009
Sets: Train: RC Train

Author:

Hygrotus

Posted:

Dec 13, 2018 07:48

Subject:

Re: Inventory Change Request for Minifig sw534

Viewed:

35 times

Topic:

In Inventories Requests, samsam2 writes:

Sorry for long waiting, but I wanted to study this problem, which looked like
easy one on the first sight.
Good catch, I didn't notice it when I was submiting new replacment image
for red

553pb016 Brick, Round 2 x 2 Dome Top with Silver Pattern (R4-P17)
Parts: Brick, Round, Decorated

).

I created 553pb016 and 553pb023 for different astomechs which I inventoried:
[m=sw456] and [m=sw706]

This is difference in pattern printing recognized in similar parts in catalog:

553pb017a Brick, Round 2 x 2 Dome Top with Red Dots, Small Receptor and Dark Blue Pattern (R2-D2)
Parts: Brick, Round, Decorated

553pb017b Brick, Round 2 x 2 Dome Top with Lavender Dots, Small Receptor and Dark Blue Pattern (R2-D2)
Parts: Brick, Round, Decorated

So summarizing
- photo of dome for sw534 is correct
- dome for sw534 is classified under wrong entry
- sw534 has unique pattern printing which should have own catalog entry.

I will correct then everything, thank you once again for finding this

Cheers
Marek

Author:

axaday

Posted:

Dec 13, 2018 07:27

Subject:

Re: Inventory Change Request for Set 8714-1

Viewed:

18 times

Topic:

In Inventories Requests, Hygrotus writes:

In Inventories Requests, randyf writes:

In Inventories Requests, axaday writes:

Please make changes to the following inventory:

8714-1 (Inv) The LEGO TECHNIC Team
3 Minifigures, 1993
Sets: Technic: Supplemental

Agree to this

It will be difficult to implement.

Author:

Hygrotus

Posted:

Dec 13, 2018 06:23

Subject:

Re: Inventory Change Request for Set 8714-1

Viewed:

20 times

Topic:

In Inventories Requests, randyf writes:

In Inventories Requests, axaday writes:

Please make changes to the following inventory:

8714-1 (Inv) The LEGO TECHNIC Team
3 Minifigures, 1993
Sets: Technic: Supplemental

Agree to this

Author:

yorbrick

Posted:

Dec 13, 2018 05:46

Subject:

Re: Please approve LEGO Movie 2 30620 Polybag

Viewed:

33 times

Topic:

In Catalog, rapar writes:

Nice. The NK shield in sand green.

Author:

rapar

Posted:

Dec 13, 2018 04:50

Subject:

Re: Please approve LEGO Movie 2 30620 Polybag

Viewed:

37 times

Topic:

Thank you, I appreciate it!

In Catalog, StormChaser writes:

In Catalog, rapar writes:

Can you please approve The Lego Movie 2: 30620 Star-Stuck Emmet Polybag? I have
some in my hands. This polybag can already be purchased in Poland.

For you I will, but only just this once.

30620-1 (Inv) Star-Stuck Emmet polybag
37 Parts, 1 Minifigure, 2019
Sets: The LEGO Movie 2

Author:

StormChaser

Posted:

Dec 13, 2018 04:41

Subject:

Re: Please approve LEGO Movie 2 30620 Polybag

Viewed:

41 times

Topic:

In Catalog, rapar writes:

Can you please approve The Lego Movie 2: 30620 Star-Stuck Emmet Polybag? I have
some in my hands. This polybag can already be purchased in Poland.

For you I will, but only just this once.

30620-1 (Inv) Star-Stuck Emmet polybag
37 Parts, 1 Minifigure, 2019
Sets: The LEGO Movie 2

Author:

rapar

Posted:

Dec 13, 2018 04:21

Subject:

Please approve LEGO Movie 2 30620 Polybag

Viewed:

248 times

Topic:

Status:

Open

Author:

FreeStorm

Posted:

Dec 13, 2018 03:33

Subject:

Re: Inventory Change Request for Set 8714-1

Viewed:

21 times

Topic:

In Inventories Requests, randyf writes:

In Inventories Requests, axaday writes:

Please make changes to the following inventory:

8714-1 (Inv) The LEGO TECHNIC Team
3 Minifigures, 1993
Sets: Technic: Supplemental

Hello,

Maybe this link can Help:
http://www.brickshelf.com/gallery/Rober-to/Technic/8714/8714a.jpg

You can see the helmets into sealed bag on the background.

Author:

randyf

Posted:

Dec 13, 2018 02:22

Subject:

Re: Inventory Change Request for Set 8272-1

Viewed:

17 times

Topic:

In Inventories Requests, normann1974 writes:

As previously discussed for another set, it's my belief that the 2L hoses are PLG, not
flat silver. They seem to have the same color as the bionicle teeth which are PLG in
this set. But a change of this is likely to be rejected, I'll not do it here but only
leave my thoughts on it.

Why would you say it would be rejected? I would be more than happy to look into
this before making any determination.

Could you post a picture of the hoses from this set next to the Bionicle teeth
from this set? I may not be considered one of the resident color experts, but
I do know my LEGO colors quite well. In the meantime, I will search the intertubes
for other data points.

Cheers,
Randy

Author:

randyf

Posted:

Dec 13, 2018 01:11

Subject:

Re: Inventory Change Request for Set 8714-1

Viewed:

27 times

Topic:

In Inventories Requests, axaday writes:

Please make changes to the following inventory:

8714-1 (Inv) The LEGO TECHNIC Team
3 Minifigures, 1993
Sets: Technic: Supplemental

Author:

axaday

Posted:

Dec 12, 2018 21:34

Subject:

Inventory Change Request for Set 8225-1

Viewed:

11 times

Topic:

Status:

Open

Please make changes to the following inventory:

8225-1 (Inv) Road Rally V
94 Parts, 1 Minifigure, 1995
Sets: Technic: Model: Race

Author:

axaday

Posted:

Dec 12, 2018 21:32

Subject:

Inventory Change Request for Set 8244-1

Viewed:

13 times

Topic:

Status:

Open

Please make changes to the following inventory:

8244-1 (Inv) Convertibles
273 Parts, 1 Minifigure, 1996
Sets: Technic: Universal Building Set

* Delete 1 Part 2715 Black Technic, Figure Accessory Helmet
* Delete 1 Part 2716 Trans-Clear Technic, Figure Accessory Helmet Visor
* Change 1 Minifig {tech012 Technic Figure Black Legs, Light Gray Top with 2 Brown Belts, Black Arms to tech030 Technic Figure Black Legs, Light Gray Top with 2 Brown Belts, Black Arms, Black Helmet}

Comments from Submitter:
http://lego.brickinstructions.com/lego_instructions/set/8244/Transformer_Set I don't actually see a page where they say to get him out and put him together. He's just pictured in the driver's seat with his helmet on.

Author:

axaday

Posted:

Dec 12, 2018 21:27

Subject:

Inventory Change Request for Set 8714-1

Viewed:

21 times

Topic:

Status:

Open

Please make changes to the following inventory:

8714-1 (Inv) The LEGO TECHNIC Team
3 Minifigures, 1993
Sets: Technic: Supplemental

Author:

SezaR

Posted:

Dec 12, 2018 21:25

Subject:

Re: Inventory Change Request for Set 6622-1

Viewed:

14 times

Topic:

In Inventories Requests, SezaR writes:

Please make changes to the following inventory:

6622-1 (Inv) Mailman on Motorcycle
16 Parts, 2 Minifigures, 1984
Sets: Town: Classic Town: Post Office

* Delete 1 Part 4073 Trans-Yellow Plate, Round 1 x 1 Straight Side
* Add 1 Part 4073c01 Trans-Yellow Plate, Round 1 x 1, 2 on Sprue

Comments from Submitter:
MISB from personal collection. Photos will be added soon.

Author:

axaday

Posted:

Dec 12, 2018 21:23

Subject:

Inventory Change Request for Set 8229-1

Viewed:

12 times

Topic:

Status:

Open

Please make changes to the following inventory:

8229-1 (Inv) Tread Trekker
183 Parts, 1 Minifigure, 1997
Sets: Technic: Model: Off-Road

Author:

Brixalotl

Posted:

Dec 12, 2018 20:36

Subject:

Inventory Change Request for Set 76021-1

Viewed:

20 times

Topic:

Status:

Open

Please make changes to the following inventory:

76021-1 (Inv) The Milano Spaceship Rescue
643 Parts, 5 Minifigures, 1 Book, 2014
Sets: Super Heroes: Guardians of the Galaxy

* Delete 2 Part 44302 Light Bluish Gray Hinge Plate 1 x 2 Locking with 2 Fingers on End (Undetermined Type)
* Add 2 Part 44302a Light Bluish Gray Hinge Plate 1 x 2 Locking with 2 Fingers on End with Bottom Groove (match ID 1)
* Add 2 Part 44302b Light Bluish Gray Hinge Plate 1 x 2 Locking with 2 Fingers on End without Bottom Groove (Alternate) (match ID 1)
* Add 2 Part 21459 Flat Silver Minifigure, Weapon Sword, Shamshir/Katana (Square Guard) with Capped Pommel and Holes in Crossguard and Blade (Alternate) (match ID 2)
* Add 1 Part 14769 Lime Tile, Round 2 x 2 with Bottom Stud Holder (Alternate) (match ID 3)
* Change 2 Part Flat Silver 30173b Minifigure, Weapon Sword, Shamshir/Katana (Square Guard) with Uncapped Pommel and Hole in Hilt {match ID 0 to 2}
* Change 1 Part Lime 4150 Tile, Round 2 x 2 {match ID 0 to 3}

Comments from Submitter:
confirmed during part-out, thanks

Author:

normann1974

Posted:

Dec 12, 2018 18:32

Subject:

Inventory Change Request for Set 8272-1

Viewed:

24 times

Topic:

Status:

Open

Please make changes to the following inventory:

8272-1 (Inv) Snowmobile
331 Parts, 2007
Sets: Technic: Model: Off-Road

* Add 2 Part 78c07 Red Hose, Ribbed 7mm D. 7L (Counterpart)
* Change 2 Part Dark Bluish Gray {2739 Technic, Link 1 x 6 - (MARKED FOR DELETION - Undetermined Inner Ring Ends Version) to 2739b Technic, Link 1 x 6 with Stoppers}

Comments from Submitter:
Source: MISB-based set that was never mixed with other bricks. My set has link with stoppers. I'm also adding two counterparts, because the instructions instructs the user to cut the hose in two halves (page 63). I'm not sure if this is the correct way to do it on BrickLink, but any used set would most likely never include a 14L hose, but two 7L hoses. As previously discussed for another set, it's my belief that the 2L hoses are PLG, not flat silver. They seem to have the same color as the bionicle teeth which are PLG in this set. But a change of this is likely to be rejected, I'll not do it here but only leave my thoughts on it.

Author:

Hygrotus

Posted:

Dec 12, 2018 18:16

Subject:

Re: Inventory Change Request for Set 8641-1

Viewed:

17 times

Topic:

In Inventories Requests, Flyingmic writes:

Please make changes to the following inventory:

8641-1 (Inv) Flame Glider
54 Parts, 2005
Sets: Racers: Tiny Turbos

* Add 1 Part 6091 Orange Brick, Modified 1 x 2 x 1 1/3 with Curved Top (Counterpart)

Comments from Submitter:
The second sticker with the number 2 as seen on the sticker sheet goes on one of the orange parts (nr. 6091) in the set.

You can't add plain part as a replacment for stickered part which is missing
in counterpart section. This request will be rejected. Please first add this
part with sticker applied to the catalog with photos https://www.bricklink.com/wantedCatalog.asp?catType=P,
then fill Inventory Change Request and add them after they are approved.
Adding parts https://www.bricklink.com/help.asp?helpID=71
Adding photos https://www.bricklink.com/help.asp?helpID=87

This thread also can help you
https://www.bricklink.com/message.asp?ID=1085264

Author:

Flyingmic

Posted:

Dec 12, 2018 18:12

Subject:

Inventory Change Request for Set 8641-1

Viewed:

17 times

Topic:

Status:

Open

Please make changes to the following inventory:

8641-1 (Inv) Flame Glider
54 Parts, 2005
Sets: Racers: Tiny Turbos

Author:

SezaR

Posted:

Dec 12, 2018 16:41

Subject:

Inventory Change Request for Set 6622-1

Viewed:

18 times

Topic:

Status:

Open

Please make changes to the following inventory:

6622-1 (Inv) Mailman on Motorcycle
16 Parts, 2 Minifigures, 1984
Sets: Town: Classic Town: Post Office

Author:

samsam2

Posted:

Dec 12, 2018 16:41

Subject:

Same Microfigure Ramses and Orient Bazaar

Viewed:

54 times

Topic:

Status:

Open

These two microfigures look very similar,

Minifig No: 85863pb033 Name: Microfigure Orient Bazaar Merchant Orange (4594142)

85863pb033 Microfigure Orient Bazaar Merchant Orange (4594142)
Minifigures: Games

Minifig No: 85863pb008 Name: Microfigure Ramses Pyramid Adventurer Orange (4560461)

85863pb008 Microfigure Ramses Pyramid Adventurer Orange (4560461)
Minifigures: Games

it took me forever to see the difference, one with belt and one without belt.
Does it make sense to mention belt/no belt in their names?

Author:

Teutsch

Posted:

Dec 12, 2018 16:27

Subject:

Inventory Change Request for Set 10194-1

Viewed:

23 times

Topic:

Status:

Open

Please make changes to the following inventory:

10194-1 (Inv) Emerald Night
1072 Parts, 3 Minifigures, 2009
Sets: Train: RC Train

Author:

randyf

Posted:

Dec 12, 2018 13:49

Subject:

Re: Inventory Change Request for Set 2000409-2

Viewed:

12 times

Topic:

In Inventories Requests, Roloff writes:

Please make changes to the following inventory:

2000409-2 (Inv) Serious Play Window Exploration Bag
49 Parts, 2010
Sets: Educational & Dacta: SERIOUS PLAY

* Add 2 Part 3010 Dark Pink Brick 1 x 4

Comments from Submitter:
Newer sets have these bricks added in the inventory

Do you have the newer version in your possession? If so, I would like to ask
you a few questions.

Thanks,
Randy

Author:

randyf

Posted:

Dec 12, 2018 13:24

Subject:

Re: Inventory Change Request for Set 5042-1

Viewed:

19 times

Topic:

In Inventories Requests, FreeStorm writes:

Please make changes to the following inventory:

5042-1 (Inv) Space Light and Radar Plates, Disks, Cones
50 Parts, 1991
Sets: Service Packs: Space

* Delete 4 Part 4073 Trans-Clear Plate, Round 1 x 1 Straight Side
* Add 2 Part 4073c01 Trans-Clear Plate, Round 1 x 1, 2 on Sprue
* Delete 4 Part 4073 Trans-Green Plate, Round 1 x 1 Straight Side
* Add 2 Part 4073c01 Trans-Green Plate, Round 1 x 1, 2 on Sprue
* Delete 4 Part 4073 Trans-Neon Green Plate, Round 1 x 1 Straight Side
* Add 2 Part 4073c01 Trans-Neon Green Plate, Round 1 x 1, 2 on Sprue
* Delete 4 Part 4073 Trans-Red Plate, Round 1 x 1 Straight Side
* Add 2 Part 4073c01 Trans-Red Plate, Round 1 x 1, 2 on Sprue
* Delete 4 Part 4073 Trans-Yellow Plate, Round 1 x 1 Straight Side
* Add 2 Part 4073c01 Trans-Yellow Plate, Round 1 x 1, 2 on Sprue

Comments from Submitter:
Source:
https://www.bricklink.com/SL/5042-1.jpg?0
http://www.brickshelf.com/gallery/Rober-to/ServicePack/5042.jpg

Image added for future reference in case hyperlink becomes unusable.

Author:

FreeStorm

Posted:

Dec 12, 2018 13:14

Subject:

Inventory Change Request for Set 5042-1

Viewed:

19 times

Topic:

Status:

Open

Please make changes to the following inventory:

5042-1 (Inv) Space Light and Radar Plates, Disks, Cones
50 Parts, 1991
Sets: Service Packs: Space

* Delete 4 Part 4073 Trans-Clear Plate, Round 1 x 1 Straight Side
* Add 2 Part 4073c01 Trans-Clear Plate, Round 1 x 1, 2 on Sprue
* Delete 4 Part 4073 Trans-Green Plate, Round 1 x 1 Straight Side
* Add 2 Part 4073c01 Trans-Green Plate, Round 1 x 1, 2 on Sprue
* Delete 4 Part 4073 Trans-Neon Green Plate, Round 1 x 1 Straight Side
* Add 2 Part 4073c01 Trans-Neon Green Plate, Round 1 x 1, 2 on Sprue
* Delete 4 Part 4073 Trans-Red Plate, Round 1 x 1 Straight Side
* Add 2 Part 4073c01 Trans-Red Plate, Round 1 x 1, 2 on Sprue
* Delete 4 Part 4073 Trans-Yellow Plate, Round 1 x 1 Straight Side
* Add 2 Part 4073c01 Trans-Yellow Plate, Round 1 x 1, 2 on Sprue

Comments from Submitter:
Source:
https://www.bricklink.com/SL/5042-1.jpg?0
http://www.brickshelf.com/gallery/Rober-to/ServicePack/5042.jpg

Author:

Hygrotus

Posted:

Dec 12, 2018 10:44

Subject:

Re: Inventory Change Request for Set 8067-1

Viewed:

19 times

Topic:

In Inventories Requests, randyf writes:

In Inventories Requests, Hygrotus writes:

In Inventories Requests, normann1974 writes:

Please make changes to the following inventory:

8067-1 (Inv) Mini Mobile Crane
292 Parts, 2011
Sets: Technic: Model: Construction

* Add 1 Part x77ac100 Black String, Cord Thin 100cm (Alternate) (match ID 1)
* Change 1 Part Black x77ac50 String, Cord Thin 50cm {match ID 0 to 1}

Comments from Submitter:
Source: MISB-based set that were never mixed with other bricks. My set's string is 1 meter long.

Here in this video I found confirmation to your request:
https://www.youtube.com/watch?v=vajYNEQ0k28
Sealed set content, opened in front of the camera. Parts visible and string is
still in the cardboard and on the cardboard is stated 1.0 M so it is one meter
long.

I'm thinking now is this 50 cm string correct for this set? Intuition tells
me that is too short for this crane, seeing in speed build video it construction.
https://www.youtube.com/watch?v=EnSbQr0G2t4
Arm of the crane extends and when extended and being in the highest point I think
it is needed longer string to hook be able to reach bottom.
I do not own this set so I do not know how big it is in reality.

One more think this set inventory was made from parts list. On parts list both
instruction and LEGO internet parts list we have this string with PCC:
4297719
when you type it here we have 3 strings with the same PCC:

x77ac50 String, Cord Thin 50cm
Parts: String & Net

x77ac100 String, Cord Thin 100cm
Parts: String & Net

x77ac420 String, Cord Thin 420cm
Parts: String & Net

so three of totaly different lenght

quite diffrent like 50 cm and 420 cm

this probably confuse submiters.
Inventory was confirmed also from parts list.
So in my opinion 50cm string should be deleted from inventory and replaced by
100cm string which is confirmed from sealed copy of set from video and your request
also from selaed set.

BTW Lego description
https://brickset.com/parts/4297719/string-poly-0-5mm-on-spool
"String Poly 0,5Mm On Spool" - I think could confuse here also, because of "Mm"
and at first sight you see 0,5M but there is second m, so it is 0,5mm. Then it
not states lenght but thickness 0,5mm. And when you look at the list here https://brickset.com/sets/containing-part-4297719
there are set which we have inventoried with 50cm or 100cm or 420cm

Marek -

You came to the same conclusions that I did when I started researching this last
night. I had a strong feeling that the set always came with the 100cm string.
I agree that this request should be accepted. I will let you do the honors since
you took the time to write all of this out.

Cheers,
Randy

Thanks

Great we agree

So this request will be of course approved, string 50cm will be removed from
this inventory.

Author:

randyf

Posted:

Dec 12, 2018 10:21

Subject:

Re: Inventory Change Request for Set 8067-1

Viewed:

21 times

Topic:

In Inventories Requests, Hygrotus writes:

In Inventories Requests, normann1974 writes:

Please make changes to the following inventory:

8067-1 (Inv) Mini Mobile Crane
292 Parts, 2011
Sets: Technic: Model: Construction

x77ac50 String, Cord Thin 50cm
Parts: String & Net

x77ac100 String, Cord Thin 100cm
Parts: String & Net

x77ac420 String, Cord Thin 420cm
Parts: String & Net

so three of totaly different lenght

quite diffrent like 50 cm and 420 cm

Cheers,
Randy

Author:

Bond

Posted:

Dec 12, 2018 10:18

Subject:

Re: Space helmetsSpace 2nd post

Viewed:

35 times

Topic:

In Catalog, ANFRICKE20 writes:

My question is how would I put it in my store on bricklink. Thanks adam

Hi Adam,

My counsel would be to add the part to your store inventory as follows:

1. Click "My Store Add Item".
2. Category is "Minifigure, Headgear".
3. I'm unsure if your helmet has "Thin" or "Thick" chinstrap. Refer to the
attached image from the BrickLink catalog; you should be able to determine chinstrap
type from this:

- If it is "Thin", then your helmet is likely 193a2 (Minifigure, Helmet Old
with Thin Chinstrap - with Visor Dimples) or

193a2 Minifigure, Headgear Helmet Space / Town with Thin Chin Strap - with Visor Dimples
Parts: Minifigure, Headgear

- If it is "Thick", then your helmet is likely 193b2 (Minifigure, Helmet Old
with Thick Chinstrap - with Visor Dimples) or

193b2 Minifigure, Headgear Helmet Space / Town with Thick Chin Strap - with Visor Dimples
Parts: Minifigure, Headgear

- Another way you could list it is as 193au, which simply indicates that the
presence of visor dimples is undetermined. Many of the "undetermined" catalog
entries are marked for deletion, but this one isn't (for the time being

193au Minifigure, Headgear Helmet Space / Town with Thin Chin Strap (Undetermined Type)
Parts: Minifigure, Headgear

4. Under Comments is where you would tell potential buyers about any anomalies
regarding this item; in this instance (for example): - Note: Helmet only has
dimple on left side.

5. Complete the rest of the required criteria (Quantity, Price Each, etc.)

6. Click "Review Item"; edit if necessary or "Add to Inventory".

Hope that this helps you.

- Bond

Author:

Roloff

Posted:

Dec 12, 2018 07:26

Subject:

Inventory Change Request for Set 2000409-2

Viewed:

25 times

Topic:

Status:

Open

Please make changes to the following inventory:

2000409-2 (Inv) Serious Play Window Exploration Bag
49 Parts, 2010
Sets: Educational & Dacta: SERIOUS PLAY

* Add 2 Part 3010 Dark Pink Brick 1 x 4

Comments from Submitter:
Newer sets have these bricks added in the inventory

Author:

Cmplopes

Posted:

Dec 12, 2018 04:12

Subject:

Inventory Change Request for Set 995-1

Viewed:

26 times

Topic:

Status:

Open

Please make changes to the following inventory:

995-1 (Inv) Lighting Bricks with Color Filters
15 Parts, 1969
Sets: Classic: Supplemental

* Add 1 Part 3066px10 Trans-Clear Brick 1 x 4 without Bottom Tubes with White LEGO Logo on Red Pattern (Alternate) (match ID 313441 )

Comments from Submitter:
You can find sets with this alternate piece

Author:

Hygrotus

Posted:

Dec 12, 2018 02:50

Subject:

Re: Inventory Change Request for Set 2818-1

Viewed:

19 times

Topic:

In Inventories Requests, hobbyist69 writes:

Please make changes to the following inventory:

2818-1 (Inv) Me and My House
65 Parts, 4 Minifigures, 1998
Sets: DUPLO: Playhouse

* Add 1 Part sleepbag06 White Duplo Cloth Sleeping Bag with Pink and Blue Bunny Pattern (Alternate) (match ID 1)
* Change 1 Part White sleepbag07 Duplo Cloth Sleeping Bag with Blue, Lime, Red and Yellow Bunny Pattern {Regular to Alternate} {match ID 0 to 1}

Comments from Submitter:
I recently bought a second hand set (no box or instructions)

This is no reliable source to check parts variants.

which had every part of this set correct except that this sleeping bag was the two tone version rather than multi-coloured version. This is backed up by some pictures of set 2818 on the internet.

I wasn't able to find any good source confirming this change. This request
will be rejected because for now there is no proof from reliable source confirming
this but I will keep it open for a few days more maybe somebody else will find
better proof that this part was in new sealed set.

Author:

Hygrotus

Posted:

Dec 12, 2018 02:00

Subject:

Re: Inventory Change Request for Set 8067-1

Viewed:

24 times

Topic:

In Inventories Requests, normann1974 writes:

Please make changes to the following inventory:

8067-1 (Inv) Mini Mobile Crane
292 Parts, 2011
Sets: Technic: Model: Construction

x77ac50 String, Cord Thin 50cm
Parts: String & Net

x77ac100 String, Cord Thin 100cm
Parts: String & Net

x77ac420 String, Cord Thin 420cm
Parts: String & Net

so three of totaly different lenght

quite diffrent like 50 cm and 420 cm

Author:

ANFRICKE20

Posted:

Dec 12, 2018 00:07

Subject:

Space helmetsSpace 2nd post

Viewed:

94 times

Topic:

Status:

Open

Thanks for everyone for looking and responding.i took a picture of the helmets
that only have one dimple. I have 30 of them all blue with the dimple on the
right side. They are not teeth marks. These helmets all are in great shape some
most never been on a minifig.
My question is how would I put it in my store on bricklink. Thanks adam

Author:

samsam2

Posted:

Dec 11, 2018 22:02

Subject:

Re: Inventory Change Request for Set 8269-1

Viewed:

31 times

Topic:

In Inventories Requests, samsam2 writes:

Please make changes to the following inventory:

8269-1 (Inv) Cyber Stinger
327 Parts, 1 Minifigure, 1999
Sets: Technic: Competition

drawers with the parts from this set.

Comments from Submitter:
I parted out from a sealed set, just the purple model in its own sealed box. The turquoise model was missing.

Author:

Hygrotus

Posted:

Dec 11, 2018 16:00

Subject:

Re: Inventory Change Request for Set 8678-1

Viewed:

20 times

Topic:

In Inventories Requests, therobo writes:

Please make changes to the following inventory:

8678-1 (Inv) Ultimate Build Francesco
166 Parts, 1 Minifigure, 2011
Sets: Cars: Cars 2

* Add 1 Part 30350cpb033L White Tile, Modified 2 x 3 with 2 Clips (thick U clips) with 'FR ALL FOR ONE allinol' Pattern Model Left Side (Sticker) - Set 8678 (Counterpart)
* Add 1 Part 30350cpb033R White Tile, Modified 2 x 3 with 2 Clips (thick U clips) with 'FR ALL FOR ONE allinol' Pattern Model Right Side (Sticker) - Set 8678 (Counterpart)

After verification of this part variant in this set
https://www.bricklink.com/message.asp?ID=1119281
I can approve this stickered counterparts for it.
"c" variant confirmed in this set.

Author:

Hygrotus

Posted:

Dec 11, 2018 15:58

Subject:

Re: Inventory Change Request for Set 8678-1

Viewed:

15 times

Topic:

In Inventories Requests, Hygrotus writes:

Please make changes to the following inventory:

8678-1 (Inv) Ultimate Build Francesco
166 Parts, 1 Minifigure, 2011
Sets: Cars: Cars 2

* Add 2 Part 30350c White Tile, Modified 2 x 3 with 2 Clips (thick U clips) (Alternate) (match ID 1)
* Change 2 Part White {30350 Tile, Modified 2 x 3 with 2 Clips - (MARKED FOR DELETION - Undetermined Clip Type Version) to 30350a Tile, Modified 2 x 3 with 2 Clips (angled clips)} {match ID 0 to 1}
* Change 2 Part White {44302 Hinge Plate 1 x 2 Locking with 2 Fingers on End (Undetermined Type) to 44302a Hinge Plate 1 x 2 Locking with 2 Fingers on End with Bottom Groove}

Comments from Submitter:
Additional informations to follow.

https://www.youtube.com/watch?v=EiKKcuVYcMo
First speed build review. Sealed set contents. Set and bags opened in front of
the camera.
44302 variant "a" visible time 0:40 (photo 1 and 2)
30350 variant "c" visible time 2:04 (photo 3)

https://www.youtube.com/watch?v=Zxl03-1oBUE
Second speed build review. Sealed set contents. Bags opened in front of the camera.
30350 variant "a" visible time 2:17 (photo 4)

Close up

Author:

Hygrotus

Posted:

Dec 11, 2018 15:56

Subject:

Re: Inventory Change Request for Set 8678-1

Viewed:

18 times

Topic:

In Inventories Requests, Hygrotus writes:

Please make changes to the following inventory:

8678-1 (Inv) Ultimate Build Francesco
166 Parts, 1 Minifigure, 2011
Sets: Cars: Cars 2

Author:

Hygrotus

Posted:

Dec 11, 2018 15:50

Subject:

Inventory Change Request for Set 8678-1

Viewed:

24 times

Topic:

Status:

Open

Please make changes to the following inventory:

8678-1 (Inv) Ultimate Build Francesco
166 Parts, 1 Minifigure, 2011
Sets: Cars: Cars 2

Author:

Hygrotus

Posted:

Dec 11, 2018 15:40

Subject:

Re: Inventory Change Request for Set 60147-1

Viewed:

20 times

Topic:

In Inventories Requests, StormChaser writes:

In Inventories Requests, Hygrotus writes:

Sticker should be on 1x6 white tile (part 6636)

It was easily fixed. Now it's a 1 x 6 tile.

Thankss for quick fix

Author:

StormChaser

Posted:

Dec 11, 2018 15:37

Subject:

Re: Inventory Change Request for Set 60147-1

Viewed:

18 times

Topic:

In Inventories Requests, Hygrotus writes:

Sticker should be on 1x6 white tile (part 6636)

It was easily fixed. Now it's a 1 x 6 tile.

Author:

Hygrotus

Posted:

Dec 11, 2018 15:31

Subject:

Re: Inventory Change Request for Set 60147-1

Viewed:

50 times

Topic:

In Inventories Requests, therobo writes:

Please make changes to the following inventory:

60147-1 (Inv) Fishing Boat
134 Parts, 2 Minifigures, 2017
Sets: Town: City: Harbor

* Add 1 Part 4162pb194 White Tile 1 x 8 with 'Mary' in Black Cursive Pattern (Sticker) - Set 60147-1 (Counterpart)

Sticker is applied on the wrong part. There is no
white tile

4162 Tile 1 x 8
Parts: Tile

in the inventory of this set.

This set have only these tiles:

2431 Tile 1 x 4
Parts: Tile

and

6636 Tile 1 x 6
Parts: Tile

in white

Sticker should be on 1x6 white tile (part 6636)

Author:

normann1974

Posted:

Dec 11, 2018 14:57

Subject:

Inventory Change Request for Set 8067-1

Viewed:

30 times

Topic:

Status:

Open

Please make changes to the following inventory:

8067-1 (Inv) Mini Mobile Crane
292 Parts, 2011
Sets: Technic: Model: Construction

Author:

randyf

Posted:

Dec 11, 2018 14:55

Subject:

Re: Inventory Change Request for Set 40388-1

Viewed:

20 times

Topic:

In Inventories Requests, pikachu3 writes:

Please make changes to the following inventory:

40388-1 (Inv) Mini-Doll Dress-Up Kit
80 Parts, 2018
Sets: Disney: Disney Princess: Supplemental

* Change 1 Part {Very Light Bluish Gray to Light Aqua} 20375 Mini Doll, Cape Cloth, Friends, Tapered with Curved Bottom and 1 Small Top Hole

Comments from Submitter:
VLBG has been retired for a while. https://brickset.com/sets/40388-1/Mini-Doll-Dress-Up-Kit

There is a lot messed up in the catalog with this cape and some others. This
request will take a little time to sort out. Thanks for your patience.

Cheers,
Randy

Author:

mjwest83

Posted:

Dec 11, 2018 12:51

Subject:

Inventory Change Request for Set 30448-1

Viewed:

22 times

Topic:

Status:

Open

Please make changes to the following inventory:

30448-1 (Inv) Spider-Man Vs. The Venom Symbiote polybag
46 Parts, 1 Minifigure, 2016
Sets: Super Heroes: Spider-Man

* Add 1 Part spa0025 (Not Applicable) Venom Symbiote - Set 30448 (Counterpart)

Author:

mjwest83

Posted:

Dec 11, 2018 12:50

Subject:

Inventory Change Request for Set 31048-1

Viewed:

11 times

Topic:

Status:

Open

Please make changes to the following inventory:

31048-1 (Inv) Lakeside Lodge
364 Parts, 1 Minifigure, 2016
Sets: Creator: Model: Building

* Add 1 Part moose01 (Not Applicable) Moose - Set 31048 (Counterpart)

Author:

mjwest83

Posted:

Dec 11, 2018 12:49

Subject:

Inventory Change Request for Set 31051-1

Viewed:

14 times

Topic:

Status:

Open

Please make changes to the following inventory:

31051-1 (Inv) Lighthouse Point
520 Parts, 2 Minifigures, 2016
Sets: Creator: Model: Building

* Add 1 Part whale01 (Not Applicable) Killer Whale - Set 31051 (Counterpart)

Author:

mjwest83

Posted:

Dec 11, 2018 12:48

Subject:

Inventory Change Request for Set 31052-1

Viewed:

17 times

Topic:

Status:

Open

Please make changes to the following inventory:

31052-1 (Inv) Vacation Getaways
784 Parts, 2 Minifigures, 2016
Sets: Creator: Model: Recreation

* Add 1 Part bear01 (Not Applicable) Bear - Set 31052 (Counterpart)

Author:

mjwest83

Posted:

Dec 11, 2018 12:22

Subject:

Inventory Change Request for Set 76099-1

Viewed:

14 times

Topic:

Status:

Open

Please make changes to the following inventory:

76099-1 (Inv) Rhino Face-Off by the Mine
218 Parts, 3 Minifigures, 2018
Sets: Super Heroes: Black Panther

* Add 2 Part 11477pb062 Light Bluish Gray Slope, Curved 2 x 1 No Studs with 5 Dark Bluish Gray Rectangles Pattern (Sticker) - Set 76099 (Counterpart)
* Add 1 Part 11477pb063L Light Bluish Gray Slope, Curved 2 x 1 No Studs with Dark Bluish Gray Eye Cover and Metallic Gold Decorative Pattern Model Left Side (Sticker) - Set 76099 (Counterpart)
* Add 1 Part 11477pb063R Light Bluish Gray Slope, Curved 2 x 1 No Studs with Dark Bluish Gray Eye Cover and Metallic Gold Decorative Pattern Model Right Side (Sticker) - Set 76099 (Counterpart)
* Add 2 Part 15068pb155 Light Bluish Gray Slope, Curved 2 x 2 No Studs with Gold and Light Bluish Gray Panel Pattern (Sticker) - Set 76099 (Counterpart)
* Add 1 Part 24309pb010 Light Bluish Gray Slope, Curved 3 x 2 No Studs with Dark Bluish Gray Vent Grille, Gold Decoration and Dark Bluish Gray Panels Pattern (Sticker) - Set 76099 (Counterpart)
* Add 2 Part 14769pb240 Light Bluish Gray Tile, Round 2 x 2 with Bottom Stud Holder with Gold and Light Bluish Gray Panel Pattern (Sticker) - Set 76099 (Counterpart)
* Add 1 Part 14769pb241L Light Bluish Gray Tile, Round 2 x 2 with Bottom Stud Holder with Light Bluish Gray Panel on Gold Decorative Background Pattern Model Left Side (Sticker) - Set 76099 (Counterpart)
* Add 1 Part 14769pb241R Light Bluish Gray Tile, Round 2 x 2 with Bottom Stud Holder with Light Bluish Gray Panel on Gold Decorative Background Pattern Model Right Side (Sticker) - Set 76099 (Counterpart)
* Add 2 Part 98835pb020 Dark Bluish Gray Vehicle, Mudguard 3 x 4 x 1 2/3 Curved Front with 3 Reddish Brown Belts Pattern (Sticker) - Set 76099 (Counterpart)

Comments from Submitter:
Stickered parts.

Author:

therobo

Posted:

Dec 11, 2018 11:19

Subject:

Inventory Change Request for Set 75827-1

Viewed:

20 times

Topic:

Status:

Open

Please make changes to the following inventory:

75827-1 (Inv) Firehouse Headquarters
4593 Parts, 10 Minifigures, 2016
Sets: Ghostbusters

* Add 1 Part 60601pb018 White Glass for Window 1 x 2 x 2 with Pixelated Ghostbusters Logo and 'PLAY' Pattern (Sticker) - Set 75827 (Counterpart)

Author:

therobo

Posted:

Dec 11, 2018 11:18

Subject:

Inventory Change Request for Set 8678-1

Viewed:

17 times

Topic:

Status:

Open

Please make changes to the following inventory:

8678-1 (Inv) Ultimate Build Francesco
166 Parts, 1 Minifigure, 2011
Sets: Cars: Cars 2

Author:

therobo

Posted:

Dec 11, 2018 11:17

Subject:

Inventory Change Request for Set 60147-1

Viewed:

23 times

Topic:

Status:

Open

Please make changes to the following inventory:

60147-1 (Inv) Fishing Boat
134 Parts, 2 Minifigures, 2017
Sets: Town: City: Harbor

* Add 1 Part 4162pb194 White Tile 1 x 8 with 'Mary' in Black Cursive Pattern (Sticker) - Set 60147-1 (Counterpart)

Author:

pikachu3

Posted:

Dec 11, 2018 10:28

Subject:

Inventory Change Request for Set 40388-1

Viewed:

21 times

Topic:

Status:

Open

Please make changes to the following inventory:

40388-1 (Inv) Mini-Doll Dress-Up Kit
80 Parts, 2018
Sets: Disney: Disney Princess: Supplemental

Author:

bje

Posted:

Dec 11, 2018 09:30

Subject:

Re: Inventory Change Request for Set 8866-1

Viewed:

14 times

Topic:

Image:

Author:

bje

Posted:

Dec 11, 2018 09:27

Subject:

Inventory Change Request for Set 8866-1

Viewed:

21 times

Topic:

Status:

Open

Please make changes to the following inventory:

8866-1 (Inv) Train Motor (RC)
7 Parts, 2009
Sets: Train: Supplemental: RC Train

* Add 1 Part x1688pb01 Black Electric, Train Motor 9V RC Train (motor only, no attached wheels) with Red Stripe Pattern (Alternate) (match ID 1)
* Change 1 Part Black x1688 Electric, Train Motor 9V RC Train (motor only, no attached wheels) {match ID 0 to 1}

Comments from Submitter:
From MISB - image to follow.

Author:

samsam2

Posted:

Dec 10, 2018 20:46

Subject:

Inventory Change Request for Set 8269-1

Viewed:

25 times

Topic:

Status:

Open

Please make changes to the following inventory:

8269-1 (Inv) Cyber Stinger
327 Parts, 1 Minifigure, 1999
Sets: Technic: Competition

* Change 2 Part Light Gray {6538 Technic, Axle Connector 2L (Ridged Undetermined Type) to 6538b Technic, Axle Connector 2L (Ridged with x Hole x Orientation)}
* Change 2 Part Dark Gray {731c01 Technic, Shock Absorber 6.5L, Complete Assembly - Undetermined Spring Type to 731c06 Technic, Shock Absorber 6.5L, Complete Assembly - Soft Spring}

Comments from Submitter:
I parted out from a sealed set, just the purple model in its own sealed box. The turquoise model was missing.

Author:

axaday

Posted:

Dec 10, 2018 18:49

Subject:

Re: Inventory Change Request for Set 8857-1

Viewed:

17 times

Topic:

In Inventories Requests, axaday writes:

Please make changes to the following inventory:

8857-1 (Inv) Street Chopper
376 Parts, 1993
Sets: Technic: Model: Riding Cycle

* Delete 2 Part 2997 Black Tire 81.6 x 34 ZR Technic Straight Tread
* Delete 2 Part 2998 White Wheel 81.6 x 34 Six Spoke
* Change 2 Part White 2998c01 Wheel 81.6 x 34, with Black Tire 81.6 x 34 Technic (2998 / 2997) {Counterpart to Regular}

Comments from Submitter:
They come assembled in the set.

Author:

axaday

Posted:

Dec 10, 2018 18:47

Subject:

Inventory Change Request for Set 8857-1

Viewed:

23 times

Topic:

Status:

Open

Please make changes to the following inventory:

8857-1 (Inv) Street Chopper
376 Parts, 1993
Sets: Technic: Model: Riding Cycle

Author:

axaday

Posted:

Dec 10, 2018 18:42

Subject:

Re: Inventory Change Request for Set 8857-1

Viewed:

13 times

Topic:

In Inventories Requests, axaday writes:

Please make changes to the following inventory:

8857-1 (Inv) Street Chopper
376 Parts, 1993
Sets: Technic: Model: Riding Cycle

* Change 1 Part Light Gray {731c01 Technic, Shock Absorber 6.5L, Complete Assembly - Undetermined Spring Type to 731c06 Technic, Shock Absorber 6.5L, Complete Assembly - Soft Spring}
* Change 4 Part Light Gray {6538 Technic, Axle Connector 2L (Ridged Undetermined Type) to 6538a Technic, Axle Connector 2L (Ridged with + Hole + Orientation)}
* Change 2 Part Light Gray {2536 Plant, Tree Palm Trunk - (MARKED FOR DELETION - Undetermined Connector Version) to 2536c Plant, Tree Palm Trunk - Short Connector, Axle Hole with 4 Inside Prongs}

Comments from Submitter:
Sealed Set, Pics to Follow

Author:

axaday

Posted:

Dec 10, 2018 18:37

Subject:

Inventory Change Request for Set 8857-1

Viewed:

18 times

Topic:

Status:

Open

Please make changes to the following inventory:

8857-1 (Inv) Street Chopper
376 Parts, 1993
Sets: Technic: Model: Riding Cycle

Author:

axaday

Posted:

Dec 10, 2018 18:22

Subject:

Inventory Change Request for Set 6403-1

Viewed:

13 times

Topic:

Status:

Open

Please make changes to the following inventory:

6403-1 (Inv) Paradise Playground
82 Parts, 3 Minifigures, 1993
Sets: Town: Paradisa

* Add 1 Part 3673 Light Gray Technic, Pin without Friction Ridges Lengthwise (Extra)
* Add 1 Part 4073 Yellow Plate, Round 1 x 1 Straight Side (Extra)

Comments from Submitter:
Sealed set (not anymore)

Author:

normann1974

Posted:

Dec 10, 2018 17:54

Subject:

Inventory Change Request for Set 60197-1

Viewed:

19 times

Topic:

Status:

Open

Please make changes to the following inventory:

60197-1 (Inv) Passenger Train
661 Parts, 4 Minifigures, 2018
Sets: Train: RC Train

* Add 10 Part bb219 Dark Bluish Gray Train, Track Plastic (RC Trains) Connection/Stacking Pin for Track Storage (Extra)
* Change 1 Part Black {44302 Hinge Plate 1 x 2 Locking with 2 Fingers on End (Undetermined Type) to 44302b Hinge Plate 1 x 2 Locking with 2 Fingers on End without Bottom Groove}
* Change 1 Part Light Bluish Gray {44302 Hinge Plate 1 x 2 Locking with 2 Fingers on End (Undetermined Type) to 44302b Hinge Plate 1 x 2 Locking with 2 Fingers on End without Bottom Groove}

Comments from Submitter:
I just bought this set MISB. I contained ungrooved version of the hinge plates and 10 stacking pins.

Author:

axaday

Posted:

Dec 10, 2018 17:45

Subject:

Re: Inventory Change Request for Set 6403-1

Viewed:

23 times

Topic:

In Inventories Requests, axaday writes:

Please make changes to the following inventory:

6403-1 (Inv) Paradise Playground
82 Parts, 3 Minifigures, 1993
Sets: Town: Paradisa

* Change 6 Part Brown {2536 Plant, Tree Palm Trunk - (MARKED FOR DELETION - Undetermined Connector Version) to 2536b Plant, Tree Palm Trunk - Short Connector, no Axle Hole}

Comments from Submitter:
Sealed Set, Pics following

Author:

axaday

Posted:

Dec 10, 2018 17:43

Subject:

Inventory Change Request for Set 6403-1

Viewed:

26 times

Topic:

Status:

Open

Please make changes to the following inventory:

6403-1 (Inv) Paradise Playground
82 Parts, 3 Minifigures, 1993
Sets: Town: Paradisa

Author:

randyf

Posted:

Dec 10, 2018 14:56

Subject:

Re: Inventory Change Request for Set 6338-1

Viewed:

21 times

Topic:

In Inventories Requests, axaday writes:

Please make changes to the following inventory:

6338-1 (Inv) Hurricane Harbor
350 Parts, 3 Minifigures, 1995
Sets: Town: Classic Town: Coast Guard

* Change 1 Part Black 4285b Dish 6 x 6 Inverted (Radar) Webbed - Type 2 (underside attachment positions at 90 degrees) {match ID 0 to 1}
* Change 1 Part Black 4285a Dish 6 x 6 Inverted (Radar) Webbed - Type 1 (underside attachable at any position) (Alternate) {match ID 0 to 1}

Comments from Submitter:
I just noticed that the alternate isn't matched up. I didn't know that was possible, but I'm assuming it should be corrected.

And it has been that way since June 11, 2009. Nice catch!

Author:

axaday

Posted:

Dec 10, 2018 14:50

Subject:

Inventory Change Request for Set 6338-1

Viewed:

20 times

Topic:

Status:

Open

Please make changes to the following inventory:

6338-1 (Inv) Hurricane Harbor
350 Parts, 3 Minifigures, 1995
Sets: Town: Classic Town: Coast Guard

Author:

randyf

Posted:

Dec 10, 2018 14:25

Subject:

Re: Inventory Change Request for Set 4738-1

Viewed:

19 times

Topic:

In Inventories Requests, mjwest83 writes:

Please make changes to the following inventory:

4738-1 (Inv) Hagrid's Hut (3rd edition)
427 Parts, 4 Minifigures, 2010
Sets: Harry Potter

* Delete 8 Part 44302 Black Hinge Plate 1 x 2 Locking with 2 Fingers on End (Undetermined Type)
* Add 8 Part 44302a Black Hinge Plate 1 x 2 Locking with 2 Fingers on End with Bottom Groove

Comments from Submitter:
The piece has the groove on the short end opposite the two teeth.

I found an unboxing and building video review:

https://www.youtube.com/watch?v=htzWKyr-UWc&t

There are three separate times in the video when I was able to see the end of
three different 44302's as they reviewed the Aragog figure. All of them had
the groove.

Cheers,
Randy

Author:

samsam2

Posted:

Dec 10, 2018 14:01

Subject:

Inventory Change Request for Minifig sw534

Viewed:

36 times

Topic:

Status:

Open

Author:

SezaR

Posted:

Dec 10, 2018 06:33

Subject:

Re: Inventory Change Request for Set 6394-1

Viewed:

14 times

Topic:

In Inventories Requests, SezaR writes:

Please make changes to the following inventory:

6394-1 (Inv) Metro Park & Service Tower
566 Parts, 6 Minifigures, 1988
Sets: Town: Classic Town: Gas Station

* Delete 18 Part 3641 Black Tire 15mm D. x 6mm Offset Tread Small
* Delete 6 Part 4624 Light Gray Wheel 8mm D. x 6mm
* Delete 12 Part 4624 White Wheel 8mm D. x 6mm
* Change 6 Part Light Gray 4624c02 Wheel 8mm D. x 6mm with Black Tire 15mm D. x 6mm Offset Tread Small (4624 / 3641) {Counterpart to Regular}
* Change 12 Part White 4624c02 Wheel 8mm D. x 6mm with Black Tire 15mm D. x 6mm Offset Tread Small (4624 / 3641) {Counterpart to Regular}

Author:

SezaR

Posted:

Dec 10, 2018 06:32

Subject:

Inventory Change Request for Set 6394-1

Viewed:

16 times

Topic:

Status:

Open

Please make changes to the following inventory:

6394-1 (Inv) Metro Park & Service Tower
566 Parts, 6 Minifigures, 1988
Sets: Town: Classic Town: Gas Station

Author:

randyf

Posted:

Dec 10, 2018 02:11

Subject:

Re: Inventory Change Request for Set 7251-1

Viewed:

16 times

Topic:

In Inventories Requests, chrislottlego writes:

Please make changes to the following inventory:

7251-1 (Inv) Darth Vader Transformation
32 Parts, 3 Minifigures, 2005
Sets: Star Wars: Star Wars Episode 3

* Delete 1 Part 6246f Dark Bluish Gray Minifigure, Utensil Tool Oil Can - Smooth Handle

Comments from Submitter:
Please re-check the inventory, I have this Transformation set and while it definitely includes 5 dark bluish gray tools, it does not seem to have this little oil can, the instructions do not show the oil can on any page.

Thanks for your time and trouble, your inventories have been an ENORMOUS help to me.

The oil can in the set comes as part of
[p=6246c01]

The whole tool wheel is included as a regular part in every one of these sets.
However, only five out of the six tools on the tool wheel are used in
[m=sw144]

Normally, the whole tool wheel would be listed in the Regular Items section,
but it can't because some of the tools are in the minifig. Due to the current
limitations of the inventory system, the oil can must remain in the Regular Items
section to complete the "whole" tool wheel when the ones from the minifigure
are combined with it.

Since the inventory is correct according to current inventory policy, this request
will be rejected.

Cheers,
Randy

Author:

Hygrotus

Posted:

Dec 10, 2018 01:48

Subject:

Re: Inventory Change Request for Minifig hol045

Viewed:

17 times

Topic:

In Inventories Requests, Henk61 writes:

In Inventories Requests, Hygrotus writes:

Please make changes to the following inventory:

Minifig No: hol045 Name: Elf (Undetermined Type)

hol045 Elf (Undetermined Type)
Minifigures: Holiday & Event: Christmas
Marked for Deletion

* Change 1 Part Yellow {3626cpb0278 Minifig, Head Brown Eyebrows, White Pupils, Lopsided Smile with Black Dimple Pattern - Stud Recessed to 3626cpb1286 Minifig, Head Brown Eyebrows, White Pupils, Lopsided Smile with Brown Dimple Pattern - Stud Recessed}

Comments from Submitter:
Also wrong head, also can be seen on photo

Please make this change for HOL045 undone.
I have the Original set and the minifigure HOL045 has a BLACK dimple pattern
and NOT and Brown dimple pattern.
The main picture of the HOL045 with the black dimple pattern is correct.
So the number for the head is 3626cpb0278 (hollow stud)

It has been fixed, thanks for catching this.
https://www.bricklink.com/message.asp?ID=1119103

Author:

Hygrotus

Posted:

Dec 10, 2018 01:47

Subject:

Inventory Change Request for Set 10245-1

Viewed:

32 times

Topic:

Status:

Open

Please make changes to the following inventory:

10245-1 (Inv) Santa's Workshop
857 Parts, 6 Minifigures, 2014
Sets: Creator: Creator Expert: Winter Village Collection: Holiday & Event: Christmas

* Delete 1 Minifig hol045 Elf - (MARKED FOR DELETION - Undetermined Head Type)
* Add 1 Minifig hol045a Elf - Blue Overalls, Black Dimple (match ID 15)
* Add 1 Minifig hol045b Elf - Blue Overalls, Brown Dimple (Alternate) (match ID 15)

Comments from Submitter:
https://www.bricklink.com/message.asp?ID=1119033

This set in true came with both heads variants, there are copies with brown dimple
head and copies with black dimple head.
Brown dimple head can be seen here:
- https://youtu.be/vjnzX0OVPTc?t=5m35s - speed build and review from sealed set
contents, bags opened in front of the camera
- https://youtu.be/pxr7HBznFmQ?t=6m9s speed build from sealed set contents, bags
opened in front of the camera, but head attached to wrong elf.
- in this review made by WhiteFang https://www.eurobricks.com/forum/index.php?/forums/topic/99940-review-10245-santas-workshop/
- in Brickset review
https://brickset.com/article/12282/review-10245-santa-s-workshop

Black dimple head can be seen here:
- https://youtu.be/S025eCeAHG4?t=7m54s review from sealed set contents
- Jangbricks review https://youtu.be/PjKRq1_K-aM?t=9m6s

Author:

randyf

Posted:

Dec 10, 2018 01:25

Subject:

Re: Inventory Change Request for Set 1560-1

Viewed:

17 times

Topic:

In Inventories Requests, randyf writes:

Please make changes to the following inventory:

1560-1 (Inv) Glory Glider polybag
19 Parts, 1 Minifigure, 1990
Sets: Town: Classic Town: Airport

* Delete 2 Part 3139 Black Tire 14mm D. x 4mm Smooth Small Single
* Delete 2 Part 4624 Light Gray Wheel 8mm D. x 6mm
* Change 2 Part Light Gray 4624c01 Wheel 8mm D. x 6mm with Black Tire 14mm D. x 4mm Smooth Small Single (4624 / 3139) {Counterpart to Regular}

Comments from Submitter:
Image to follow.

Author:

randyf

Posted:

Dec 10, 2018 01:25

Subject:

Inventory Change Request for Set 1560-1

Viewed:

23 times

Topic:

Status:

Open

Please make changes to the following inventory:

1560-1 (Inv) Glory Glider polybag
19 Parts, 1 Minifigure, 1990
Sets: Town: Classic Town: Airport

Author:

randyf

Posted:

Dec 10, 2018 00:56

Subject:

Re: Inventory Change Request for Set 6990-1

Viewed:

19 times

Topic:

In Inventories Requests, FreeStorm writes:

Please make changes to the following inventory:

6990-1 (Inv) Futuron Monorail Transport System
692 Parts, 5 Minifigures, 1987
Sets: Space: Futuron

* Delete 6 Part 4073 Trans-Dark Blue Plate, Round 1 x 1 Straight Side
* Add 3 Part 4073c01 Trans-Dark Blue Plate, Round 1 x 1, 2 on Sprue
* Delete 10 Part 4073 Trans-Red Plate, Round 1 x 1 Straight Side
* Add 5 Part 4073c01 Trans-Red Plate, Round 1 x 1, 2 on Sprue

Comments from Submitter:
Source file:

http://www.brickshelf.com/gallery/CP5670/SetParts/6990-06.jpg
http://www.brickshelf.com/gallery/CP5670/SetParts/6990-08.jpg
http://www.brickshelf.com/gallery/CP5670/SetParts/6990-10.jpg
http://www.brickshelf.com/gallery/CP5670/SetParts/6990-11.jpg

Images added for future reference if hyperlinks become unusable.

Author:

StormChaser

Posted:

Dec 10, 2018 00:54

Subject:

Inventory Change Request for Set 8091-1

Viewed:

22 times

Topic:

Status:

Open